Re: Saw David's 19'
Thanks Cathy for the kind coompliments. On the window size issue, we determined it was too high by sitting on the seat cushion then adding the two back cushions. The view is considerably improved. I solved the wobbly table issue, and ours dipped by as much as a quarter Inch, by making a board 1" thick by 1 and 1/2wide and 2" less than the width of the table. Tried 3 different approaches, double faced tape, Gorilla Glue, then an all purpose glue. All failed. Finally drilled two 10/32" holes 5" in from the ends of the support board thru the outside of the camper and inserted 1and 1/2 " stainless steel bolts from the outside. Then calked the head of the bolts. Table no longer wobbles.