Happy Days are Here Again

[Patandlinda]

Originally Posted by jamman

See the discussion at: http://www.escapeforum.org/forums/f3...zona-2499.html

We are very happy with it.

Google Springfield 1660230, second hit: Springfield 3 Stage table Pedestal #SPR-1660230

Thankyou ! Pat

[Patandlinda]

Originally Posted by rbryan4

We ordered the Springfield Marine 3 Stage gas filled also.

Springfield 3-Stage Air-Powered Table Pedestal - Overton's

It goes from about 11" to 28" in height. $319.99 USD with free shipping on Overtons, but if you put in the discount code of SAVE15 at checkout, they knock $48 off so the net price is $271.99. That's cheaper than I was able to find it anywhere.

Now all I have to do is find a free day to remove the current pedestals, install the Allure Vinyl Plank flooring, and install the new pedestal.

Robert Thankyou found that earlier but wasn't sure that was it . Much better then 685 . Going to get that one . Pat

[P&L]

I read an earlier post from Donna that deciding on the fabric was the most difficult decision she had to make----mine too! Now I have seen your seating area, my decision has become even more difficult! Your interior is stunning.

I love that ETI gives us the opportunity to put our own stamp on our trailer---no cookie cutter here!

[OneOleMan]

Originally Posted by rbryan4

We ordered the Springfield Marine 3 Stage gas filled also.

Springfield 3-Stage Air-Powered Table Pedestal - Overton's

It goes from about 11" to 28" in height. $319.99 USD with free shipping on Overtons, but if you put in the discount code of SAVE15 at checkout, they knock $48 off so the net price is $271.99. That's cheaper than I was able to find it anywhere.

Now all I have to do is find a free day to remove the current pedestals, install the Allure Vinyl Plank flooring, and install the new pedestal.

Thanks Robert, just what I was looking for.

[cpaharley2008]

What keeps these tables vertical while towing? How does one have to make it immobile?

[OneOleMan]

Originally Posted by cpaharley2008

What keeps these tables vertical while towing? How does one have to make it immobile?

It has a 12.5" base bolted to the floor which I think would make it pretty stable and if in doubt it'd be simple to lower it to bed height.

[cpaharley2008]

So it is permanently mounted, like the stock legs?

[windblade]

Originally Posted by P&L

I read an earlier post from Donna that deciding on the fabric was the most difficult decision she had to make----mine too! Now I have seen your seating area, my decision has become even more difficult! Your interior is stunning.

I love that ETI gives us the opportunity to put our own stamp on our trailer---no cookie cutter here!

Oh yes, I couldn't agree more. I think I spent as much money on ordering samples from Sailrite as I did on the actual fabric used in the trailer. I wonder if I could use all those samples to make a quilt for the bed; probably have enough pieces! (And thank you so much for the compliment).

Have a great day . . . Greg.

[rbryan4]

Originally Posted by cpaharley2008

So it is permanently mounted, like the stock legs?

Yes sir. 6 screws in the floor, with a flat 12" base. Solid as a rock -- much more solid than the stock poles/sockets.

[Jim Bennett]

Your trailer looks gorgeous inside. Very nice decorating.

While that table is kinda cool, it would never work for us. Way too small. We always seem to have at least half of our table full of stuff, more or less a marshalling point. This could be because it is so handy to our door in the 19 though.

[Mike Lewis]

I see you have the front window on your Escape 21. Does it open?

[cpaharley2008]

Mike, none of the front windows open on Escapes. Some of the older models may have an opening window, but they are no longer offered.

[Mike Lewis]

Originally Posted by cpaharley2008

Mike, none of the front windows open on Escapes. Some of the older models may have an opening window, but they are no longer offered.

Okay, then I guess I won't envy the front window as much. An opening front window would help cross-flow ventilation in the bedroom area of the 21.

[Patandlinda]

Originally Posted by Patandlinda

Thankyou ! Pat

Yeh ! Just got my Marine Springflield 3 stage pedestal from Overton's sale 20% off total 255.99 total just had to wait it was back ordered. Very nice . Think I am going to like . Pat

[seastar]

Hi Happy Days! What a unique idea and so very classy. Thanks for Sharing. Too bad your trailer has to go inside for awhile

Kathy

[Carla Jean]

If you lower the table to the lowest position of 12-¾, will that be the right height to lay across to make a bed?

[Patandlinda]

Originally Posted by Carla Jean

If you lower the table to the lowest position of 12-¾, will that be the right height to lay across to make a bed?

I haven't measured it . But I believe so . If you need more height which would be very small ,all that is needed add a ledger on top of the one already there . In our case we need 1 in more because we added a platform . Also added 3/4 in wood to bottom of slider to make slide stronger . Added 3 1/4 in to height of our benches . So we have made many mods to original . You could remove Escape ledge and add a wider piece . As soon as I can will post pics . Already installed and it looks really nice . Never fond of those poles either that were installed originally. The base is now very strong 12 in . The platform where your table installed is also the width of my slider . Also still can slide table side to side as before . Very happy . Pat

[Carla Jean]

Thanks! As you noted, the height can be increased easily, but it would be nice if the 12-¾ is the right height to make it good for lounging. Pictures would be nice! Will you be at the rally?

[Charlie & Lucy]

Originally Posted by Patandlinda

Yeh ! Just got my Marine Springflield 3 stage pedestal from Overton's sale 20% off total 255.99 total just had to wait it was back ordered. Very nice . Think I am going to like . Pat

Hi PatandLinda,
We ordered one this week too! Looks like it will be nice for lounging and pretty quick to do!

[Patandlinda]

Originally Posted by Carla Jean

Thanks! As you noted, the height can be increased easily, but it would be nice if the 12-¾ is the right height to make it good for lounging. Pictures would be nice! Will you be at the rally?

Unfortunately not this year . Just remembered I left the Escape installed table pole holders still screwed on floor . When I made my platform cut holes for poles to go through so installing my new table platform it is 3 1/2.higher then it was originally . My new table pedestal is sitting on the platform not floor . If it was on floor it would go down another 3 1/2 in then it is now . So I am pretty sure if installing on floor table will go down to original ledge without changing anything . I am leaving original pole holders in case I ever sell trailer ,taking my new table pedestal and putting original back . Pat