|
|
07-08-2019, 05:02 PM
|
#1
|
Member
Join Date: Apr 2017
Location: Langley, British Columbia
Trailer: 2017 5.0TA SOLD
Posts: 57
|
Springfield Pedestal Question
I have a question for the people who have installed the Springfield Pedestal.
After installing the pedestal right out of the box, have you tightened the clamps on the tubes? I found the wobbliness could be reduced by snugging up the thumbscrews on the clamps. I'm just not sure how tight I can make them without breaking something.
Anybody else done this?
|
|
|
07-08-2019, 05:40 PM
|
#2
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
yes, I tightened mine up too, but I don't know to tell you by how much.
__________________
Happy Motoring
Bob
|
|
|
07-08-2019, 05:46 PM
|
#3
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,808
|
I'd be able to answer your question when I find the best place to order one.
I've looked at many sources and seen a wild variation in price. And being in Canada doesn't help. Where did you source yours?
Given use of similar items I'd think a gentle snug would be enough to firm it up and you'd have to use quite a bit more force to break them.
Given that ours might never be used in the lower position and one of the reasons that I'll be getting one is to have a solid table, I'm guessing mine will be snugged up firmly.
Ron
|
|
|
07-08-2019, 06:15 PM
|
#4
|
Member
Join Date: Apr 2017
Location: Langley, British Columbia
Trailer: 2017 5.0TA SOLD
Posts: 57
|
Hi Ron in BC
I got ours from Llebroc; ordered Mar 9 and arrived in Blaine, WA on the 18th. Cost was US$318 with free shipping.
|
|
|
07-08-2019, 06:57 PM
|
#5
|
Senior Member
Join Date: Sep 2013
Location: SLO County, California
Trailer: 2014 Escape 21C 2019 Expedition
Posts: 5,213
|
Oveetons price is $254 and am seeing a 25% off banner. Have any U.S. friends?
__________________
"We gotta get as far away as we can!"
- Russell Casse, Independence Day
|
|
|
07-08-2019, 08:27 PM
|
#6
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
Quote:
Originally Posted by Rossue
Oveetons price is $254 and am seeing a 25% off banner. Have any U.S. friends?
|
$254 clearance price and then add’l 30% off using “MARINE30” promo code. Will never beat that price....$178 before tax and shipping.
https://www.overtons.com/springfield...efault&start=2
|
|
|
07-08-2019, 09:25 PM
|
#7
|
Senior Member
Join Date: Oct 2018
Location: Front Range, Colorado
Trailer: ?
Posts: 739
|
Quote:
Originally Posted by rubicon327
|
Read the fine print.
The price of the table is $254.97. The extra 30% off does not apply to any item whose price ends in $0.97.
Plus shipping.
Still a good price. Just might order one.
|
|
|
07-08-2019, 09:52 PM
|
#8
|
Senior Member
Join Date: Sep 2013
Location: SLO County, California
Trailer: 2014 Escape 21C 2019 Expedition
Posts: 5,213
|
I would call them to order to see what discounts are available. That is where we bought ours and it was a good price as I remember.
__________________
"We gotta get as far away as we can!"
- Russell Casse, Independence Day
|
|
|
07-08-2019, 10:18 PM
|
#9
|
Senior Member
Join Date: May 2015
Location: Rangeley, Maine
Trailer: 2005 Escape 17B Sold 2016. 2016 Escape 19 Sold 2019. 2019 Escape 21 picked up Sep 2019
Posts: 173
|
I bought a Springfield table pedestal a couple weeks ago from Overton's... price was 254.97, discount was $63.74, total including $10.54 sales tax was $201.75.
When I went to the Overton website, I was asked if I wanted a "new customer" discount... or something like that (I can't remember the exact wording). I believe I was given a code to use. It was a 25% discount.
__________________
Dolly
These are the good old days!
|
|
|
07-08-2019, 11:20 PM
|
#10
|
Senior Member
Join Date: Sep 2016
Location: Bremerton, Washington
Trailer: 2019 5.0 TA
Posts: 1,141
|
To answer the original question, tighten the thumb screw to the point where the clamps seems difficult to close. Then back off one full turn on the thumb screw. The clamps should close with easy to moderate force and be firm, not overly tight.
