command tape fails,

[titanizer]

I used one screw on the end ,aisle side, as there is solid wood there and VHB on the back. Worked well and is very solid.

[rubicon327]

Originally Posted by titanizer

I used one screw on the end ,aisle side, as there is solid wood there and VHB on the back. Worked well and is very solid.

That is the exact spot I wanted that unit, but unfortunately it doesn't fit there in a classic 19.

[thoer]

Originally Posted by rubicon327

That is the exact spot I wanted that unit, but unfortunately it doesn't fit there in a classic 19.

To put one there on our 17, I cut it down into a 3 hook. Thanks to Jon V, I knew there was a steel rod through them and he saved my radial arms saw’s expensive finish blade.

[rubicon327]

Originally Posted by thoer

To put one there on our 17, I cut it down into a 3 hook. Thanks to Jon V, I knew there was a steel rod through them and he saved my radial arms saw’s expensive finish blade.

Couldn't do that with the cubby design, but good to know I could cut down a standard Umbra hook set.