|
08-05-2019, 03:14 PM
|
#1
|
Member
Join Date: Nov 2017
Location: West Des Moines, Iowa
Trailer: 2023 21C' Escape
Posts: 36
|
Dsi flt
We recently had the DSI FLT light come on in the monitor panel. What does DSI FLT stand for and what does it mean when it comes on. I'm guessing it has to do with propane as when it was on none of the propane appliances worked. Both tanks were full when the light came on. I unhooked both tanks and then reconnected them and it seemed to cure the problem. Advice?
|
|
|
08-05-2019, 03:29 PM
|
#2
|
Senior Member
Join Date: Jul 2015
Location: Lewisburg, Tennessee
Trailer: 2016 Escape 19 Classic
Posts: 516
|
From an old Escape forum post: DSI means direct spark ignition. FLT means fault.
__________________
"Governments create nothing and have nothing to give but what they have first taken away....."
|
|
|
08-05-2019, 06:16 PM
|
#3
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
The Suburban SW6D(E) direct spark ignition (DSI) System tries three times to light before it locks out (fault). It could be that you had air in the line. If you flip the water heater switch off, wait 5 seconds, then switch it back on it will reset and give you three more tries. It sounds like you resolved the problem.
|
|
|
08-07-2019, 11:33 AM
|
#4
|
Member
Join Date: Nov 2017
Location: West Des Moines, Iowa
Trailer: 2023 21C' Escape
Posts: 36
|
Thanks for the information. Hoping that air in the line was the problem.
|
|
|
08-07-2019, 12:00 PM
|
#5
|
Senior Member
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 8,259
|
As you may know, opening the valves on the tanks real slowly sometimes helps to keep an air lock from happening. If I haven’t run things for a while on gas, I like to open a burner on my stove and light it. This will bleed off trapped air and allow the furnace or water heater to fire up more easily and sometimes the refrigerator too. YMMV
As Donna says.
Iowa Dave
__________________
Ain’t no trouble jacking a double Burma Shave
Dave
|
|
|
08-07-2019, 12:14 PM
|
#6
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
The advantage of lighting a stove burner first is that you can see the flame. it's right there, so you know the gas is flowing.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
08-07-2019, 02:01 PM
|
#7
|
Senior Member
Join Date: Nov 2008
Location: Janesville, WI, Wisconsin
Trailer: Escape 19 (sold) Escape 21 2014
Posts: 1,884
|
Quote:
Originally Posted by Iowa Dave
As you may know, opening the valves on the tanks real slowly sometimes helps to keep an air lock from happening. If I haven’t run things for a while on gas, I like to open a burner on my stove and light it. This will bleed off trapped air and allow the furnace or water heater to fire up more easily and sometimes the refrigerator too. YMMV
As Donna says.
Iowa Dave
|
Good advice Dave. Whenever I have a question about something gas powered working, usually the frig, I immediately light the cook stove. I think it happens more when changing out propane tanks, even being careful with physically switching the regulator to the full tank. Changing both tanks simultaneously might mean, light the cook stove before trying anything.
__________________
Paul and Janet Braun
2003 Toyota 4Runner V8 now 2012 Toyota Sequoia V8
Escape 19' 2010 now 2014 Escape 21'
|
|
|
08-07-2019, 10:23 PM
|
#8
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by Iowa Dave
As you may know, opening the valves on the tanks real slowly sometimes helps to keep an air lock from happening.
|
The rate that the tank valves are opened won't affect air in the lines, but too quickly can trip the excess flow valve in a tank hose (pigtail), requiring the valve to be closed to reset.
Tank valves don't really need to be opened slowly; they just need to be opened a bit so propane will slowly flow and pressurize the lines, then they can be opened the rest of the way as quickly as desired.
Quote:
Originally Posted by Iowa Dave
If I haven’t run things for a while on gas, I like to open a burner on my stove and light it. This will bleed off trapped air and allow the furnace or water heater to fire up more easily and sometimes the refrigerator too.
|
I use this stove burner technique as required after running out of propane to get the lines purged before expecting any other appliance to run properly.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|