(Test: if you can rotate the table top with the clamps closed, it is not quite tight enough.)
__________________
- Arnie & Paula & Kizzy the rat terrier
https://www.arniesea.com
- 2019 5.0 TA, 2017 Tundra Platinum.
- Bremerton, WA
|
|
|
07-08-2019, 11:40 PM
|
#11
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
Quote:
Originally Posted by EdColorado
Read the fine print.
The price of the table is $254.97. The extra 30% off does not apply to any item whose price ends in $0.97.
Plus shipping.
Still a good price. Just might order one.
|
Oops didn’t read the fine print. I just put it in my cart and applied the code. It worked but I didn’t take it all the way to checkout because we already have one.
|
|
|
07-09-2019, 08:29 AM
|
#12
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,547
|
I keep the latches tightened as much as possible yet still work them. This included a fairly took tightening when new and a couple tweaks since. It gives the table a great deal of stableness, almost eliminating any wobble.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
07-09-2019, 12:06 PM
|
#13
|
Member
Join Date: Oct 2018
Location: Ridgeway, South Carolina
Trailer: 2019 Escape 21/ 2017 Toyota Tundra 5.7 4x4
Posts: 41
|
Just picked one up for $196.14 including tax free shipping. The Marine30 promo code works.
|
|
|
07-09-2019, 12:17 PM
|
#14
|
Member
Join Date: Oct 2018
Location: Ridgeway, South Carolina
Trailer: 2019 Escape 21/ 2017 Toyota Tundra 5.7 4x4
Posts: 41
|
Correction on total price: $192.76 including tax and free shipping.
|
|
|
07-09-2019, 06:16 PM
|
#15
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,808
|
I just went to order one. Overton's doesn't have a photo and there are several finishes on the Springfield site.
I phoned Overton's and the customer service person made a real effort to find out what color it being sent out. He couldn't find out anything about the color, silver, black etc.
So what color is the unit from Overton's?
Ron
|
|
|
07-09-2019, 06:38 PM
|
#16
|
Senior Member
Join Date: Sep 2013
Location: SLO County, California
Trailer: 2014 Escape 21C 2019 Expedition
Posts: 5,213
|
The silver is what most have as the black is an upgrade. At that price does it matter
__________________
"We gotta get as far away as we can!"
- Russell Casse, Independence Day
|
|
|
07-09-2019, 06:46 PM
|
#17
|
Member
Join Date: Oct 2018
Location: Ridgeway, South Carolina
Trailer: 2019 Escape 21/ 2017 Toyota Tundra 5.7 4x4
Posts: 41
|
I believe you are correct about the finish.
At the reduced price the finish didn't really matter. I would be pleased with either.
|
|
|
07-09-2019, 10:49 PM
|
#18
|
Member
Join Date: Oct 2016
Location: Seattle, Washington
Trailer: 2018 Escape 21
Posts: 73
|
I just ordered one for our 21 for 196 including tax. Can anyone point me to the best install instructions available? It looks pretty easy, unscrew the current mounts and screw this in but I need to know screw lengths and will have to measure location so we can drop it to bed mode easily. Looking forward to a sturdier table and easier conversions for our son to sleep.
|
|
|
07-09-2019, 11:00 PM
|
#19
|
Senior Member
Join Date: Sep 2013
Location: SLO County, California
Trailer: 2014 Escape 21C 2019 Expedition
Posts: 5,213
|
Is your ETI slide front-rear or side-side? If front-rear you might want to cheat it slightly towards the front of the trailer. While I like the screws that came with the pedestal I added a raised floor so there was no worry about puncturing through the floor and possibly the fresh water tank. You should be cautious however with your factory raised floor.
__________________
"We gotta get as far away as we can!"
- Russell Casse, Independence Day
|
|
|
07-09-2019, 11:13 PM
|
#20
|
Member
Join Date: Oct 2016
Location: Seattle, Washington
Trailer: 2018 Escape 21
Posts: 73
|
Stock slide in our 21 is side to side, probably possible to add a 4-way but that would be more work for not a lot of benefit. When I pull up the press base mounts I can measure the screw protrusion or just reuse them.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|