Escape 19 build photos - week 3

[Richard Krueger]

Paperwork arrived yesterday - it's officially a 2014 Escape 19.

[ADKzookeeper]

Would you identify all the electrical components we are looking at in the last photo?

[jamman]

Originally Posted by ADKzookeeper

Would you identify all the electrical components we are looking at in the last photo?

Mine is a few days behind ...

Above the black tank
Top left (black/yellow)= 30amp transfer switch (inverter and mains)
To the right (gray) = box with 2 breakers - 2 circuits from transfer switch to 110V outlets
In front (partially visible) = I think this is the surge protector

On the floor (back right) = inverter - mine will be 1500W

In the bench wall
Switch far right - 12V disconnect
Big panel - standard power distribution center
2 Small panels - not sure which is which - display/control for the inverter and the surge protector.

[cpaharley2008]

Boy, that street side dinette is going to be the "hot" seat.

[ADKzookeeper]

Is the solar charger control box in there too?

[jamman]

Originally Posted by ADKzookeeper

Is the solar charger control box in there too?

I *think* (I'll know for sure January 8 the solar controller and monitor are in the overhead cabinet above the sink - just visible to the left of the overhead door in the last picture here:
http://www.escapeforum.org/forums/f1...more-3131.html

[Richard Krueger]

Originally Posted by cpaharley2008

Boy, that street side dinette is going to be the "hot" seat.

The driver side is the one with all the electrical stuff. I should probably try to lay claim to the passenger side first.

[Dave Walter]

Originally Posted by Richard Krueger

The driver side is the one with all the electrical stuff. I should probably try to lay claim to the passenger side first.

If you are winter camping, it may be nice to have the pre-warmed seat.

[jamman]

OK all you wise acres - the only things under the bench which should generate heat are the converter in the power distribution box and the inverter - and only one of them should be running at any given time.

[Brian B-P]

Originally Posted by jamman

... the only things under the bench which should generate heat are the converter in the power distribution box and the inverter - and only one of them should be running at any given time.

True... and if the converter is vented out of the front of the cabinet, that leaves only the inverter dumping heat into the seat box.

[Donna D.]

I love FRIDAYS! Cool beans... great pics!!!