Frig. Door fell Off ? - Page 2 - Escape Trailer Owners Community

Go Back   Escape Trailer Owners Community > Escape Tech > Problem Solving | Owners helping each other
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 11-04-2015, 11:37 AM   #11
Senior Member
 
soultrek's Avatar
 
Join Date: Mar 2013
Location: New Meadows, Idaho
Trailer: 2008 Escape 17B
Posts: 184
Quote:
Originally Posted by soultrek View Post
First re the wobbly pin: I have the 3cu model 2354, which had that wobbly upper hinge issue. The hinge pin threads were worn down so that it could not be tightened in the hinge. I ended up ordering both the upper hinge pin and the hinge, being I was uncertain about the condition of the hinge threads. Wobbly problem solved - though it needs to be retightened periodically. Re door falling off: Mine hasn't opened inadvertently since I shimmed the thumb latch and secured the door with a bungy - and keeping the hinge pins tight helps.
Quote:
Originally Posted by techfan View Post
All of this, and following Reace's admonition to NEVER travel with anything in the door. So far, so good.
"All of this" has worked for me even with stuff in the door - SO FAR!
__________________

soultrek is offline   Reply With Quote
Old 11-05-2015, 12:20 AM   #12
Member
 
Join Date: Feb 2014
Location: Everett, Washington
Trailer: 17' Escape Floor B
Posts: 55
Had mine fall off when I hit a big bump. That cracked one of the trays but was able to put the door back on. I have the standard frig. Have had no problems since then!
__________________

__________________
"The CRO"
craigolsen is offline   Reply With Quote
Old 06-12-2016, 06:03 PM   #13
Senior Member
 
techfan's Avatar
 
Join Date: Oct 2012
Location: Longview, WA, Washington
Trailer: 2013 Escape 15B - 2014 Nissan Frontier SL
Posts: 858
Revived threadů Got concerned about reports from friends re their fridge door coming off. Decided on a strap, but wanted a cleaner look both when in use and not. I used two, metal (not plastic) hatch door clips and screwed them to the framed material on each side of the fridge. When closed, they give a clean appearance. I open them and drop a loop of the strapping material over each one, buckle them in the middle and cinch them tight. Easy to add, easy to take off and a very, almost unnoticeable look when closed. Pics below:
Attached Images
File Type: jpg IMG_4825.jpg (147.1 KB, 22 views)
File Type: jpg IMG_4826.jpg (258.1 KB, 26 views)
File Type: jpg IMG_4828.jpg (221.2 KB, 22 views)
File Type: jpg IMG_4829.jpg (277.6 KB, 22 views)
__________________
Tim and Julie
2013 Escape 15B
2014 Nissan Frontier, Previous 2012 Santa Fe
techfan is offline   Reply With Quote
Old 06-12-2016, 06:18 PM   #14
Senior Member
 
KarenH's Avatar
 
Join Date: Oct 2012
Location: Bellingham, Washington
Trailer: 2013 Escape 15A
Posts: 1,926
Send a message via Skype™ to KarenH
I, too, worried about the refer door after seeing earlier posts on it coming open during transit. While my solution is not as elegant as Tim's (not even close!), it serves the purpose; it is simply a bungee cord attached to a door handle and to the stove grate. It is extremely tight and the refer door won't budge with it in place. My trailer is in storage so I made do with a text addition to the pic to show the placement...
Attached Images
File Type: jpg Egbert Refer Door Strap.jpg (221.4 KB, 22 views)
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
Ford 150 XLT 5.8L
Bellingham, Washington
KarenH is offline   Reply With Quote
Old 06-12-2016, 10:03 PM   #15
Senior Member
 
Dave Walter's Avatar
 
Join Date: Apr 2012
Location: Edmonton, Alberta
Trailer: 2013 Escape 19 & 15B
Posts: 1,873
Quote:
Originally Posted by KarenH View Post
I, too, worried about the refer door after seeing earlier posts on it coming open during transit. While my solution is not as elegant as Tim's (not even close!), it serves the purpose; it is simply a bungee cord attached to a door handle and to the stove grate. It is extremely tight and the refer door won't budge with it in place. My trailer is in storage so I made do with a text addition to the pic to show the placement...
Karen, are you not concerned with the stove grate popping off when you hit a bump, and with the bungee tied to it? My whole oven top has popped loose a couple of times before I took measures to prevent it coming loose.
__________________
2013-19' & 2013-15B {avg is two 17's}, towed by 2011 Toyota FJ Cruiser

"It is better to remain silent at the risk of being thought a fool, than to talk and remove all doubt of it." - 1907, Maurice Switzer
Dave Walter is online now   Reply With Quote
Old 06-12-2016, 11:34 PM   #16
Senior Member
 
