12V outlets swapped for 12V with USB

[cpaharley2008]

Here is a close up

[Rrgramps]

Originally Posted by rubicon327

You may have seen this. They have them with USB’s too.
http://www.escapeforum.org/forums/f8...cle-10716.html

Yep. I’d seen it and made post #4 on November 19. I want to do something similar.

[rubicon327]

Originally Posted by cpaharley2008

Yes, I believe in the picture you can unscrew the front off the socket and remove from the faceplate and install another socket in the faceplate. I have taken them apart, it is comprised of 3 pieces, the faceplate, a holding ring and the socket itself.

Yes, I just took one apart myself. I see where you are going. The trouble is the existing socket is narrow and the opening diameter in the faceplate is only about 7/8”. The double USB socket replacement you showed earlier (post #12) needs a cutout size of 1.0625” based on online specs. Others as John mentioned need 1.125”. They will not fit the hole.

[Rrgramps]

I know most of you have used these before, in various styles, shapes, and configurations; but here they are again.
https://www.amazon.com/Charger-Cigar.../dp/B07HBRSTCY