Here is additional information and pictures of my Lagun table mount on the 21C with u-shaped dinette.
I cut the hatch door in half to allow easier access. Also, I would recommend having the back cushion divided into two cushions if you are ordering new. This costs extra, but would make getting into the hatches easier.
To mount the Lagun pedestal, I reinforced the back of the cabinet with 3/4" plywood. I cut a piece to entirely fill behind the thin veneer panel. I used construction adhesive to bond. I also added a larger cross piece to help stabilize the front panel.
I mounted the Lagun plate as shown and bolted through another piece of 1/2" plywood.
On the underside of the standard table, I screwed an aluminum plate to replace the formica ETI installed. I removed the slide stop screws and added wooden blocks to give me more travel.
The shorter cross piece is needed to reduce the swing radius of the top. A smaller table top would probably let the Lagun cross piece work.
__________________
Bob & Katie Brandenstein
On the road in our Escape 21
|