Uncambered Back Axle in 5.0-TA

[KatrinaOstby]

Originally Posted by MikeS

Katrina what is your tow vehicle?

Just as a point of reference I know there are a few of us with late model F-150s towing the 5.0TA without the lift kit and using the lowest setting on the Andersen. If you have a similar size tow vehicle it would make sense to me that with the lift kit you would set the Andersen at a higher level. This also seems like a pretty easy possible solution.

Towing with a "normal" Ford F150, 4x2, 3.5L Ecoboost, MaxTrailer Tow Package.

[KatrinaOstby]

Originally Posted by Brian B-P

It's hard to see the detail, so I'm not sure, but it looks like the pin box is already in the lowered position; if so, I hope the ball isn't already in the top position.

The ball on the Andersen hitch was in the middle position. So, I've moved it to the highest position, raising the front of the trailer by just over an inch. Haven't had much chance to test it out yet. The pinbox on the Escape was in the Lowest position, so I won't be changing it.

[Brian B-P]

Originally Posted by KatrinaOstby

The ball on the Andersen hitch was in the middle position. So, I've moved it to the highest position, raising the front of the trailer by just over an inch. Haven't had much chance to test it out yet. The pinbox on the Escape was in the Lowest position, so I won't be changing it.

With any luck, that will be enough.