Extra cushion fabric for leg and foot rest.

[weinell@cox.net]

We want to have an additional cushion made for our E-19 to place across the dinette area seating area. We didn't have the table or post for the table installed so that we could use the area for a "sitting area". An additional cushion across the middle would be perfect for us. Has anyone purchased exact fabric from the manufacturer or had them make an extra cushion? Which company carries the fabrics that Escape uses? We have the Claro Ash fabric which is like a soft leather.

 

[brroberts]

Not sure where ETI gets its fabric, but we have 2 yards of Summit Ash coming right now. It has taken a while, and still may be a while before it arrives. It’s also taken a few emails and calls to ETI, but they will do this for you. It won’t be cheap either, but sourcing our exact match proved difficult otherwise.

 

[weinell@cox.net]

I did call Escape this morning after posting here. They can get the fabric but she was unsure of exact price but would be under $200 but I don't know if that is per yard. I later found a company called Patio Lane out of Florida. I was able to order a custom cushion for a reasonable price in the same brand and type of fabric but a coordinating color since they didn't have the gray. We only needed it to be 30inches x 12 to extend past the cushions in the dinette (for a foot/leg rest) It will also allow us to use the area as a single bed if we don't want to make it into a full bed. We already built a roll up platform for this so we aren't carrying the huge table that fits in the area over the ledge. I will let you know how the cushion turns out when we get it. Total cost was $161 with free shipping.

 

[jack sparrow]

Hey All, I Made an order with ETI about 6 months ago for two of the corner pillows in my "U" shaped dinette area. I had made an extension for your legs / and twin size bed I call it if need be. It works great for us and can be dissembled in a moment.

The cushions were pricey to say the least. plus the shipping. I'll have to look back at my invoice to give you the figures. I had also ordered some extra fabric just in case I ever needed it.

Here is a link to the photo I have here on the forum. Enjoy..

https://www.escapeforum.org/attachments/img_1546-jpeg.740534/

Cheers to ya.........and Happy Trails..........Jack

 

[Ron in BC]

We only needed it to be 30inches x 12 to extend past the cushions in the dinette (for a foot/leg rest) It will also allow us to use the area as a single bed if we don't want to make it into a full bed. We already built a roll up platform for this so we aren't carrying the huge table that fits in the area over the ledge.

I'm having some difficulty visualizing exactly what you're doing. Please post a photo after you have it in place.

Ron