21' electric jack

[float5]

Originally Posted by Patandlinda

Just got a message from Cathy . On the 21 with foam can someone help ?She is having trouble finding the little black box . She also is having trouble getting on the forum to ask . Can someone help maybe pictures ? This is on a Classic 21 .Pat

Thank you so much for asking, Pat!

[float5]

Originally Posted by Greg A

On my 17 and 19 if I recall the junction box Robert is referring to is inside the trailer in the drivers side bench. But I’m not sure on a 21.

Yes, inside on ours but they thought it was because of the foam. Maybe not.

[Steve Clark]

Originally Posted by float5

Yes, inside on ours but they thought it was because of the foam. Maybe not.

Interesting! We have foam on our 2016 -21’ and found the box exactly where Robert describes (D/S tongue, 3’ back from hitch). Glad they found it inside, Cathy

[float5]

Here's the jack.

[float5]

Originally Posted by Steve Clark

Interesting! We have foam on our 2016 -21’ and found the box exactly where Robert describes (D/S tongue, 3’ back from hitch). Glad they found it inside, Cathy

Hmmm. You do have foam and ours is older. They do move many things and no telling why.

[float5]

I said that the threads were ground up on the original jack. I meant the gears. Thought Brian was going to get after me before I could fix that! At least, they called it the gears.

Level does not seem to work in the new one. Bubble is on outside circle when we are level according to our side level with back level a little off.

[rbryan4]

Originally Posted by float5

Here's the jack.

A Barker. Good choice. They've been around for a long time.

[float5]

Originally Posted by rbryan4

A Barker. Good choice. They've been around for a long time.

Yes. It is a Barker VIP. I had looked at reviews way back and it had good ones. Seems nice so far.

[Patandlinda]

Originally Posted by float5

Thank you so much for asking, Pat!

Glad to see your back . Got the pictures too l like your jack . Pat

[rubicon327]

Originally Posted by float5

Level does not seem to work in the new one. Bubble is on outside circle when we are level according to our side level with back level a little off.

Cathy,
It’s likely not broken. You need to level the trailer first and then adjust the three stainless steel screws to get the bubble in the middle circle. Then it should be right thereafter. See #5 under Initial Setup on page 1. I’ll bet the shop where you had this installed wouldn’t take the time to do this or maybe wouldn’t have even known.

http://www.barkermfg.com/uploads/5/4..._all_pages.pdf

P.S. Nice install. I like the nightlight feature.

[Patandlinda]

Originally Posted by Patandlinda

Glad to see your back . Got the pictures too l like your jack . Pat

Cathy what model is the jack? And where did you purchase ? Pat

[float5]

Originally Posted by rubicon327

Cathy,
It’s likely not broken. You need to level the trailer first and then adjust the three stainless steel screws to get the bubble in the middle circle. Then it should be right thereafter. See #5 under Initial Setup on page 1. I’ll bet the shop where you had this installed wouldn’t take the time to do this or maybe wouldn’t have even known.

http://www.barkermfg.com/uploads/5/4..._all_pages.pdf

P.S. Nice install. I like the nightlight feature.

Thank you! We told them we needed the box and directions and then forgot about it. Have to go back, I guess. I will look at what you posted.

Have now downloaded instructions. Thank you.

[float5]

Originally Posted by Patandlinda

Cathy what model is the jack? And where did you purchase ? Pat

It is a Barker VIP and cost us double what somebody might pay for another jack. Doubt it is worth it but nothing to compare. Of course, we were giving a bunch of money to the local RV shop so that is fine with me. I know that you could buy it much cheaper. I had seen such good reviews that that is the one I picked. I thought you had electric.

[Patandlinda]

Originally Posted by float5

It is a Barker VIP and cost us double what somebody might pay for another jack. Doubt it is worth it but nothing to compare. Of course, we were giving a bunch of money to the local RV shop so that is fine with me. I know that you could buy it much cheaper. I had seen such good reviews that that is the one I picked. I thought you had electric.

Do you know if it is 3500 or 4000. No still haven't gotten electric but I may . Pat

[Steve Clark]

Originally Posted by rubicon327

Cathy,
It’s likely not broken. You need to level the trailer first and then adjust the three stainless steel screws to get the bubble in the middle circle. Then it should be right thereafter. See #5 under Initial Setup on page 1. I’ll bet the shop where you had this installed wouldn’t take the time to do this or maybe wouldn’t have even known.

http://www.barkermfg.com/uploads/5/4..._all_pages.pdf

P.S. Nice install. I like the nightlight feature.

Thanks rubicon! I did not know that!

[float5]

Originally Posted by Patandlinda

Do you know if it is 3500 or 4000. No still haven't gotten electric but I may . Pat

Ours is 3000 I believe. Definitely not 4000. If no 3000, then 3500.

[rubicon327]

Originally Posted by float5

Ours is 3000 I believe. Definitely not 4000. If no 3000, then 3500.

Based on Cathy's picture it is the 3000.

[float5]

Originally Posted by rubicon327

Based on Cathy's picture it is the 3000.

Hehehe. 3000 on the photo. I might look at my own photo!

[Patandlinda]

Originally Posted by float5

Hehehe. 3000 on the photo. I might look at my own photo!

Thankyou Dave and Cathy . The kids keep telling me to get one . Maybe move up in the modern world . Pat

[Greg A]

That was the first elect jack I put on my Scamp years ago. You’ll love it and wonder why you didn’t do it sooner.