|
06-20-2019, 07:31 AM
|
#1
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
5.0TA escape hatch
Has anyone repainted the over the bed escape hatch? Mine's taken on a very ugly yellow. Wondering if it was removed to do so or painted in place somehow. Doesn't look easy either way.
__________________
Happy Motoring
Bob
|
|
|
06-20-2019, 07:40 AM
|
#2
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,550
|
I would likely just paint it in place. If you raise the landing gear up the loft drops a bit. I am considering doing that too some time, though could be a while as so much other stuff is more important at this time.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
06-20-2019, 08:50 AM
|
#3
|
Senior Member
Join Date: Jul 2016
Location: East Dover, Vermont
Trailer: 2014 Escape 5.0 TA!
Posts: 678
|
Quote:
Originally Posted by padlin
Has anyone repainted the over the bed escape hatch? Mine's taken on a very ugly yellow. Wondering if it was removed to do so or painted in place somehow. Doesn't look easy either way.
|
Yes I painted mine. I did not like the light coming in. I used Rustoleum Painter's Touch Ultracover paint and primer spray cans...it says it bonds to plastic. I used black first to block the light then covered that with white to avoid solar gain and an ugly look. I masked off the surrounding area with paper to protect from overspray...kind of...I did have to use some solvent to clean up afterwards and rewax. That was over a year ago and it still looks good, granted we are in New England where the sun is not so strong.
|
|
|
06-20-2019, 09:03 AM
|
#4
|
Senior Member
Join Date: Feb 2018
Location: Austin, Texas
Trailer: 2019 5.0TA "Junior", 2019 Ram 1500 5.7 Hemi
Posts: 1,600
|
I think ETI may have changed the escape hatch. Ours does not let any light in, seems like the older one we visited was more translucent and they had made a cover to block early morning light. Also the inside frame is welded metal painted white, I think older ones had a wood grain wood or plastic trim inside.
__________________
David, Mary, and the cats
|
|
|
06-20-2019, 09:04 AM
|
#5
|
Senior Member
Join Date: Aug 2013
Location: Naples, Florida
Trailer: New 21 Escape (not classic)10/16 Sold Lil Snoozy 7/16
Posts: 484
|
Max fan
A little off topic but similar our Maxfan on 3 yr E21 has cracked from high wind here in Illinois. I used JB weld to fix it so the rain wouldn’t come in now when I get home I might paint it to take the ugly grey out . We are not near a Camping world or similar RV place Can one replace just the top of the maxfan? Jim
|
|
|
06-20-2019, 09:05 AM
|
#6
|
Senior Member
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 8,038
|
Quote:
Originally Posted by padlin
Has anyone repainted the over the bed escape hatch? Mine's taken on a very ugly yellow. Wondering if it was removed to do so or painted in place somehow. Doesn't look easy either way.
|
Hi: padlin... Mine's the same, but I only see it for a short time, and think about a remedy!!! Some day I'll get a "Round tuit".
One 5.0TA Escape owner I know had a tree branch accelerate his thinking. Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
|
|
|
06-20-2019, 09:08 AM
|
#7
|
Senior Member
Join Date: Feb 2016
Location: Naugatuck, Connecticut
Trailer: 2017 50 TA, 2016 F150, 2.7 Ecoboost
Posts: 1,056
|
Quote:
Originally Posted by Ian and Sue
Yes I painted mine. I did not like the light coming in. I used Rustoleum Painter's Touch Ultracover paint and primer spray cans...it says it bonds to plastic. I used black first to block the light then covered that with white to avoid solar gain and an ugly look. I masked off the surrounding area with paper to protect from overspray...kind of...I did have to use some solvent to clean up afterwards and rewax. That was over a year ago and it still looks good, granted we are in New England where the sun is not so strong.
|
If you want to further cut down on the solar gain or heat lose try using this stuff. I attached to the underside with double sided tape. Really noticed a difference when lounging in bed on hot days 😎
|
|
|
06-20-2019, 09:11 AM
|
#8
|
Senior Member
Join Date: Jul 2016
Location: East Dover, Vermont
Trailer: 2014 Escape 5.0 TA!
