Originally Posted by burrab2002
i looked online at the honda engine set up with propane and it has the regulator on the side of the engine. will this work with the quick connect being a low pressure connection?
Yes, that could be an issue, depending on the pressures involved. The kit illustration shows one regulator on the propane tank, and a separate second-stage regulator which mounts on the engine. If the pressure between the two is higher than the standard RV low pressure (11" water column) then I would not expect the second regulator to work properly.
I use a tee to tap full tank pressure at the tanks, not an outlet on the trailer's low-pressure system, to supply an outside barbecue. That would work for the generator as well.