|
|
04-12-2018, 05:53 PM
|
#1861
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Yes, both the spare tire and propane covers are left off and shipped inside the trailer.....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
04-12-2018, 05:54 PM
|
#1862
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Almost Done
Tomorrow will be final pics and then off to Quality Control.
|
|
|
04-12-2018, 06:18 PM
|
#1863
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Quote:
Originally Posted by cpaharley2008
Yes, both the spare tire and propane covers are left off and shipped inside the trailer.....
|
Yes, kind of. We had our 21' delivered. For what it's worth, when it arrived, the propane tank cover was inside the cabin, but the spare tire cover was already fitted onto the spare tire.
|
|
|
04-12-2018, 06:23 PM
|
#1864
|
Senior Member
Join Date: May 2014
Location: Miami, Florida
Trailer: 2018 Escape 19
Posts: 131
|
Kent, I got the same faucet...looks great!
|
|
|
04-12-2018, 07:11 PM
|
#1865
|
Senior Member
Join Date: Nov 2017
Location: Placerville, California
Trailer: 2018 Escape 17A double dinette
Posts: 1,520
|
It's so exciting!
__________________
--Time and trouble will tame an advanced young woman, but an advanced older woman is uncontrollable by any earthly force. --Dorothy Sayers
|
|
|
04-13-2018, 07:16 PM
|
#1866
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Final Photos
Final photos before quality control, I will drop off my aftermarket wheels/tires the day prior to my orientation to be installed along with my Crown 6 volt AGM batteries and the Anderson king pin adapter.
Yippee Skippy!
|
|
|
04-13-2018, 07:18 PM
|
#1867
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Final Photos
|
|
|
04-13-2018, 07:24 PM
|
#1868
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
In Case You Want to Know
Fabric =Sunbrella Milano Charcoal
Formica = Matte Black
Flooring = Armstrong Pemberton Grizzly Gray
Sink = Executive Zero Radius
Faucet = Ariel Flamingo
Shower Faucet = Dura-Faucet
|
|
|
04-13-2018, 07:30 PM
|
#1869
|
Senior Member
Join Date: Nov 2017
Location: Placerville, California
Trailer: 2018 Escape 17A double dinette
Posts: 1,520
|
What a great name for that faucet!!
Can you say something about the stove cover? Custom by ETI, or??
adding....what kind of table support will you have?
__________________
--Time and trouble will tame an advanced young woman, but an advanced older woman is uncontrollable by any earthly force. --Dorothy Sayers
|
|
|
04-13-2018, 07:53 PM
|
#1870
|
Senior Member
Join Date: Aug 2015
Location: Hudson, Ohio
Trailer: 2017 Escape 19 "Terrapin"
Posts: 428
|
Beautiful.
__________________
Things are more like they are now than they've ever been before.
-Ohio Ralph-
|
|
|
04-13-2018, 08:57 PM
|
#1871
|
Senior Member
Join Date: Nov 2017
Location: Placerville, California
Trailer: 2018 Escape 17A double dinette
Posts: 1,520
|
I saw in another thread that you'll have lagun table support. I'm eager to see what you think of it!
__________________
--Time and trouble will tame an advanced young woman, but an advanced older woman is uncontrollable by any earthly force. --Dorothy Sayers
|
|
|
04-13-2018, 09:17 PM
|
#1872
|
Senior Member
Join Date: Aug 2015
Location: Ponoka, Alberta
Trailer: 2016 19 classic "outta sight", jeep rubicon unlimited
Posts: 1,645
|
Wow, Kent. Beautiful!!!
Without the decals, the 5.0TA looks way bigger. And the inside: loving it!
__________________
"never lose hope, never lose faith"
|
|
|
04-13-2018, 09:45 PM
|
#1874
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Quote:
Originally Posted by h2owmn
Can you say something about the stove cover? Custom by ETI, or??
The stove top is the Dickenson 2 Burner Propane and the wood cutting board insertt comes with the range. Normal it sits in the cook top making for flush top. Not sure why it is sitting above like that.
adding....what kind of table support will you have?
|
Lagun Table mount discussed else where on this forum.
Quote:
Originally Posted by h2owmn
I saw in another thread that you'll have lagun table support. I'm eager to see what you think of it!
|
Many on this forum have already installed and seems to work well.
Quote:
Originally Posted by Marry
Wow, Kent. Beautiful!!!
Without the decals, the 5.0TA looks way bigger. And the inside: loving it!
|
Thank you all for the kind words! I have been eagerly waiting to see it all come together.
|
|
|
04-13-2018, 09:46 PM
|
#1875
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Lagun Table Mount Thread Link
|
|
|
04-13-2018, 10:37 PM
|
#1876
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
Quoting Kent: “The stove top is the Dickenson 2 Burner Propane and the wood cutting board insert comes with the range. Normal it sits in the cook top making for flush top. Not sure why it is sitting above like that.”
Kent: I have found that the cutting board doesn’t fit flush only if the cooking grate is not seated down properly. The grate has hooks that go around thick pins that are in the sides of the cooktop. It fits very, very tight so it is secure and there is no rattling around.
|
|
|
04-13-2018, 11:12 PM
|
#1877
|
Senior Member
Join Date: Nov 2017
Location: Placerville, California
Trailer: 2018 Escape 17A double dinette
Posts: 1,520
|
Ah, a,different stove. That top looks nice.
Thanks for the link. I think I've read every word in the forums on Lagun, likely more than once. I'm holding off til I live with my setup for awhile. If anybody is around at the rally stop by and you can chime in on the possibilities.
As the day gets closer its harder to wait!
__________________
--Time and trouble will tame an advanced young woman, but an advanced older woman is uncontrollable by any earthly force. --Dorothy Sayers
|
|
|
04-13-2018, 11:30 PM
|
#1878
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Quote:
Originally Posted by rubicon327
Kent: I have found that the cutting board doesn’t fit flush only if the cooking grate is not seated down properly. The grate has hooks that go around thick pins that are in the sides of the cooktop. It fits very, very tight so it is secure and there is no rattling around.
|
Thanks definitely know about the grate and locking it in place. I think one of the workers just set it on the counter top while Meagan was taking pictures.
Since ETI will only do a sink cover for their standard sink. I made a custom insert for my sink and Dickenson cook top. They are made of black King Starboard. The cook top insert sits flush as I tested it out before taking it and the sink to ETI late last year.
|
|
|
04-13-2018, 11:33 PM
|
#1879
|
Senior Member
Join Date: Aug 2016
Location: Bozeman, Montana
Trailer: 2018 5.0TA / 2018 GMC Canyon/Duramax
Posts: 561
|
Quote:
Originally Posted by h2owmn
Ah, a,different stove. That top looks nice.
Thanks for the link. I think I've read every word in the forums on Lagun, likely more than once. I'm holding off til I live with my setup for awhile. If anybody is around at the rally stop by and you can chime in on the possibilities.
As the day gets closer its harder to wait!
|
I will be at the rally, but unlikely I will have Lagun table mount installed by the rally as the rally is 1 week after I get back from picking up my 5.0TA.
|
|
|
04-14-2018, 08:10 AM
|
#1880
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
Quote:
Originally Posted by Kent
Since ETI will only do a sink cover for their standard sink. I made a custom insert for my sink and Dickenson cook top. They are made of black King Starboard. The cook top insert sits flush as I tested it out before taking it and the sink to ETI late last year.
|
I like those tops. Well done. Did you think about notching one corner so you can get a finger in to remove?
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|