5.0 U-shaped dinette cushion back measurements

[TahoeJoe]

Hello all, I recently converted the standard dinette in my 2017 5.0 to a U-shaped one with Lagun table mount, and now I'm on the last step which is making new cushions for it. I'm wondering if there are any 5.0 w/U-shape owners out there who could give me the measurements of the back cushions in theirs. I have my existing back cushions to work with and can measure the space, but the tricky part is that curved corner, and how the cushions will fit together there. Looking at the pics on the ETI website, it looks to me (of course I could be wrong) like the back cushions are not curved at all like the seats are. I suspect there's an ideal configuration such that the cushions will fit together nicely, and not be scrunched or fall down easily. Of course I've got some guesses...but thought I'd ask for some help here as well! Thanks in advance for any measurement assistance...

[WanderBred]

I'll type out the dimensions and stuff after the pictures.

[WanderBred]

The back cushion is 6' X 17" with 2" foam and 3/8" plywood, I attached it to plastic strips 1/2" X 2" on angle brackets to keep air flow behind it and now it stays in place when the cushion below is removed. Bottom cushion is curved on the ends and 82" X 18". The corner cushions are 17" X 15". and kind of gets wedged into the corner to keep everything from falling over.

[sofmerc]

Originally Posted by WanderBred

I'll type out the dimensions and stuff after the pictures.

is that Summit Ash ?

[WanderBred]

Originally Posted by sofmerc

is that Summit Ash ?

Good eye yes indeed

[TahoeJoe]

Thanks so much! Not sure I will go for that layout though...although I originally planned to get all new cushions, once I started to price them out I realized I should try to use the existing ones and add to them, to stay within my budget. That means I'd be working with my back cushions that go all the way to the back wall...(see pics in op)