Suberban SDS2 burner stove grommet source

[hondasaurus]

Hi to all,

I'm locking for information. My stove lost some of it's grommet.
I need the 2 kind. The one that support the rack burner assembly (#18 Grommet) and the one that cover the mounting screw and witch the glass door goes over (#17 kit, corner Mounting clip). I just need the grommet not the assembly.

I've try Email with Suberban but there no one home.

I'm from Canada and RV shop around here are scarcely away and dont hold that in stock.

Any other option or hack?

Thanks for helping out.

[Eggscape]

Number 17 is only a plug over the screw hole that the lid sits on so it can be replace with almost any stick on rubber foot available at a hardware or dollar store. So you don’t stress the glass if you get ones that are to big I would put the factory ones in the rear holes near the hinge and the two new ones up front.

As for the burner holders...they need to be somewhat heat resistant and are going to be a harder find.

[hondasaurus]

Originally Posted by Eggscape

Number 17 is only a plug over the screw hole that the lid sits on so it can be replace with almost any stick on rubber foot available at a hardware or dollar store. So you don’t stress the glass if you get ones that are to big I would put the factory ones in the rear holes near the hinge and the two new ones up front.

As for the burner holders...they need to be somewhat heat resistant and are going to be a harder find.

Good idea for # 17. Thanks Eggscape