|
10-09-2019, 06:13 AM
|
#1
|
Senior Member
Join Date: May 2019
Location: Sarita, Texas
Trailer: 2019 Escape 21
Posts: 518
|
Escape Curious
I should probably get registered with the ETI referral plan.
I went up to Somerville Lake (COE) TX. fishing for a few days and I didn't count but I would bet about a dozen folks stopped by with 'What is that'?
The four folks I showed the inside too were impressed with the obvious quality. I have made no mods at all, unless one counts replacing the battery switch, so they saw it just as it was delivered.
I've never tried to sell anything but I think I could do this.
__________________
Why have I never heard of a 'Physic' winning the lottery?
|
|
|
10-09-2019, 06:32 AM
|
#2
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
No need to register, just give the prospective owner an Escape card with your hand written name on it. Ask them to tell Escape they saw your unit. Then when they complete their purchase you will receive a $200 canadian check a couple of weeks later. I have probably sold close to 2 dozen Escapes here on the East coast. When I know I'm buying, I just ask Escape to hold my referrals and credit them to my build sheet.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
10-09-2019, 07:04 AM
|
#3
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
What did you replace your battery switch with?
|
|
|
10-09-2019, 07:48 AM
|
#4
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
you can let ETI know you are willing to show your trailer, they will give out your contact info to perspective buyers.
__________________
Happy Motoring
Bob
|
|
|
10-09-2019, 07:53 AM
|
#5
|
Senior Member
Join Date: May 2019
Location: Sarita, Texas
Trailer: 2019 Escape 21
Posts: 518
|
Quote:
Originally Posted by JStelly
What did you replace your battery switch with?
|
A rotary switch. I wouldn't have done it but the flip switch did not work. Dustin sent me a new one and after I put it on it broke on the second flip. Just flopped around.
Dustin told me to put one I liked on and send him the bill. That worked!
__________________
Why have I never heard of a 'Physic' winning the lottery?
|
|
|
10-09-2019, 07:56 AM
|
#6
|
Senior Member
Join Date: May 2019
Location: Sarita, Texas
Trailer: 2019 Escape 21
Posts: 518
|
Quote:
Originally Posted by padlin
you can let ETI know you are willing to show your trailer, they will give out your contact info to perspective buyers.
|
I don't think I want to do that. That would involve some planning and meeting..etc.
I don't do that anymore
__________________
Why have I never heard of a 'Physic' winning the lottery?
|
|
|
10-09-2019, 08:08 AM
|
#7
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by 75thRanger
A rotary switch. I wouldn't have done it but the flip switch did not work. Dustin sent me a new one and after I put it on it broke on the second flip. Just flopped around.
Dustin told me to put one I liked on and send him the bill. That worked!
|
That’s what my first one did also. Dustin sent me a replacement I put in last week. Although it works, it seems flimsy. I’ll see how long it lasts.
|
|
|
10-09-2019, 08:20 AM
|
#8
|
Senior Member
Join Date: May 2019
Location: Sarita, Texas
Trailer: 2019 Escape 21
Posts: 518
|
Quote:
Originally Posted by JStelly
That’s what my first one did also. Dustin sent me a replacement I put in last week. Although it works, it seems flimsy. I’ll see how long it lasts.
|
I noticed while under the seat that the heat pad switches are the same switch, or look the same.
I seldom replace anything unless it breaks but I'm thinking about those switches!
__________________
Why have I never heard of a 'Physic' winning the lottery?
|
|
|
10-09-2019, 08:37 AM
|
#9
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Just curious. Do you have a reference for the rotary switch you used?
|
|
|
10-09-2019, 08:47 AM
|
#10
|
Senior Member
Join Date: May 2019
Location: Sarita, Texas
Trailer: 2019 Escape 21
Posts: 518
|
Quote:
Originally Posted by JStelly
Just curious. Do you have a reference for the rotary switch you used?
|
I got it from a local farm implements dealer we use and I don't remember what brand it is. Next time I'm in the trailer, I'll look at it. Name is probably on it. It's quite a substantial switch.
__________________
Why have I never heard of a 'Physic' winning the lottery?
|
|
|
10-09-2019, 09:21 AM
|
#11
|
Senior Member
Join Date: Feb 2010
Location: Oswego, New York
Trailer: 2017 Escape 21C, 2018 Ford F150
Posts: 5,363
|
Quote:
Originally Posted by JStelly
Just curious. Do you have a reference for the rotary switch you used?
|
This is the one I used for both the battery disconnect & my inverter. It is obviously overkill for the battery, and yes, I need to fix the torn paper finish where I removed the old off/on label.
I added a 20 amp disconnect switch for the feed from my truck in the hole left by the old disconnect. While the lithium batteries have a full charge cutoff, if I'm driving long distances, I wanted to be able to shut the feed off.
|
|
|
10-09-2019, 09:55 AM
|
#12
|
Senior Member
Join Date: May 2013
Location: ..., New Mexico
Trailer: 2013 Esc19/'14 Silvrado
Posts: 4,193
|
I mixed some acrylic tube colors to match the oak paper.
__________________
Myron
"A billion here, a billion there...add it all up and before you know it you're talking real money." Everett Dirkson
|
|
|
10-09-2019, 12:29 PM
|
#13
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
brown magic marker will work
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
10-09-2019, 01:00 PM
|
#14
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by Vermilye
This is the one I used for both the battery disconnect & my inverter. It is obviously overkill for the battery, and yes, I need to fix the torn paper finish where I removed the old off/on label.
I added a 20 amp disconnect switch for the feed from my truck in the hole left by the old disconnect. While the lithium batteries have a full charge cutoff, if I'm driving long distances, I wanted to be able to shut the feed off.
|
Thanks Jon. This is helpful. I will keep it on my Amazon list (with many other items) just in case.
John
|
|
|
10-09-2019, 01:16 PM
|
#15
|
Senior Member
Join Date: Aug 2010
Location: Port Moody, British Columbia
Trailer: 2007 Escape 17B (sold); Currently 2013 19
Posts: 162
|
Escape will send you sticky tape that looks just like the oak paneling and it makes a very clean cover up. It's what they use for their butt joins.
|
|
|
10-09-2019, 02:18 PM
|
#16
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
Quote:
Originally Posted by lorrie
Escape will send you sticky tape that looks just like the oak paneling and it makes a very clean cover up. It's what they use for their butt joins.
|
I tried coloured crayons made to hide damage to furniture. Didn't work at all.
What works is the boo-boo tape, which I posted pix of last week. Here they are again.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|