Originally Posted by CADreamin
I have the U-shape seating at the rear of my 19 with the folding shelves mounted on both the fridge and the sink sides.
Hi Robert - Since you switched the dinette and the bed around (I'm assuming), how do you find the size of the new bed? From the dimensions on the Escape pages, it looks like making the front dinette your bed reduces the width of the bed to about 14" narrower than the double bed on the 21' (i.e., 40"x80" vs. 54"x80").
LOL.. It can be even smaller then that. I mentioned "u-shaped seating" deliberately.
I don't have a rear table (and it's associated hardware) installed. Just a semi permanent lounge that I can make up into a queen bed when extra sleeping accommodation is required.
Sleeping single here so I tend to sleep across the back in 26" bunk mode when not running AC/Heating Strip fan overnight.
When it gets hot/cold enough outside to have to run the polar cub fan continuously I move to the generously sized (for one :-) front dinette area.
Laying your head towards the drivers side tucks it well in behind the bathroom end wall which in-turn mitigates the constant fan noise enough to get both a good nights sleep and stay cool/warm at the same time.