|
09-30-2014, 10:56 PM
|
#1
|
Senior Member
Join Date: Jul 2009
Location: Silverdale, Washington
Trailer: No more Escape 21
Posts: 412
|
Jack Antenna and Trailer Cover
Reading the thread and posts on "TV Antenna" and with winter soon coming, got me thinking: how to not put a strain on the Jack antenna with the cover. The Jack antenna is about foot tall and about 16" wide. A cover over the antenna surely would put pressure on the antenna. First thought was to make a box structure to encase the antenna and with suitable padding between the Escape and the box structure. Wonder if anyone has already solved this situation. So has anyone that has the Jack antenna use a cover and if so, how do you keep the cover from putting undo strain on the antenna?
__________________
2008 Toyota Highlander
|
|
|
09-30-2014, 11:31 PM
|
#2
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
Sounds like a fairly large plastic tub like one could find at a nursery should work. A trimmed down 5 gallon bucket might be a little small.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
10-01-2014, 06:07 AM
|
#3
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Round laundry basket??
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
10-01-2014, 08:21 AM
|
#4
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
Perfecto!
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
10-01-2014, 10:44 AM
|
#5
|
Senior Member
Join Date: Sep 2010
Location: Kelowna, British Columbia
Trailer: 2008 Escape 17b
Posts: 1,868
|
I cut the top off the 9.47L RV Antifreeze container, put pipe insolation on the edges and placed it over the cyclone sewer vent that I installed this spring. The Classic Accessories trailer cover went over without a snag. BTW, this is the 5th year for this cover and it is beginning to tear in places. In the torn area(s) I clothespined the material together then silicone glued between the two layers of material. 24 hours later I removed the pins and all was good for at least one more year.
|
|
|
10-02-2014, 11:10 PM
|
#6
|
Senior Member
Join Date: May 2012
Location: Nanoose Bay, British Columbia
Trailer: 2014 5.0 TA
Posts: 152
|
Quote:
Originally Posted by RickM
Reading the thread and posts on "TV Antenna" and with winter soon coming, got me thinking: how to not put a strain on the Jack antenna with the cover. The Jack antenna is about foot tall and about 16" wide. A cover over the antenna surely would put pressure on the antenna. First thought was to make a box structure to encase the antenna and with suitable padding between the Escape and the box structure. Wonder if anyone has already solved this situation. So has anyone that has the Jack antenna use a cover and if so, how do you keep the cover from putting undo strain on the antenna?
|
Hi Rick,
I found a 16" H x 16" Diameter nursery plant pot & cut 4" off the bottom, leaving 12" in height... slightly higher than the antenna.
Should work...
Larry
|
|
|
10-02-2014, 11:58 PM
|
#7
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Interesting. What about cutting it below the rim instead of cutting out the bottom? The cover might slide over it better without an edge there.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
10-03-2014, 03:06 AM
|
#8
|
Senior Member
Join Date: May 2012
Location: Nanoose Bay, British Columbia
Trailer: 2014 5.0 TA
Posts: 152
|
Quote:
Originally Posted by rbryan4
Interesting. What about cutting it below the rim instead of cutting out the bottom? The cover might slide over it better without an edge there.
|
Good thought rbryan4, but the pot is tapered... so when I first placed it over the antenna, it got hung up. But with the 4" cut off, it fits perfectly. One can probably find these in most, if not all, nurseries. As addition info, these pots are made in the States...
Larry
|
|
|
10-03-2014, 03:09 AM
|
#9
|
Senior Member
Join Date: May 2012
Location: Nanoose Bay, British Columbia
Trailer: 2014 5.0 TA
Posts: 152
|
PS: When the cover goes on, the pot should take the cover's weight off the antenna...
Larry
|
|
|
10-03-2014, 08:18 AM
|
#10
|
Senior Member
Join Date: Apr 2012
Location: Edmonton, Alberta
Trailer: 2013 19' & 2013 15B
Posts: 2,634
|
Quote:
Originally Posted by Stargeezer
PS: When the cover goes on, the pot should take the cover's weight off the antenna...
Larry
|
I would find a foam pool noodle or similar piece of foam to place along the upper edge of your pot so that the sharp cut edge on the pot does not wear through your trailer cover. Another noodle on the bottom of your pot would protect the fiberglass on your trailer roof from being scratched by the pot.
__________________
2013 19' \ 2013 15B, 2020 Toyota 4Runner TRD Offroad
"It is better to remain silent at the risk of being thought a fool, than to talk and remove all doubt of it." - 1907, Maurice Switzer
|
|
|
10-03-2014, 08:56 AM
|
#11
|
Senior Member
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 8,035
|
Quote:
Originally Posted by ice-breaker
I would find a foam pool noodle or similar piece of foam to place along the upper edge of your pot so that the sharp cut edge on the pot does not wear through your trailer cover. Another noodle on the bottom of your pot would protect the fiberglass on your trailer roof from being scratched by the pot.
|
Hi: ice-breaker... Simple solution is to slice the pool noodle length wise and slip over the edge of the antenna. Cut to fit the length of edges needed... No "Pot" required!!! Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
|
|
|
10-03-2014, 10:52 AM
|
#12
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Larry,
Why not just turn the bucket over, it appears the original open top is already rounded and should not hurt the cover, but now you may want to protect the camper from the ragged edge, maybe melt the edge to smooth it out?
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
10-03-2014, 12:32 PM
|
#13
|
Senior Member
Join Date: May 2012
Location: Nanoose Bay, British Columbia
Trailer: 2014 5.0 TA
Posts: 152
|
All good suggestions folks... We all know the old expression that a camel is really a horse designed by committee. However, in our case, it's just the opposite... Good Stuff!
Keep it coming...
Larry
|
|
|
10-03-2014, 12:51 PM
|
#14
|
Member
Join Date: May 2013
Posts: 579
|
|
|
|
10-03-2014, 12:59 PM
|
#15
|
Senior Member
Join Date: Sep 2010
Location: Kelowna, British Columbia
Trailer: 2008 Escape 17b
Posts: 1,868
|
23" is a bit high don't you think?
|
|
|
10-03-2014, 03:25 PM
|
#16
|
Member
Join Date: May 2013
Posts: 579
|
It was just a thought, I do not cover the antennae just use the regular cover. I would be leery of anything sitting directly on the roof . In my opinion no matter how padded it is it would move under rain/snow load and wind etc scratching / grinding on surface of the unit.
Cypher
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|