|
|
08-09-2015, 08:57 AM
|
#21
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,532
|
After dealing with a few tangles with the power cord in my 19, and the royal pain it is to get at it to untangle, along with the fact that a couple of the "fingers" on the access hole bent, with on breaking off in cold weather, I got a kit from Tammy and changed it to a removable cord.
I had thought to build a compartment around it with thin plywood, which would lessen the chances of a tangle with other items, I worried that if it did tangle by itself, it would really be a hassle to get at to fix.
I now find it much easier to quickly coil the cord and stow it in my bin with other trailer setup items, than to "stuff" it into the original hole.
In the end, I am very glad I made the change, and for myself, would do it on another trailer if I got one.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
08-09-2015, 01:31 PM
|
#22
|
Junior Member
Join Date: Jun 2015
Location: Parker, Colorado
Trailer: 19' on order... should be ready in February!
Posts: 7
|
Hi,
We are working on a build sheet for a 19' trailer... This will be our first experience using a trailer. I'm confused by this conversation... Am I correct that a removable power cord would connect into the same space as a permanent cord but just have the ability to be stored in a different location when not in use? (Hopefully not in the campsite just vacated...? )
Thanks!
|
|
|
08-09-2015, 01:52 PM
|
#23
|
Senior Member
Join Date: Jul 2012
Location: O town, British Columbia
Trailer: 2014 Escape 21 "Lightning"
Posts: 1,467
|
In a word, yes.
Longer: the cord is actually 100% external to the trailer (the jack is built into the shell).
|
|
|
08-09-2015, 02:08 PM
|
#24
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by ljvinco
... Am I correct that a removable power cord would connect into the same space as a permanent cord but just have the ability to be stored in a different location when not in use?
|
The permanent cord is stuffed into a compartment under a seat or cabinet in the trailer (depending model), and the end pokes out through a little door in the trailer wall.
Yes, the removable cord plugs into a receptacle in the same place on the exterior of the trailer where the permanent cord would come out. You can store it where you want... even in the same place where the permanent cord would go, if you can get to that space easily enough from the inside. I think most people would rather store the removable cord where they don't have to carry it through the interior of the trailer, such as in the (optional) front storage box, or one of the compartments with an outside hatch.
Quote:
Originally Posted by ljvinco
Hopefully not in the campsite just vacated...?
|
That is a risk with the removable cord!
|
|
|
08-09-2015, 02:30 PM
|
#25
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
That's what a checklist is for:
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
08-09-2015, 02:35 PM
|
#26
|
Senior Member
Join Date: Sep 2013
Location: Ventura County, California
Trailer: 2013 19 Escape
Posts: 7,204
|
Doin'it my way
Quote:
Originally Posted by Patandlinda
Ron my cord was tangled too so when I got home added a1/4 piece of plywood to the frame underneath , few screws into frame . I left the front where the pump is open . Never had a problem since . Also just wipe the cord as I put it back . There is a little rubber plug goes around the cord to close up opening so I don't get uninvited friends in . Pat
|
pics of plywood confinement of cord .I also closed off outside box . Pat
|
|
|
08-09-2015, 02:43 PM
|
#27
|
Senior Member
Join Date: Dec 2014
Location: Medford, Oregon
Trailer: "Olaf" 2015 21'..... 2015 Tundra CrewMax
Posts: 109
|
Is the removable power cord a twist lock connection at the trailer?
|
|
|
08-09-2015, 02:45 PM
|
#28
|
Senior Member
Join Date: Apr 2014
Location: Gig Harbor, Washington
Trailer: Escape 21 'Toto'
Posts: 301
|
Yes, it's a twist-lock connection.
|
|
|
08-09-2015, 02:49 PM
|
#29
|
Senior Member
Join Date: Dec 2014
Location: Medford, Oregon
Trailer: "Olaf" 2015 21'..... 2015 Tundra CrewMax
Posts: 109
|
Quote:
Originally Posted by drpaddle
Yes, it's a twist-lock connection.
|
Thank you.
|
|
|
08-09-2015, 03:17 PM
|
#30
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by T&R
Is the removable power cord a twist lock connection at the trailer?
|
It is the very common twist-lock 30-amp 125V three-wire (hot, neutral, and ground) connector used outside of the RV world as well, but with a weather-resistant hood added for RV use. The standard is NEMA L5-30.
|
|
|
08-09-2015, 04:29 PM
|
#31
|
Senior Member
Join Date: May 2013
Location: Middle, Tennessee
Trailer: 2017 Escape 19' #2
Posts: 1,441
|
The removable cord keeps little furry 4 legged creatures from walking the cord and entering the camper. Ask me how I know.
