Hi: all... Finally got to use the levelers. Boy are they slick. I cut 3/4" off so they fit and are easy to use. Every body knows I do easy well!!! Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
Alf, you might want to pass a saw across the bottoms of them and cut some grooves every 1/2" or so. I had issues with them slipping a couple times depending on the ground surface. They had a tendency to move forward as the tires tried to go up the ramp. With the grooves, no slip.
I really like them because there's no stacking, just drive till level.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 8,260
Andersons
Hi Alf
We're using the andersons again tonight. AZJack had cut one off, the other was full length. I put new Goodyear Endurance on the 21 and even the cut off one was too long, the sidewalks are taller on the new tires. So one of my very fine former park foremen used a bandsaw and freehanded the cutoff perfectly. Now they work great. If you change tires sometime. You might want to check the fit before going out again.
Dave
Alf, you might want to pass a saw across the bottoms of them and cut some grooves every 1/2" or so. I had issues with them slipping a couple times depending on the ground surface. They had a tendency to move forward as the tires tried to go up the ramp. With the grooves, no slip.
I really like them because there's no stacking, just drive till level.
This is what I purchased after reading all the other comments on the Anderson Levelers slipping.