RM 2554 Not Turning On-Did I Fix It?

[sjnuss]

I want to put this out here in the forum as I was not able to find any posts relating specifically to my issue.

I went to start the frig today in preparation for a short outing next week and of course it would not come on in any mode. I putzed around checking all the fuses which appeared to be good, I had AC power at the outlet in the outside frig compartment and the 12V system was working OK. My online research then indicated it was possibly one of the 2 control boards. I then removed the "eyebrow" board (inside, this is the board that has the on/off. mode and temp buttons) and made sure all the connections were tight. I then manually hit the temp set button and the board lit up. Satisfied that I may have solved the issue I put everything back together and of course the board did not work. I then pulled the panel back out and slightly rearranged the grey power connector cord so it would not hit the back of the board and reassembled. I powered it back up and it worked just fine-even switched to AC when the power was restored. So I have no idea what actually solved the issue but I will see how things go after we go down the road a bit.

Steve

[padlin]

Wouldn't be the first time reseating a cable fixed a problem, time will tell.

[cpaharley2008]

I see both hands, who took the picture?

[Ron in BC]

What makes you think that both hands belong to the same body?

Hope the wiggle jiggle repair keeps working, wouldn't be the first time.

Ron

[sjnuss]

4 hands, 2 bodies-Had to have my wife help

Steve