My 2017 build sheet

[float5]

We also ordered a yard of the fabric we were going to use. A little sample can look so different. I made that mistake with upholstery fabric before. Couldn't recognize what I got!

[rbryan4]

Originally Posted by jennykatz

We found some nice fabric and some Formica that should go nicely ?How do we post that again ?

If you're asking how to upload pictures Jim, there are instructions in the Forum FAQ here:

Escape Trailer Owners Community - FAQ: Reading and Posting Messages

[jennykatz]

I don't think this will come out so good?

[jennykatz]

Formica 7014-58 Colorado Slate

Fabric Chevron print pattern Zagami Surf

Hopefully this will do well with the standard floor and cabinets

[jennykatz]

Hopefully a better picture of Formica? The fabric still looks greyish

The other photo is of Ray's 21 and what kind of fabric will they use mocha like the curtains or the fabric for the seats like my Chevron?

[rbryan4]

Originally Posted by jennykatz

Hopefully a better picture of Formica? The fabric still looks greyish

The other photo is of Ray's 21 and what kind of fabric will they use mocha like the curtains or the fabric for the seats like my Chevron?

I like geometric patterns Jim. My only caution (minor) would be that the whiter fabric might be harder to keep looking clean. Are you asking whether or not the valances should be done in the same fabric as the cushions? Most people go that way, unless you specify otherwise.

[SpokanEscape]

The fabric for the valances will be the same as your seat cushions.
The Colorado slate is the Formica we had in our 21' - a nice choice!

[Ginger]

Wouldnt the hand flush be easier to keep clean?

[cpaharley2008]

Originally Posted by Ginger

Wouldnt the hand flush be easier to keep clean?

That has always been my thinking.....

[padlin]

Originally Posted by Ginger

Wouldnt the hand flush be easier to keep clean?

Neither is a problem but having had both I guess you'd be correct.

[jennykatz]

What is hand flush Have to do with Fabric

[Ginger]

Posted in wrong spot. Still getting used to this forum. Should have been back a page or two. Sorry. Hope your build sheet goes well.

[Fox hunt]

Ha I thought I was missing something hand flush fabric easyer to clean...

[jennykatz]

I thought I was going Crazy hand flush Fabric?
When ETI does your seat covers can you remove them from the foam are they sewn in or zippered.
The fabric we have chosen is not sunbrella it's for outdoor furniture seems to be heavy enough . The white might get dirty but if zippered in could be dry cleaned or washed ? Jim

[padlin]

Originally Posted by jennykatz

I thought I was going Crazy hand flush Fabric?
When ETI does your seat covers can you remove them from the foam are they sewn in or zippered.
The fabric we have chosen is not sunbrella it's for outdoor furniture seems to be heavy enough . The white might get dirty but if zippered in could be dry cleaned or washed ? Jim

Yes you can remove the cushions. I tried changing to a heavier density foam, but it was too much so.

[jennykatz]

We have rethought our Fabric going with a med blue Sunbrella Sapphire and Colorodo Slate Formica. Something like Spokan escape person s 21 we now are rethinking front box I went to schools welding shop and getting an alum box made up we are real close to finishing our build sheet we will have it shipped to Goshen Indiana in Nov
Hopefully going out next week to ETI to bring fabric and finalize everything I've been told the new 21 should be done then Jim

[cpaharley2008]

Please do report back, there hasn't been a lot of activity lately here with new pictures, hopefully there hasn't been any glitches in production....

[SpokanEscape]

I think you will like the combination of that Formica and sapphire fabric!

[jennykatz]

I've been told that the microwave plug is there in the cabinet whether you get the microwave or not . Some questions
1- what size microwave and brand is the $110 option
2-I was thinking of putting in a larger inverter then 1500 watts so i could run microwave and hair dryer not at the same time
3- placement of battery does it have to be on passengers side on a 21 ?
4- I would also like to have an inverter plug where the microwave plug is
5-One way to get it is to order there inverter with all plugs working off inverter
6- How hard is it to run wires once you get this camper? I'm having ETI run 2 12 volt lines for LED lights over bed and over dinette .Maybe have them run a 110 volt line from back of microwave to battery location for future plug? I'm also having a wire run for a back up camera .I've not heard good things about the wireless backup cameras



the only time I could see this happening is stopping at a rest stop or when and if we boondock which could happen.

[tdf-texas]

Escape uses the RCA RMW712-BLACK (700 watt)

The measurements for the microwave openning are: 21” wide x 11 ½” high x 19” deep