|
|
10-04-2016, 07:45 PM
|
#61
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,550
|
Quote:
Originally Posted by KarenH
I'm still waiting for pictures of the retrofit he did of his daughter's trailer...
|
I should go take more photos, I have been meaning to.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
10-04-2016, 07:47 PM
|
#62
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
You need to get a new phone without a broken lens first.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
10-04-2016, 08:35 PM
|
#63
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,550
|
Quote:
Originally Posted by gbaglo
You need to get a new phone without a broken lens first.
|
I did that much.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
10-04-2016, 09:09 PM
|
#64
|
Senior Member
Join Date: Aug 2015
Location: Ponoka, Alberta
Trailer: 2016 19 classic "outta sight", jeep rubicon unlimited
Posts: 1,645
|
[QUOTE=Jim Bennett;163038]Just my temp one.
That's what I meant. Nice business on the side. Best investment ever
|
|
|
10-04-2016, 09:46 PM
|
#65
|
Senior Member
Join Date: Nov 2013
Location: Jeromesville, Ohio
Trailer: 2014 Escape 21' pulled with 2014 Silverado Crewcab
Posts: 854
|
Quote:
Originally Posted by rbryan4
Yeah Alan, I'm just pulling the WFCO converter and board and replacing it with the "boondocker" from bestconverter. It's a direct replacement and doesn't require replacing the WFCO housing. Not quite the 15.2 volts recommended peak charging voltage recommended by Interstate, but much better than the stock WFCO and a true 4 stage charger with a desulfation cycle. It also has a much better DC filter and users have reported it ends the flickering light issues common with the WFCO - although I can't speak to whether or not it means less noise/interference with a ham radio. If it can make the power more stable and extend my battery life, I figure it's worth the trouble.
Boondocker Converters
|
Which model Boondocker is the replacement?
__________________
Carl,
"Isn't it amazing how much stuff we get done the day before vacation?"
Zig Ziglar
|
|
|
10-04-2016, 10:02 PM
|
#66
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Quote:
Originally Posted by skiman
Which model Boondocker is the replacement?
|
This one. Direct replacement for the converter and board in the WFCO 8955, which is the stock Escape model:
http://www.bestconverter.com/BD-1255...l#.V_Rs4xllDqA
Sent from my SM-G930V using Tapatalk
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
10-09-2016, 06:10 PM
|
#67
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
so many mods, so little time
Saving one less item to take care of . Cut the handle off of blocks so they are square . Attached with stainless hardware . Always on pads . Lighted on and off switch for our backup camera . Switch is on in picture . Inside cabinet to protect camera supply line I unburied from vinyl and glue . Bought from same manufacturer, Voyager. Camera never had a problem and the supply line was the same .
|
|
|
10-09-2016, 10:46 PM
|
#68
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Just an FYI for those who are contemplating the cooktop upgrade: You'll most likely have to cut down the top drawer that slides underneath the cooktop, since it's plumbed with a flare fitting that goes out the bottom, and because it sits a little deeper in the countertop than the stock cooktop. I made the sides of the top drawer shorter at the back, and then added a new piece of MDF about 2/3 back for the drawer back. Didn't have to change the mounting rails at all, and it clears the fitting. Only thing is, you do lose some depth on that one drawer.
Also, another FYI: If you don't have a flare tool, DO NOT buy one from Home Depot. They won't flare a thing, because they come with a coating on the clamp hole grooves and they won't grip the copper. Total junk, and a total waste of time. Ace or Lowes has a Brasscraft flare tool, which is a proper one. Don't ask me how I know.
I could go on a long rant about the total junk sold at Home Depot that passes for tools, but that's another story.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
10-10-2016, 10:10 AM
|
#69
|
Senior Member
Join Date: Feb 2016
Location: Area 51, New Mexico
Trailer: pondering.....
Posts: 728
|
Quote:
Originally Posted by rbryan4
Just an FYI for those who are contemplating the cooktop upgrade: You'll most likely have to cut down the top drawer that slides underneath the cooktop, since it's plumbed with a flare fitting that goes out the bottom, and because it sits a little deeper in the countertop than the stock cooktop. I made the sides of the top drawer shorter at the back, and then added a new piece of MDF about 2/3 back for the drawer back. Didn't have to change the mounting rails at all, and it clears the fitting. Only thing is, you do lose some depth on that one drawer.
|
was going to ask about the depth when thinking about the mod...thanks for clearing that up...
|
|
|
10-10-2016, 06:59 PM
|
#70
|
Senior Member
Join Date: Nov 2012
Location: Little Rock, Arkansas
Trailer: 2014 Escape 19' and 2016 GMC Yukon SLT SUV.
