In that case you might consider moving the smaller wire on your lower + terminal (3 in my photo), which I believe comes from your converter, easy to check, from the bottom + terminal to the + terminal located above the two 40 amp fuses. I think the way it's wired now wouldn't protect the converter from a reverse polarity situation.
Ron
Hi Ron,
i will have to dig into this, not sure what you mean with reversed polarity situation.
__________________
Escape 5.0 classic (ARRIVED in Holland)
TV - ISUZU D-Max
Favorite destination (Europe) - Tuscany
i will have to dig into this, not sure what you mean with reversed polarity situation.
Well, let's just say if you happened to do a little bit of wiring work and accidentally hooked up the DC with the leads reversed the 40 amp fuses would blow and your converter would be protected from damage.
i found my invoice for the LED strip so now i'm able to tell you which one we used.
I bought it over here in the Netherlands but it's a simple warm white LED strip which is waterproof. I'm sure you can get i somewhere closer to your neck of the woods.