I converted our Casita over to a twist lock removable cord after getting visitors entering through the standard cord down in Florida. Plus as mentioned the cord was always getting tangled up.
I would not be without the removable cord and just store the cord in the front box so there is no chance of forgetting it. I also carry a twist lock to standard 115 volt adaptor so I can use a regular extension cord if we are stopping somewhere quick and not needing to run the A/C or anything that draws a lot of amps.
Also don't leave you doors open when you done unloading when camping on the beach in Florida. Those little furry creatures will get in your car. Then they ride back home with you and after being parked for about a week without using using the van it was a shock when I opened the door. Luckily I just had to remove the radio to find it. Talk about a gross nasty job. Cheryl would not help with that one.
Awh the memories we make camping!!
__________________
Tom
|
|
|
08-09-2015, 04:55 PM
|
#32
|
Senior Member
Join Date: Sep 2014
Location: Ventura County, California
Trailer: 2015 Escape 17A
Posts: 2,344
|
|
|
|
08-09-2015, 06:39 PM
|
#33
|
Senior Member
Join Date: Oct 2012
Location: Highland Park, New Jersey
Trailer: Escape 19 February 2014
Posts: 975
|
I agonized over the option to get the removable cord -- most people advised to do it -- a few thought it was totally not necessary. But then I got to visit the factory, took one look at the standard cord and immediately decided that we'd get the detachable. So far it has not been forgotten. However, I still think that as far as keeping it clean is concerned, it would probably be easier with the one that retracts since I would guess that you only retract as much as you need without having to lay it on the ground. Am I correct?
|
|
|
08-09-2015, 06:57 PM
|
#34
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,023
|
Quote:
Originally Posted by Ruthe
However, I still think that as far as keeping it clean is concerned, it would probably be easier with the one that retracts since I would guess that you only retract as much as you need without having to lay it on the ground. Am I correct?
|
Don't know Ruthe. All I can say, is I only pull out what I need, no muddy cord for me! And nothing to forget when I de-camp. I've seen folks with the detachable cords where it's laying in inches of water and mud. A paper towel whipping down the cord while I'm feeding the cord back into it's hatch has worked for me. I think it's all good, just options and expectations.
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
08-09-2015, 07:36 PM
|
#35
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
And, you only need two hands. One holds the paper towel and one feeds it into the hole.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
08-09-2015, 07:58 PM
|
#36
|
Junior Member
Join Date: Jun 2015
Location: Parker, Colorado
Trailer: 19' on order... should be ready in February!
Posts: 7
|
Thank you all for your responses.... I understand it all much better now!
|
|
|
08-09-2015, 08:23 PM
|
#37
|
Senior Member
Join Date: Oct 2012
Location: Bellingham and Glacier, Washington
Trailer: 2013 Escape 15A
Posts: 2,051
|
Back to the original post #1: I assume the last picture is the bottom of the hold-down brackets for the solar panel, i.e., the inside ceiling of the trailer? Is that how ETI finishes off the bolts inside? If so, I may pass on that fix. And what are all those wires? What am I missing here?
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
'93 Ford 150 XLT or
'22 GMC Acadia Denali
|
|
|
08-09-2015, 09:01 PM
|
#38
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by KarenH
Back to the original post #1: I assume the last picture is the bottom of the hold-down brackets for the solar panel, i.e., the inside ceiling of the trailer?
...
And what are all those wires? What am I missing here?
|
That's inside a cabinet... so the wires are not normally seen, and are unrelated to the solar panel mounting.
|
|
|
08-09-2015, 09:12 PM
|
#39
|
Senior Member
Join Date: Oct 2012
Location: Bellingham and Glacier, Washington
Trailer: 2013 Escape 15A
Posts: 2,051
|
So the picture is turned sideways and the bolt coming through is on the ceiling inside the cabinets...at least on the 17B?
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
'93 Ford 150 XLT or
'22 GMC Acadia Denali
|
|
|
08-09-2015, 09:22 PM
|
#40
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by KarenH
So the picture is turned sideways and the bolt coming through is on the ceiling inside the cabinets...at least on the 17B?
|
Yes, the photo is rotated and the bolt is in the ceiling.
The locations of the bolts depends on the model, and which size and placement of panel is involved. In some cases it is out in the visible ceiling, but I believe they use a cover over the bolts in that case. Sorry, I don't have the details of which is which.
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|