Posts: 678
|
Quote:
Originally Posted by Chotch
If you want to further cut down on the solar gain or heat lose try using this stuff. I attached to the underside with double sided tape. Really noticed a difference when lounging in bed on hot days 😎
|
Good point! I have used that method for cold weather camping but not warm....hmmm
|
|
|
06-20-2019, 09:12 AM
|
#9
|
Senior Member
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 8,038
|
Quote:
Originally Posted by Chotch
If you want to further cut down on the solar gain or heat lose try using this stuff. I attached to the underside with double sided tape. Really noticed a difference when lounging in bed on hot days 😎
|
Hi: Chotch... Is that red button an "Ejection button"? Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
|
|
|
06-20-2019, 09:18 AM
|
#10
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,550
|
Quote:
Originally Posted by Chotch
If you want to further cut down on the solar gain or heat lose try using this stuff. I attached to the underside with double sided tape. Really noticed a difference when lounging in bed on hot days 😎
|
So Cliff, does this mean you are going for the tacky look?
Okay, I admit this insulating has been a tough of mine to do someday too. Not to bothered by the insulation factor physically as I just use the loft fan to move air around me, but would like to lessen the energy loss due to the large thin shell.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
06-20-2019, 09:47 AM
|
#11
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
Quote:
Originally Posted by jennykatz
A little off topic but similar our Maxfan on 3 yr E21 has cracked from high wind here in Illinois. I used JB weld to fix it so the rain wouldn’t come in now when I get home I might paint it to take the ugly grey out . We are not near a Camping world or similar RV place Can one replace just the top of the maxfan? Jim
|
Jenny, the lid comes with a lifetime warranty. I have one sitting on the bench awaiting install. If you can't do it yourself you'd have to hire out the actual install. You can get the replacement if you call Maxxfan, they need the numbers off the inside of the fan.
__________________
Happy Motoring
Bob
|
|
|
06-20-2019, 09:51 AM
|
#12
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
Quote:
Originally Posted by Jim Bennett
So Cliff, does this mean you are going for the tacky look?
Okay, I admit this insulating has been a tough of mine to do someday too. Not to bothered by the insulation factor physically as I just use the loft fan to move air around me, but would like to lessen the energy loss due to the large thin shell.
|
I just cut a square of the reflectix and stuff it in the hole when needed. I did make a magnetic stick on cover copying someones idea that works too.
__________________
Happy Motoring
Bob
|
|
|
06-20-2019, 11:12 AM
|
#13
|
Senior Member
Join Date: Jan 2015
Location: Sunapee, New Hampshire
Trailer: 5.0 TA - Sept. 2015, 2016 Silverado 2500 Duramax
Posts: 334
|
Two summers ago I also painted our escape hatch cover on our 5.0 TA, first with black & then with a matching color for the outside. Then painted a piece of Reflectix the outside color and placed it up there to discourage condensation. I removed the cover to paint it.
|
|
|
06-20-2019, 11:52 AM
|
#14
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
Quote:
Originally Posted by Charlie & Lucy
I removed the cover to paint it.
|
Just the lid or the whole assy?
__________________
Happy Motoring
Bob
|
|
|
06-20-2019, 12:45 PM
|
#15
|
Senior Member
Join Date: Feb 2016
Location: Naugatuck, Connecticut
Trailer: 2017 50 TA, 2016 F150, 2.7 Ecoboost
Posts: 1,056
|
Quote:
Originally Posted by Jim Bennett
So Cliff, does this mean you are going for the tacky look?
Okay, I admit this insulating has been a tough of mine to do someday too. Not to bothered by the insulation factor physically as I just use the loft fan to move air around me, but would like to lessen the energy loss due to the large thin shell.
|
Tacky and shiny 😂
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|