Posts: 500
|
Quote:
Originally Posted by Patandlinda
Saving one less item to take care of . Cut the handle off of blocks so they are square . Attached with stainless hardware . Always on pads .
|
Hi Patandlinda,
I liked the yellow blocks. They looked nice. What yellow blocks did you used and where to purchase? Thanks
|
|
|
10-10-2016, 07:24 PM
|
#71
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
[QUOTE=Tonny LR;163677]
Quote:
Originally Posted by Patandlinda
Saving one less item to take care of . Cut the handle off of blocks so they are square . Attached with stainless hardware . Always on pads .
Hi Patandlinda,
I liked the yellow blocks. They looked nice. What yellow blocks did you used and where to purchase? Thanks
|
Hi Tonny . I had purchased from Camping World when on sale . I have seen them on Amazon too . They are 4 with a strap to keep them together . Price was 11-12 dollars . Thought a good idea so bottom of metal plates won't rust too bad . Pat
|
|
|
10-10-2016, 07:29 PM
|
#72
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
[QUOTE=Patandlinda;163682]
Quote:
Originally Posted by Tonny LR
Hi Tonny . I had purchased from Camping World when on sale . I have seen them on Amazon too . They are 4 with a strap to keep them together . Price was 11-12 dollars . Thought a good idea so bottom of metal plates won't rust too bad . Pat
|
Camco 44595 stabilizer jack pads 12.58 Amazon
|
|
|
10-10-2016, 07:36 PM
|
#73
|
Senior Member
Join Date: Nov 2012
Location: Little Rock, Arkansas
Trailer: 2014 Escape 19' and 2016 GMC Yukon SLT SUV.
Posts: 500
|
Hi Pat,
Thanks for the quick reply. Are they Ramble blocks (8 1/2" x 8 1/2") ? or are they different kind of blocks which you cut to meet the size of the sand pads. If they are not levelling blocks, what is the product name? Thanks.
|
|
|
10-10-2016, 07:41 PM
|
#74
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
Quote:
Originally Posted by Tonny LR
Hi Pat,
Thanks for the quick reply. Are they Ramble blocks (8 1/2" x 8 1/2") ? or are they different kind of blocks which you cut to meet the size of the sand pads. If they are not levelling blocks, what is the product name? Thanks.
|
Hi Tonny there are Camco #44595 on Amazon called stabilizer jack pads for 12.58 . They are yellow . Sorry I don't know how to take that picture and put it here . When you go to Amazon ask for stabilizer jack pads . Let me know if this helps . Pat
|
|
|
10-10-2016, 07:43 PM
|
#75
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,051
|
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
10-10-2016, 07:45 PM
|
#76
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
Quote:
Originally Posted by Donna D.
|
Thankyou Donna ! How can I do this ? Pat
|
|
|
10-10-2016, 07:50 PM
|
#77
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,051
|
Quote:
Originally Posted by Patandlinda
Thankyou Donna ! How can I do this ? Pat
|
To put in a link, copy the URL from the page you want to reference, then Paste into a reply Ctrl + V if using a PC. I think it's Cmd V for a Mac.
OR... click this an paste into the URL box
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
10-10-2016, 08:05 PM
|
#78
|
Senior Member
Join Date: Nov 2012
Location: Little Rock, Arkansas
Trailer: 2014 Escape 19' and 2016 GMC Yukon SLT SUV.
Posts: 500
|
Hello Donna and Pat,
Thankyou very much for the info. I appreciated you both for helping.
|
|
|
10-10-2016, 09:03 PM
|
#79
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
Quote:
Originally Posted by Donna D.
To put in a link, copy the URL from the page you want to reference, then Paste into a reply Ctrl + V if using a PC. I think it's Cmd V for a Mac.
OR... click this an paste into the URL box
|
All Mac's Donna . I-pad and mini Mac . Got to give a try . Thankyou again . Pat
|
|
|
10-10-2016, 09:57 PM
|
#80
|
Senior Member
Join Date: Mar 2013
Location: Yellow Springs, Ohio
Trailer: 2013 Escape 19
Posts: 709
|
Back to Donna's photo....I ran deck screws through two sets of four pads (in lieu of the strap in the photo). It never made sense to me to mess around stacking one, two, three, or four of these, since they're only a little over 1/2" thick each, and the screw jacks are infinitely adjustable. I usually put a four-stack under each rear jack on our 19, since the rear jacks start out a little higher. They're easier to pack up that way as well.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|