Planned modifications to BlackJack….

[cpaharley2008]

Took some pictures today before the big freeze hits tonite. Installed some flip up coat hooks on bath/bed wall. Notice the piece of plastic sticking out of the round alarm, this has to be removed to activate the alarm.

[cpaharley2008]

Installed a chrome hook on bath door and 2 more by the front door, notice the insulation on the bath window to retain the heat.

[cpaharley2008]

Bath bamboo floor and extra grab handle in bath

[cpaharley2008]

Magazine rack on bath wall over bed and MaxxFan remote

[cpaharley2008]

Magazine rack on night stand wall and also moved one of the flip up table here from the dinette

[cpaharley2008]

Electric Heater installation under bed on wall facing bath, installed a 1000 watt "in wall" type bath heater, Broan model. Also installed a Woods 2/4/6/8 hour timer switch to control the heater. This was the reason I had an extra 120v outlet installed under the bed, a source for the heater.

[cpaharley2008]

Shoved a pice of foam in the exterior vent to keep cold air out, just have to remember to remove when towing.

[cpaharley2008]

Blurred image of the solar under the dinette, if someone wants a clearer picture, let me know.

[techfan]

Jim, in the coat hook pictures, what is the white unit on the ceiling to the left of the lights? Too small to be the A/C. I was just in Dave and Kathie's 21 in Portland and didn't see anything like that. Thanks. Tim

[cpaharley2008]

That is the "Jack" antenna

[FMLNM]

Originally Posted by cpaharley2008

Took some pictures today before the big freeze hits tonite. Installed some flip up coat hooks on bath/bed wall. Notice the piece of plastic sticking out of the round alarm, this has to be removed to activate the alarm.

Nice! where did you get those flip up coat hooks?

[cpaharley2008]

At a garage sale, never seen them anyplace.

[Vicki A.]

I like what you're doing Jim!
Now, can you be in south Texas in say, July?!

[Donna D.]

Originally Posted by cpaharley2008

That is the "Jack" antenna

Tim, remember D&K don't have a television in their 21' and I'm getting TWO for my 5er. Different strokes, for different folks.

[tash]

Hi Jim! What are the dimensions of the table in your u-shaped dinette? I haven't had any luck finding where they might have been posted....

Thanks so much!

[cpaharley2008]

Hang on, it is snowing right now but I may get a chance to go out and measure in awhile.

[Donna D.]

Originally Posted by cpaharley2008

Hang on, it is snowing right now but I may get a chance to go out and measure in awhile.

Thanks Jim. Can you measure the back and the front, please. Oh... and how "thick" is the table?

[cpaharley2008]

Okay, the table is 34" wide at the rear and 24" wide at the front with the 34" width going along the sides for 24" and then narrowing 5" into the 24" width. Overall 34"x29" Does this make sense. The thickness is standard countertop, maybe 3/4-1" thick.

[Donna D.]

Yeah, makes sense. Yours is opposite of a hinge table which is narrower at the rear. I can see why each table is made specifically for the individual trailer. Guess I'd better wait until I pick up my trailer before I start (re)building the table...

Thanks Jim!

[tash]

Originally Posted by cpaharley2008

Okay, the table is 34" wide at the rear and 24" wide at the front with the 34" width going along the sides for 24" and then narrowing 5" into the 24" width. Overall 34"x29" Does this make sense. The thickness is standard countertop, maybe 3/4-1" thick.

Thanks so much!

Doe it slide front to back or side to side?