Drawer Space

[Playdog]

Does anyone know the dimensions of the interior of the two drawers between the sink and range on the 21? Are they the same size if one gets the oven?

[stephen99]

Originally Posted by Playdog

Does anyone know the dimensions of the interior of the two drawers between the sink and range on the 21? Are they the same size if one gets the oven?

This from Laura (NW Cat Owner):
Last one is the drawers and here's a very important measurement: both of 'em measure 9.25 from end to end (outside measurement) and 8.5" inside. So, if you want to put in a cutlery drawer insert, you now know exactly how wide it needs to be if you want to hang it off the lip or put it inside the drawer. They measure 17" deep.

I would not think the oven would change these dimensions.

[Playdog]

Thank you Stephen, that is exactly what I had in mind.

[stephen99]

Originally Posted by Playdog

Thank you Stephen, that is exactly what I had in mind.

If you are thinking about a cutlery tray this is the one that I was told would fit:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I don't have my trailer yet so can't verify but the wise folks here say it fits perfectly.

[NW Cat Owner]

If you need more measurements on the 21', I recently added a ton of photos and information on a thread about the 2nd Gen 21' trailer, including lots of measurements. I think I started off on page 3 or 4 of that thread.

Thanks Stephen99 for posting the measurements that I included in that thread.

Here's the link to that thread:

http://www.escapeforum.org/forums/f4...iler-8286.html

[Playdog]

Thanks Laura. We are getting the classic 21 so I don't think all the measurements are the same. I do enjoy checking out the photos you have posted.

[Steve Clark]

Originally Posted by Playdog

Thanks Laura. We are getting the classic 21 so I don't think all the measurements are the same. I do enjoy checking out the photos you have posted.

Stephen, The drawer measurements for the 21 classic are the same as Laura mentions for the new 2017 21. It's a firm 8 1/2" inside width. I found the Rubbermaid tray would need to be trimmed to fit inside the drawer, or if left untrimmed, it could be suspended across the sides, as many have done.