Devil Dog's Avatar
 
Join Date: Feb 2012
Location: Steveston B.C., British Columbia
Trailer: 2012- 17'B.... 2016 Tacoma SR5 TRD
Posts: 455
Our door came off for the second time . A jug of milk spilled onto the floor . That's when we noted that the cabinet walls are NOT sealed to the floor and anything spilt will go under the walls .Where everything will have to come out to make a proper clean up . This time it was the bottom pin that came loose .
Going to use a stronger Loctite and seal the walls to floor with clear silicone .
Attached Images
File Type: jpg IMG_2888.JPG (89.1 KB, 24 views)
File Type: jpg IMG_2889.JPG (120.4 KB, 24 views)
File Type: jpg IMG_2891.JPG (84.5 KB, 26 views)
File Type: jpg IMG_2890.JPG (68.1 KB, 28 views)
__________________
I've almost been everywhere man.
Almost been everywhere.....
Devil Dog is offline   Reply With Quote
Old 06-12-2016, 11:46 PM   #17
Senior Member
 
KarenH's Avatar
 
Join Date: Oct 2012
Location: Bellingham, Washington
Trailer: 2013 Escape 15A
Posts: 1,926
Send a message via Skype™ to KarenH
Quote:
Originally Posted by ice-breaker View Post
Karen, are you not concerned with the stove grate popping off when you hit a bump, and with the bungee tied to it? My whole oven top has popped loose a couple of times before I took measures to prevent it coming loose.
No, I am not. The tension of the bungee cord is so tight that a number of things would have to happen in order for this to fail as a secondary backup to the regular refer door latch. Namely, both refer door pins (or whatever is holding the fridge door on) would have to pop out (in which case I think the bungee cord would still be in place), the lower door handle would have to come loose, or the stove top would have to break free and it is screwed down to the counter top. That particular grate is in the stove top so tight that I have to work to get it out just to clean it and the tension from the bungee cord just adds to that--not even a rollover of the trailer would free that grate. But if all those things did fail, I would probably have much more to worry about than a refer door opening during transit.
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
Ford 150 XLT 5.8L
Bellingham, Washington
KarenH is offline   Reply With Quote
Old 06-12-2016, 11:52 PM   #18
Senior Member
 
KarenH's Avatar
 
Join Date: Oct 2012
Location: Bellingham, Washington
Trailer: 2013 Escape 15A
Posts: 1,926
Send a message via Skype™ to KarenH
Quote:
Originally Posted by Devil Dog View Post
This time it was the bottom pin that came loose...Going to use a stronger Loctite...
Wow. I can't tell from the pictures but did the pin break or did the door "bounce" off the pin somehow? And what will you do with the Loctite?
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
Ford 150 XLT 5.8L
Bellingham, Washington
KarenH is offline   Reply With Quote
Old 06-13-2016, 01:19 AM   #19
Senior Member
 
Devil Dog's Avatar
 
Join Date: Feb 2012
Location: Steveston B.C., British Columbia
Trailer: 2012- 17'B.... 2016 Tacoma SR5 TRD
Posts: 455
Yes the bottom pins screws up from the bottom, so If it un screws it falls out .
The pin brackets have 3 screws on the fridge wall face I Loctited them last year . Now the pins, they only have about 2-1/2 threads on them . That's the reason they come out so quickly . The next thing you know the door is off and there is a mess . We do have a strap holding the door closed but not meant to hold it on . But we will .
__________________
I've almost been everywhere man.
Almost been everywhere.....
Devil Dog is offline   Reply With Quote
Old 06-13-2016, 02:10 AM   #20
Senior Member
 
KarenH's Avatar
 
Join Date: Oct 2012
Location: Bellingham, Washington
Trailer: 2013 Escape 15A
Posts: 1,926
Send a message via Skype™ to KarenH
Quote:
Originally Posted by Devil Dog View Post
Yes the bottom pins screws up from the bottom, so If it un screws it falls out .

The pin brackets have 3 screws on the fridge wall face I Loctited them last year . Now the pins, they only have about 2-1/2 threads on them . That's the reason they come out so quickly . The next thing you know the door is off and there is a mess . We do have a strap holding the door closed but not meant to hold it on . But we will .
Okay, confusion reigns here...or maybe it just rains. Or maybe I should just rein it in. At any rate, how would using more Loctite help in this situation? One wouldn't use it on the pins, right?

I guess that checking the pins should be on one's routine maintenance list.
__________________

__________________
Karen Hulford
2013 Escape 15A, "Egbert"
Ford 150 XLT 5.8L
Bellingham, Washington
KarenH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






» Virginia Campgrounds

Reviews provided by



All times are GMT -5. The time now is 09:46 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.