Search results

Love it! I just wood blocks as a 2nd floor in an area in pickup bed. Pull out as many as I need. So will have make one of those up. ? length of level would matter, so what's yours?

Wow, only a month away. Have a huge pole of stuff yet?

Well, #1 I wouldn't trade a stable to increasing in value asset for a depreciating truck & trailer if it has the propensity to negatively impact your retirement/lifestyle; that's just me. Is very good point, if you are having to sell your house to finance full time travel. Especially...

I'd agree, with what I see at the Pink Elephant Rally I've gone too. There was even a Tacoma pulling a 5.0 there. Which was eye opening, as I pull a E19 with a Taco.

Love it. I use my "eye" first. I happened to inherent an "Artist Eye", from my Mother. Then the ETI bubble levels, to confirm what I see as done. Mine seem fine so far. As long as the Frig is happy. I have too many dogs in the floor to feel out of level.

I just insured mine for pickup. Then didn't register it for a while, was working on. But, ALL my mail has been going through P.O. Boxes for 30 yrs. 1st snowplows, then traveling. But I did/do have a physical address. Use a friend's for where you think you'll end up? My parents were in the...

3M double side is pretty good. BUT, to keep from doing it again, looks like you could try making tapered wedge pieces of foam(I haven't a clue on what would UV rated?), to have a "compression fit" to the fiberglass's curve. As you say the heated metal above................ I'll have to go up &...

I drove Horse Trailer for years ALL have bulldog couplers. I didn't change it on my 2013, as I planned on ordering a new one. But, I did change out to a Bull dog type on my 2023 E19. There is a LOT more ease with using one. Don't have to be aiming for the front of the coupler hooking or...

Helps to take it off for this "whacking/smacking"! Doesn't take much to crack fiberglass(a miss!?). I've got stress cracks in my fiberglass roof from ETI forcing Frig Vent roof in. Due to get fixed the finally in a few weeks(LONG waits at RV places here). but, yes better control with a...

Long, as you are asking a lot. I have that problem catching the threads, as it does also matters how you "leave it"(the inside piece(the fat rod?) that the pin for the "wing" goes through, is what matters with hooking back up, and you can NOT move it straight), & I have a driveway that...

If I wanted to access 12 volt power back there (thinking on putting a radio/CD player. I was thinking of looking to the captains lights for power. There is about 3/4" space between the underside & the inside bottom, ETI run wires through. "Play" with those, instead of outside lighting?

I looked at it. Has to still use & have the inside underneath collar, which IS the problem on slopes. I was in a front end accident with my horse trailer(sleeve coupler) & 2 horses(guy passing 2 bikes IN my lane!). I kept the rig straight. The 1/2" steel the ball sits on was...

I wondering about fogging, like vehicle headlights.

I had cracked hoses from day one. Said they'd ship new ones. But I figured I'd get the same ones/stock. So any I get from them is just going to do the same. I ordered some stainless steel ones from amazon. Someone from here I think bought longer ones & had a photo of putting on with no...

I'm working with ETI for cracks I found after a month or so, 2' long on my new E19, when I went up to put a dab(about 1/16" high) of caulk at the bath vent. I had found it leaked. Climbed to see what looked like some type of weep hole set just too low for our 2 1/2" an hour rains here, & a not...

For new trailer owners. The coupler ETI put's on is like most trailers, except Horse Trailers(which use the Bulldog sleeve type). I had horse trailers for 35+ yrs. Never a problem hooking or unhooking. So I switched my E19's to a Bulldog. My driveway slopes in ALL distractions! ETI's type have...

Yes, TSC is also where I get my dog food. So convenient for me.

A hair bigger screws backed up with good double sided tape under.

That 1/8" paneling is so thin & made mostly of Luann(a soft wood). I found doing a starter hole & putting a utility knife & hitting the top with a hammer, works just fine, for cutting. Takes some time, but have much more control. It's how I cut all my holes. And yes, ETI changed how the cabinet...

I have only filled a tank once. I did it at Tractor Supply. They seem to be allover.

I'll be heading out(& North) tomorrow(dark green E19). Went to Fiesta today, WILD!

I'm in a small town North of Albuquerque, NM. Not on 25 very much? But, all in a 3 block area. 1st I see a new 21C going south on a flat bed. 2 days ago, a 17 going south. Today a second 17 going south......... South is The Albuquerque Balloon Fiesta.

Yes, Thanks, I saw/found that maps like over 2 years ago. I now have 2 E19s, added to the one(which I see parked in storage, every time I when to the food store), Tiny town.

Yesterday, watched a brand new looked like a 21C, on a flatbed cross in front of me. No graphics at all. As I was first waiting at a light in Bernaillo, NM. Heading south to Albuquerque.

Yes, Thanks to all who made it work. And wondered about the Escape count! Got some ideas, etc. I had my Brother in Prairie take me to Pike's Peak. It is ready, but I don't think it would hold us all? Gravel pads, not cement, Didn't see some place like the Stone Hut to meet at? No...