George Johnson
Senior Member
This is a tale of one thing leads to another. I recently replaced the WFCO electrical control panel in my first generation '09 19er with a Progressive Dynamics panel that will allow me to use lithium batteries in the future if I choose to do so. This got my nose down to the floor where I could read the fine print on the adjacent propane alarm, which stated that the alarm should be replaced every five years. Hmmm, OK, guess I should do that ,too.
These days, CO and propane alarms are available in a single combined unit, so I bought one of those and after installing it, I looked to remove my old CO alarm located in the cabinet above the bed. The fine print on the face of that unit also said to replace the unit every five years. Well and good, already done.
Now comes the interesting part. The literature in the box for the new unit explains why we need to replace the entire alarms every five years. It seems that over time the sensors in the alarms either wear out or become inoperative over the span of five years and can no longer detect the gases they are intended to detect. Furthermore, the periodic tests we are supposed to do whenever we take our trailers out on the road only determine if electricity is flowing to the test modules--they to not indicate that the units are in fact able to detect the gases if they are present in the atmosphere. That was news to me.
So here's a word to the wise. Do check your alarms as instructed for their electrical supply, but every five years replace them with new alarms that have not outlived their useful lives. Exposure to atmospheric contaminants seems to cause loss of sensitivity of the alarms over time, even though our routine testing indicates the alarms are good to go.
The alarms I replaced were original to the trailer and were 14 years old.
These days, CO and propane alarms are available in a single combined unit, so I bought one of those and after installing it, I looked to remove my old CO alarm located in the cabinet above the bed. The fine print on the face of that unit also said to replace the unit every five years. Well and good, already done.
Now comes the interesting part. The literature in the box for the new unit explains why we need to replace the entire alarms every five years. It seems that over time the sensors in the alarms either wear out or become inoperative over the span of five years and can no longer detect the gases they are intended to detect. Furthermore, the periodic tests we are supposed to do whenever we take our trailers out on the road only determine if electricity is flowing to the test modules--they to not indicate that the units are in fact able to detect the gases if they are present in the atmosphere. That was news to me.
So here's a word to the wise. Do check your alarms as instructed for their electrical supply, but every five years replace them with new alarms that have not outlived their useful lives. Exposure to atmospheric contaminants seems to cause loss of sensitivity of the alarms over time, even though our routine testing indicates the alarms are good to go.
The alarms I replaced were original to the trailer and were 14 years old.
