A "classic" measurement, please.
I am away from home so am unable to measure in my own 5.0TA, but I want to order new pedestals for the dinette table, and keep the current height as close as possible. The replacement pedestals are branded as Sequoia, typically used in marine applications. They have twist lock bases and the tops use a screw mechanism so they are NOT friction fit like the ones supplied by ETI, and are more secure/less likely to loosen. The Sequoia tubes are available in 25, 27, and 29 inches. What I need is the measurement from the floor to the plywood square to which the upper pedestal "socket" is attached. While I suspect that the same pedestal length is used in the 17, 19, and 21 as in the 5.0, I am not sure if it is the same in the 2nd Gens due to the raised floor. So my request is addressed to all you "Classic" owners. I would appreciate multiple responses so I can obtain a consensus.
Thank you all!!
__________________
What a long strange trip it’s been!
|