Dometic RM 2354 trouble

[hrewer]

We have a 2016 17B with the 3 cf fridge. We had a fire from a propane leak and have replaced the fridge. It works! But it is not seated correctly. There is a gap over a quarter of an inch on the bottom and the only flush part is the top left corner. The side screws worked themselves out on our last trip. Sorry my picture is turned.
Can anyone give advice on how to re-seat it ? Is there a spot where it screws into the floor?
Any pictures would be helpful.
Thanks!

[Centex]

Reference to text and diagrams on page 13 of the RM2354 installation manual here ...

https://documents.dometic.com/media/...0?templateId=0

... indicates that the fridge should be retained by 4 screws through the front frame and 1 screw at the rear base.

Hopefully with that information you can loosen and re-position the unit at the proper depth in the cabinet (and hopefully you can accomplish that without need to trim / enlarge the cabinet face opening).

Good Luck, Have Fun!