|
|
10-08-2015, 09:14 PM
|
#1
|
Senior Member
Join Date: Oct 2008
Location: Antelope, California
Trailer: 2009 17B "Suite Escape" pulled by a 2020 Toyota Sienna
Posts: 1,565
|
Aerospace 303 vs Poliglow
Does anyone know what the differences are between these two substances? Both are supposed to be very good for protecting fiberglass, and from what I understand, easy to apply and maintain. It is my understanding that Aerospace 303 is to be applied much more frequently than the once annual application of Poliglow, and that no removal of either is needed, but that the surface must be clean prior to any re-application.
Because of the ease of use, coupled with longevity and protection, I've been told that either is superior to carnuba wax.
First hand experience information is welcome.
__________________
Peace and Sunshine
|
|
|
10-08-2015, 09:43 PM
|
#2
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
3M makes dozens of cleaners and waxes for fiberglass. I think they know a thing or two about chemistry.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
10-08-2015, 09:59 PM
|
#3
|
Senior Member
Join Date: Mar 2013
Location: n/a, Texas
Trailer: Escape
Posts: 728
|
Based on experience of boaters I would not recommend poliglow, especially for new fiberglass. It can restore old or faded gelcoat, but it will yellow over time when exposed to sunlight and removal is a difficult chore.
Aerospace 303 is easy to apply and reapply, but doing the whole trailer 4 times a year or more is not worth it in my view.
My recommendation is to look at NuFinish sealant or a similar Maguiar's sealant.
|
|
|
10-08-2015, 10:04 PM
|
#4
|
Senior Member
Join Date: Jan 2009
Location: Pollock Pines, California
Trailer: 2009 Escape 19
Posts: 453
|
I've used 303 since our trailer was new in '09, once a year or so. Love the stuff. It's silicone based.
Bruce
|
|
|
10-08-2015, 10:09 PM
|
#5
|
Senior Member
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 5,136
|
Sandra, we do the 303 and will probably only do it once a year, maybe some of it twice, same as we did on our 19'. The information that I see as far as frequency probably pertains to upholstery and the like, not a whole trailer!
I also put it across the top of our closed awning. Someone's awning ripped off across the top and it was very brittle. I am interested in seeing if the 303 prevents that brittleness.
You cannot put 303 on wax. Have to do one or the other. You will not have a shiny waxy look with 303 as it is very different from wax. It is also supposed to be easier to put on than wax. We wash first, of course, and apply when dry. I spray it on the roof and use a long-handled mop with cotton washable cover to spread it where I can't reach.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
|
|
|
10-08-2015, 11:04 PM
|
#6
|
Senior Member
Join Date: Apr 2013
Location: Kamloops, British Columbia
Trailer: 2024 Bigfoot 21RB
Posts: 254
|
I used several 3M marine products on my fiberglass boats including their ultra performance marine paste wax and now use it on the trailer. It's a very durable high gloss wax which I try to put on twice a year. It takes a bit of work to apply and buff but great stuff.
|
|
|
10-09-2015, 06:48 AM
|
#7
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
I believe "303" is a newer version of "Armor All" we used back in the day. It was used on tires, dash boards, black trim and made everything shiny and new again. The "303" is supposed to help with sun protection. Poliglow or other waxes are better used on the fg body shell itself. I use "303" on the trim, a/c shroud, MaxxFann cover, vent covers.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
10-09-2015, 10:10 AM
|
#8
|
Senior Member
Join Date: Oct 2008
Location: Antelope, California
Trailer: 2009 17B "Suite Escape" pulled by a 2020 Toyota Sienna
Posts: 1,565
|
Thank you all for your help and information. I appreciate the assistance.
__________________
Peace and Sunshine
|
|
|
10-09-2015, 10:50 AM
|
#9
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Quote:
Originally Posted by Bruce Wray
I've used 303 since our trailer was new in '09, once a year or so. Love the stuff. It's silicone based.
Bruce
|
Actually, 303 contains no silicone. It's water based, and water soluble. Because of this, if you use 303 on your trailer, you should reapply it after washing. I use it on all my vehicles, and have done so for many years. More porous surfaces (like tires) may not have to be retreated after a car wash, but fiberglass isn't porous, and you remove most of the protective coating by washing.
