Despite every conceivable search, I can't find the info re: the diameter of the jack tube. I presume it's 2 inches, but I thought I would ask, just in case.
I suspect most of you know this off of the top of your head. I don't.
KSitte
__________________
2018 Escape 19: Last Best Escape 2015 Escape 19 (previous): Escape Goats
2011 Escape 17 (previous): SittEscape
Honda Pilot 2019
If the reason for asking is a plan to add some sort of wheel or foot to the jack, I'll note that as recently discussed not all 2" diameter jack legs are the same - the Escape jack is likely an Atwood set up for twist-lock accessories, not one using the common pin-through-hole design.
Trailer: 2014 Escape 21 -- The Skylark. Towed by a 2014 Highlander
Posts: 1,159
Quote:
Originally Posted by Brian B-P
If the reason for asking is a plan to add some sort of wheel or foot to the jack, I'll note that as recently discussed not all 2" diameter jack legs are the same - the Escape jack is likely an Atwood set up for twist-lock accessories, not one using the common pin-through-hole design.
The infamous hitch wheel that I discuss elsewhere uses a pin through the bottom of the jack tube. That was acquired with our 17b in 2012". The hitch jack on the skylark came with a flat plate, also attached via a pin through a hole in the bottom of the jack
Linear Mode
