starlink

Shown is our latest method to get Starlink Mini above our E19’s roof. Mast is 2” OD, 1/8” wall, 2 ft long Penninger aluminum Snap Tube sections with flanged joiner between mast sections. The base mount is a 2” flag pole hitch receiver mount. As shown with five mast sections, the Mini antenna’s...

Has anybody wired a starlink thru a winegard opening in the roof?

We have searched for a way to run our Mini system from DC on our E19. Powering Mini directly with 12 VDC is an issue, as addressed on this and other forums. The Starlink provided 120VAC power adapter works, but it requires turning on our E19’s inverter. We’ve found two approaches that work off...

We have a Jayflight 334RTS (2023). We are thinking about running a Starlink connection through one of the coax TV connectors. We will have to pull one of them off the side of the trailer to modify it. How hard is it going to be to put it back on so it won’t leak? Any advice is appreciated.

In a few days, we will be heading out on a month-long journey and will test the Travlfi XTR ($299 with coupon and cigarette plug adaptor). I reviewed many systems, and the XTR 4G (25G subscription) seems to be the best answer for both of us to work from the road - along with a Verizon hot-spot...

I've seen posts regarding mounting a StarLink gen 2 to a Grand Design ladder but wanted to find the best ladder mounting system for the StarLink gen 3 to a 2023 Grand Design Imagine 2910BH. I'm not as concerned about price as I am fit, stability, durability, etc. Any thoughts? Thank you! Ron

I just wanted to share my I stall of my Starlink hardware in my 2023 Imagine 3210BH. Using A mount for the router and the power brick I ordered off of Etsy. I’m mounted it to the plywood underneath in the pass-through and using 3M cord clips ran the power cord to the receptacle that is In our...

We are considering adding Starlink in our 21 (2015 model with U shape dinette)but have questions which we can’t seem to find answers to. Anyone with advice or experience please chime in! We want to keep the set up simple and we are not electrically handy! (Basically, I need a Starlink for...

I installed a 2000w Renogy inverter today on our '23 E19 to power Starlink, and I ran a port to mount Starlink under the dinette. However, after examining the wiring and digging through the forums, I am still unclear on whether or not I can (and should) ground the inverter to the bus above the...

Just wanted to check if anyone has had success with the Gen 3 Starlink yet. I am going to permanently install it on my 2024 LV35 and if there are any tips or tricks out there I could use!

We are using a StarLink Roam subscription, and we wanted a good way to bring the antenna-to-router cable inside our E19-F1. There was a similar discussion a year ago with other ideas. The StarLink v2 WiFi router uses a shielded Ethernet cable with proprietary connectors on each end. For the...

Getting ready to order Starlink for my RLS337. i hear that most people are mounting the Starlink router in the pass-through bay... any particular place? I am assuming that it is powerful enough for all of the inside of the RV? I guess I plan on running the wiring through the hole in the...

Hi everyone, we just purchased a new 22MLE. We need to have enough power to run starlink for RV so my wife can work. It’s a bit overwhelming with some of the installations I have seen. We are looking for something simple like portable solar panels, upgrade batteries and install an inverter...

I just got my Starlink RV dishy and am wondering if anyone has figured out a very clean way to create a wire passthrough hole for the cable connection. My router will reside in the upper cabinet just to the right of the front door on our 2021 5.0. We elected to have ETI install the full height...

Picked up our shiny new 390RK last week and took it out on an inaugural run. We've owned about 6-7 travel trailers but this is our first fifth wheel. First day we had the Starlink on the ground, but ended up putting it in the air on day 2.