Screen room

[Trees]

We didn't get Trees until the middle of October. I had put the screened room on the shelf thinking I would get to it later. Other projects seemed to take precedence. This week I pulled out the bag with the screened room expecting to find directions for assembly - there were none. With wind chills of -30 and 15 inches of snow, trial and error is not going to happen. Does anyone have directions, or is there perhaps a U-tube video? Maybe it it intuitive once parts are all laid out.

[cpaharley2008]

Instructions for screen room…………
Wait until Springtime before opening….

[gbaglo]

Here's from memory ( and I've only put it up a couple times ).

You take the strap off the awning after opening it ( it slides in the slot toward the rear ).
Spread out the screen room. At the front of it, at the top, is a cord that slips into the slot. Slide that cord, in the slot, from rear to front.
Put the spring loaded poles together and thread them through the fabric 'tunnels', with the pointy end facing away from the trailer. You will figure out where to put that pointy end. Compress the spring and push the blunt end of the poles up to where the awning mounting bracket is. You'll figure out where it goes ( as in it will be secure ).
You are done, after zipping up the door.

[Sandra L]

Thanks Glenn,
I think I will copy and paste your directions into "Word" and then print them out and put the paper into the bag.

[Trees]

Printed them & put with bag. When we get to FL, if get puzzled, we can call Tammy.
Thanks