Suggestion yes, good source for a decent replacement no.
I had to redo the lower portions of mine as they get totaled by the window frame, not a very precise fit.
I had some 1/2" x 1" neoprene stick on foam weather stripping with. I cut out the bad areas (both lower corners, cleaned off the residual glue, cut the weather stripping to sort of a laying down V with the small edge pointing towards the out side. The window closes up against it and gives me a better seal then I had before.
At the same time I used a small file and shaved don the aluminum around the glass in the corners so it would close correctly. Also drill drainage holes.
I'd take pictures but it's covered for another couple weeks.
__________________
Happy Motoring
Bob
|