|
12-06-2021, 05:14 PM
|
#1
|
Junior Member
Join Date: Jun 2015
Location: Campbell River, British Columbia
Trailer: 2016 19' Escape
Posts: 4
|
trailer cover
Does anyone know of a trailer cover that fits a Escape 19? We have an Adco trailer cover that is way to wide so the opening for the door doesn't line up very well.
Thanks, Wayne
|
|
|
12-06-2021, 05:53 PM
|
#2
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,807
|
I had an Adco on my 19 and now on my 21.
I don't have an A/C on the roof and the material hung right down to the ground and the top of the opening in the cover was lower than the top of the trailer door.
What I did to make the door easier to open with the trailer cover on was first pull the cover more over to the rear side until the door opening was at least as high as the trailer door. Then I took a light wood batten, about 1/4" x 1 1/2" and rolled up the back side surplus material until it was clear of the ground. I used plastic clothes line pins to hold the roll of material in place.
I also put a slab of white stryofoam on the roof over the door. It projects out about 6". It makes the door easier to open without having to roll the fabric up.
Works for me.
Ron
|
|
|
12-08-2021, 08:48 PM
|
#3
|
Junior Member
Join Date: Jun 2015
Location: Campbell River, British Columbia
Trailer: 2016 19' Escape
Posts: 4
|
Thanks Ron, I will have to give that a try. To bad there is isn't a company that make covers for
the smaller fiberglass trailers (Scamp, Cassita, Escape, etc) since there are quite a few out there.
Wayne
|
|
|
12-09-2021, 09:21 AM
|
#4
|
Senior Member
Join Date: Aug 2017
Location: NKY, Kentucky
Trailer: , Bigfoot 25B25RT, previously 2019 Escape 21, and Castia sd17
Posts: 201
|
Quote:
Originally Posted by Wayne&Nancy
Thanks Ron, I will have to give that a try. To bad there is isn't a company that make covers for
the smaller fiberglass trailers (Scamp, Cassita, Escape, etc) since there are quite a few out there.
Wayne
|
ADCO and Calmark both make custom sunbrella covers for small fiberglass rv's. On our previous Casita we had a Calmark and on our current Escape 21 we have a the custom ADCO. If you call Paulo Lopez from ADCO they will get you covered.
Here is a review of our ADCO cover. https://www.escapeforum.org/forums/f...a-17515-2.html
|
|
|
12-11-2021, 06:17 PM
|
#5
|
Junior Member
Join Date: Jun 2015
Location: Campbell River, British Columbia
Trailer: 2016 19' Escape
Posts: 4
|
Thanks for the information, we will make do with the old Adco cover for now. Wayne
|
|
|
12-16-2021, 12:28 AM
|
#6
|
Member
Join Date: May 2020
Location: EL DORADO HILLS, California
Trailer: 2022 Escape 19
Posts: 34
|
I just received my E19 and had ordered the cover from ETI but they were out of stock so refunded that charge. Here is what they use for their supplier. https://www.rvautoparts.com/80-409-1..._p_289043.html
|
|
|
12-20-2021, 10:39 PM
|
#7
|
Junior Member
Join Date: Jun 2015
Location: Campbell River, British Columbia
Trailer: 2016 19' Escape
Posts: 4
|
Thanks Doug, that is more what I was looking for. I will get a hold of them. Wayne
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|