A few modifications to my 19 - Page 8

markvt · 11-11-2014, 09:27 AM

Quote:

Originally Posted by MyronL

Oh...I get it now. The wall to right of your propane line would be the wall on the left side of my new storage hole.

What are you using to hide the plywood paneling end grain exposed around new cut out?

Myron,
Sorry I missed you post last night about what I was useing to cover plywood paneling edges. At this point all I have done is to sand edges smooth and than I stained the edges and the pine wood with a light golden oak stain which matches the paneling color pretty good.
I like Jim suggestion on contacting ETI to see if we can get them to ship us some edging. My other thought is to make a trip to my local building material store and see if I can find something out of the paneling area to match ETI paneling color.
Myron if you do come up with a alternative source for edging please let me know and let like wise if come up with some I will pass it to you.
Mark

MyronL · 11-11-2014, 09:38 AM

That rally (Osoyoos in May) is on my radar, Jim. Shucks, for me a mere 1,483 miles.

Mark, I cut my opening using a sharp new utility knife and a hard edge but still got an edge I don't like so got to hide them. Paneling's plastic trim (modified as needed), may do it... will be checking out Lowes, etc to see what they got.

Brian B-P · 11-11-2014, 06:49 PM

Quote:

Originally Posted by cpaharley2008

All this extra storage space just means more "Stuff"

I'm on a diet to eliminate my "Stuff"

It can also mean the same stuff in more space, making the stuff easier to find and get at.

cpaharley2008 · 11-11-2014, 07:04 PM

One can also say you are creating more places to look for something that you can not remember where you put since you now have a lot more places to look !!!.

Ron in BC · 11-11-2014, 07:06 PM

Ah yes, but with all the extra space you can carry spares. So if you don't find the one you're looking for you can use the other.

Ron

cpaharley2008 · 11-11-2014, 07:06 PM

back to my 3 coffee machines...

**rbryan4** · 11-11-2014, 07:19 PM

**Donna D.** · 11-11-2014, 07:40 PM

Quote:

Originally Posted by cpaharley2008

back to my 3 coffee machines...

I don't see a problem with this, I have two... and I normally just drink Taster's Choice

cpaharley2008 · 11-12-2014, 05:55 AM

Quote:

Originally Posted by Donna D.

I don't see a problem with this, I have two... and I normally just drink Taster's Choice

I'd like to get my 21' down to around 4000# so I'm eliminating duplicates where they exist. Just a personal goal!!

escape artist · 11-12-2014, 07:10 AM

Quote:

Originally Posted by Donna D.

I don't see a problem with this, I have two... and I normally just drink Taster's Choice

Hi: Donna D... Tasters Choice!!!

That's Insanite Coffee. Alf
escape artist N.S. of Lake Erie

**rbryan4** · 11-12-2014, 09:30 AM

So y'all stopped the thread drift by moving the coffee discussion to another thread -- only to have it reappear here. Proof that Coffee knows know thread boundaries!

MyronL · 11-12-2014, 09:58 AM

I'm as good a sport as the next coffee drinker. But...could we limit this thread to high praise for my wonderful mods?

5 coats Deft on cedar. Found plastic panel trim yesterday I hope will work.

J Mac · 11-12-2014, 10:14 AM

Looks great MyronL but, here's the coffee maker we use,

Coleman - Camping Coffeemaker - Camping Coffeemaker

**rbryan4** · 11-12-2014, 10:27 AM

I tried Myron.... I tried.

Ron in BC · 11-12-2014, 10:43 AM

Quote:

Originally Posted by MyronL

I'm as good a sport as the next coffee drinker. But...could we limit this thread to high praise for my wonderful mods?

5 coats Deft on cedar. Found plastic panel trim yesterday I hope will work.

Tennessee Aromatic Cedar, one of my favourite woods, very nice. That wood would make a great tray for serving coffee.

Ron

MyronL · 11-12-2014, 10:45 AM

Gotta go now, just ran out of Melita #6's...

...Lowes, 8 ft, but only comes in white, so...

**rbryan4** · 11-12-2014, 10:54 AM

Y'all quit trying to take this thread off track. It's clear from the photo that its a door for his coffee cabinet....lol

jamman · 11-12-2014, 11:20 AM

Your door is too beautiful to be so low - you need to put it at eye level.

float5 · 11-12-2014, 02:17 PM

Quote:

Originally Posted by MyronL

I'm as good a sport as the next coffee drinker. But...could we limit this thread to high praise for my wonderful mods?

5 coats Deft on cedar. Found plastic panel trim yesterday I hope will work.

Wow, very beautiful door, Myron.

alanmalk · 11-12-2014, 03:26 PM

Quote:

Originally Posted by Ron in BC

Tennessee Aromatic Cedar, one of my favourite woods, very nice. That wood would make a great tray for serving coffee.

Ron

Perhaps the two threads could be combined if MyronL made the door from
Kentucky Coffeetree wood (Scientific Name: Gymnocladus spp.)?

--
Alan

11-12-2014, 09:30 AM	#151
rbryan4 Site Team Join Date: Jun 2014 Location: Canyon Lake, Texas Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB Posts: 10,222	So y'all stopped the thread drift by moving the coffee discussion to another thread -- only to have it reappear here. Proof that Coffee knows know thread boundaries! __________________ "You can't buy happiness, but you can buy an RV. And that is pretty close."

11-12-2014, 09:58 AM	#152
MyronL Senior Member Join Date: May 2013 Location: ..., New Mexico Trailer: 2013 Esc19/'14 Silvrado Posts: 4,193	I'm as good a sport as the next coffee drinker. But...could we limit this thread to high praise for my wonderful mods? 5 coats Deft on cedar. Found plastic panel trim yesterday I hope will work. Attached Thumbnails __________________ Myron "A billion here, a billion there...add it all up and before you know it you're talking real money." Everett Dirkson

11-12-2014, 10:27 AM	#154
rbryan4 Site Team Join Date: Jun 2014 Location: Canyon Lake, Texas Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB Posts: 10,222	I tried Myron.... I tried. __________________ "You can't buy happiness, but you can buy an RV. And that is pretty close."

11-12-2014, 10:45 AM	#156
MyronL Senior Member Join Date: May 2013 Location: ..., New Mexico Trailer: 2013 Esc19/'14 Silvrado Posts: 4,193	Gotta go now, just ran out of Melita #6's... ...Lowes, 8 ft, but only comes in white, so... Attached Thumbnails __________________ Myron "A billion here, a billion there...add it all up and before you know it you're talking real money." Everett Dirkson

11-12-2014, 10:54 AM	#157
rbryan4 Site Team Join Date: Jun 2014 Location: Canyon Lake, Texas Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB Posts: 10,222	Y'all quit trying to take this thread off track. It's clear from the photo that its a door for his coffee cabinet....lol __________________ "You can't buy happiness, but you can buy an RV. And that is pretty close."

11-12-2014, 10:14 AM	#153
J Mac Senior Member Join Date: Sep 2010 Location: Kelowna, British Columbia Trailer: 2008 Escape 17b Posts: 1,868	Looks great MyronL but, here's the coffee maker we use, Coleman - Camping Coffeemaker - Camping Coffeemaker

11-12-2014, 11:20 AM	#158
jamman Senior Member Join Date: Feb 2010 Location: Phoenix Metro Area, Arizona Trailer: 2014 Escape 19 Posts: 767	Your door is too beautiful to be so low - you need to put it at eye level.

You may also like: