|
03-06-2017, 03:26 PM
|
#1
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Table up or down while traveling?
Does it really matter whether the dinette table is up in table mode or down in bed mode while traveling? Up, there is a chance it could slide sideways if the locking knob vibrates lose. Down, it has some room to slide forward and back. Any suggestions on best position when traveling and best way to secure it there?
|
|
|
03-06-2017, 04:14 PM
|
#2
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,743
|
Quote:
Originally Posted by War Eagle
Up, there is a chance it could slide sideways if the locking knob vibrates lose.
|
I didn't like the threaded part digging into the table bottom etc. so I removed it. Alaska Hwy. and a couple of Baja trips later the table's still there. Does it move while we're underway. Really never thought about it, it can't go far.
Ron
|
|
|
03-06-2017, 05:05 PM
|
#3
|
Senior Member
Join Date: Aug 2015
Location: no fixed address, California
Trailer: 2017-21' Escape (sold) Casita 17' (sold)
Posts: 1,348
|
We have the Springfield pedistal, and have been advised by multiple people to have the dinette table in the DOWN position, for sure.
otherwise it might rip off the floor.
physics and all.
makes sense to me.
|
|
|
03-06-2017, 05:14 PM
|
#4
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
My buddy has the standard pedestals. He must have forgotten he was towing his trailer ( 19 ) when he took a corner coming out of the mall ( I was in passenger seat ). Found the table top askew on the seat cushion when we stopped.
If it had been in down position, that wouldn't have happened. But. it is a PIA with a double pedestal.
I generally leave my single pedestal table up in my 17B.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
03-06-2017, 05:15 PM
|
#5
|
Senior Member
Join Date: Oct 2012
Location: Bellingham and Glacier, Washington
Trailer: 2013 Escape 15A
Posts: 2,051
|
I have the standard set-up and put two nuts at the end of the thread (locking them together) to prevent the threaded part digging into the wood (as suggested by someone else on the forum years ago). I just tighten the locking knob; sometimes I forget but nothing horrible has ever happened. I just don't worry about it.
__________________
Karen Hulford
2013 Escape 15A, "Egbert"
'93 Ford 150 XLT or
'22 GMC Acadia Denali
|
|
|
03-06-2017, 05:28 PM
|
#6
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,532
|
Table up. Never even considered putting it down in any trailer we have owned. Too much of a pain in the butt for me.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
03-06-2017, 06:00 PM
|
#7
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
I had my table come off the pedestals once while traversing NJ roads. Did some minor damage to my first 19 Escape. My new 19 has a "D" ring underneath and 2X"D" rings on the dinette rails with a bungee strap now securing the table to the dinette, easily removable when stopped.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
03-06-2017, 06:20 PM
|
#8
|
Senior Member
Join Date: Nov 2015
Location: Baytown, Texas
Trailer: 2017 21' Escape - upgraded version
Posts: 2,697
|
I'm surprised to hear that the table will come loose when traveling. I seem to have the opposite problem - it takes a tremendous effort to get it loose. I wiggle, tug, bang, and after a while, I get the table off the pedestal poles.
I would be amazed to find that they come loose on their own.
Oh, I never take the table down while traveling.
__________________
Normal people believe that if it ain't broke, don't fix it.
Engineers believe in fixing it so that it never breaks.
|
|
|
03-06-2017, 06:28 PM
|
#9
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Certain roads have that harmonic distortion going on where the freeze bumps are equally spaced and your vehicle gets that up and down rhythm going....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
03-06-2017, 07:17 PM
|
#10
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
I never have an issue leaving my 21 table up. I did replace the funky chew-up-the-underside locking knob with a genuine pressure clamp (Destaco brand) on the rear side of the table. Restraining the table top from sliding side to side prevents the hammering that loosens up the pipes.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
03-06-2017, 07:48 PM
|
#11
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,125
|
Quote:
Originally Posted by cpaharley2008
I had my table come off the pedestals once while traversing NJ roads.
|
Not surprised. NJ has some bad ones although I have seen states with worse. PA comes to mind. I've taken a road to work for the last ten years that is essentially a quarter mile long patched pot hole. Finally saw a sign today indicating roadwork to begin next week! I hope that is the long overdue paving project.
|
|
|
03-06-2017, 10:01 PM
|
#12
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,743
|
Quote:
Originally Posted by cpaharley2008
I had my table come off the pedestals once while traversing NJ roads. D
|
New Jersey roads must be worse than Baja roads. No problem with my unlocked table.
The thing I don't like about the lock procedure is that it applies an upward force on the plastic slides. That can't be a good thing. Maybe one reason that I've never had any problem is that my custom table base is nutserted to the floor instead of screwed. Very strong.
Ron
|
|
|
03-06-2017, 11:55 PM
|
#13
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,125
|
Quote:
Originally Posted by Ron in BC
New Jersey roads must be worse than Baja roads. No problem with my unlocked table.
|
Actually they aren't that bad overall. Our DOT does a good job considering the abuse from pretty heavy traffic and weather.
|
|
|
03-07-2017, 08:41 AM
|
#14
|
Senior Member
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 8,035
|
Hi: All... Whether up or down our table has a desire to slide forward. I think it's from braking forces while towing. The standard issue tubes can be a PITA to get out and only wobble slightly so I'd rather leave them in. I looked into using the Sequoia table leg system but times two they're somewhat $pendy. Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|