Quote:
Originally Posted by cpaharley2008
I believe "303" is a newer version of "Armor All" we used back in the day.
|
The products have very few similarities. 303 has been around as long if not longer than Armor All. It has been used in aviation for a long time, and only recently became more popular in the automotive industry.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
10-09-2015, 11:34 AM
|
#11
|
Senior Member
Join Date: Oct 2008
Location: Antelope, California
Trailer: 2009 17B "Suite Escape" pulled by a 2020 Toyota Sienna
Posts: 1,565
|
Thanks for that information. My trailer is washed by my storage place after every use. So that wouldn't work.
__________________
Peace and Sunshine
|
|
|
10-09-2015, 11:35 AM
|
#12
|
Member
Join Date: Sep 2013
Location: western side, Montana
Trailer: 2014 escape 21
Posts: 82
|
Use a good marine fiberglass wax in spring and fall and call it good.
|
|
|
10-09-2015, 11:41 AM
|
#13
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Sandra,
Over on SOI we have extensive posts on trailer waxing and prep. Just look in the maintenance table of contents for the posts. I use 3M Marine restorer/wax if there is chalking, and then finish with Meguiars Premium RV/Marine wax. Awesome stuff and easy to do.
|
|
|
10-09-2015, 12:33 PM
|
#14
|
Senior Member
Join Date: Mar 2013
Location: n/a, Texas
Trailer: Escape
Posts: 728
|
Sandra,
The instructions on 303 say to reapply every 3-5 weeks for maximum protection.
|
|
|
10-09-2015, 12:40 PM
|
#15
|
Senior Member
Join Date: Oct 2008
Location: Antelope, California
Trailer: 2009 17B "Suite Escape" pulled by a 2020 Toyota Sienna
Posts: 1,565
|
Aerospace 303 vs Poliglow
Again, thanks for the input. Someone other than I will be doing the work, and I would not want to have something that would be laborious to remove, nor to be repeatedly applied on a short-term basis. And needless to add: good quality.
Of course as many, I want it all.
__________________
Peace and Sunshine
|
|
|
10-09-2015, 01:17 PM
|
#16
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
Quote:
Originally Posted by Greg A
Sandra,
Over on SOI we have extensive posts on trailer waxing and prep. Just look in the maintenance table of contents for the posts. I use 3M Marine restorer/wax if there is chalking, and then finish with Meguiars Premium RV/Marine wax. Awesome stuff and easy to do.
|
This is the method I'd follow too.
There are other products by 3M for heavy oxidation, but I doubt you'd need those.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
10-09-2015, 01:53 PM
|
#17
|
Senior Member
Join Date: Nov 2013
Location: Jeromesville, Ohio
Trailer: 2014 Escape 21' pulled with 2014 Silverado Crewcab
Posts: 854
|
BTS (Bow to Stern) is another alternative. Using that with good success. I will try 303 when I use up my gallon of BTS.
__________________
Carl,
"Isn't it amazing how much stuff we get done the day before vacation?"
Zig Ziglar
|
|
|
10-09-2015, 09:19 PM
|
#18
|
Senior Member
Join Date: Oct 2008
Location: Antelope, California
Trailer: 2009 17B "Suite Escape" pulled by a 2020 Toyota Sienna
Posts: 1,565
|
Thanks to all of you. Looks like I'm going to be doing a lot of reading.
__________________
Peace and Sunshine
|
|
|
10-09-2015, 09:24 PM
|
#19
|
Senior Member
Join Date: Oct 2009
Location: Galesville, Wisconsin
Trailer: 2017 21 "Blue II" & 2017 Highlander XLE (previously 2010 17B "Blue" & 2008 Tacoma)
Posts: 4,233
|
I first heard of Aerospace 303 when I bought a used and quite faded, oxidized Wenonah kevlar canoe. Wenonah recommends 303 for all their fiberglass and kevlar canoes. I haven't tried it on the fiberglass of our trailer as I had already applied a couple of coats of Nufinish before I read about 303. I use it on all the plastic parts though. It did a great job of helping to bring some color and shine back to the heavily oxidized canoe.
__________________
Eric (and Mary who is in no way responsible for anything stupid I post)
"Beware of false knowledge; it is more dangerous than ignorance." George Bernard Shaw
|
|
|
10-09-2015, 11:03 PM
|
#20
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Quote:
Originally Posted by skiman
BTS (Bow to Stern) is another alternative.
|
BTS is a good product, I agree.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|