We also ordered a yard of the fabric we were going to use. A little sample can look so different. I made that mistake with upholstery fabric before. Couldn't recognize what I got!
I like geometric patterns Jim. My only caution (minor) would be that the whiter fabric might be harder to keep looking clean. Are you asking whether or not the valances should be done in the same fabric as the cushions? Most people go that way, unless you specify otherwise.
I thought I was going Crazy hand flush Fabric?
When ETI does your seat covers can you remove them from the foam are they sewn in or zippered.
The fabric we have chosen is not sunbrella it's for outdoor furniture seems to be heavy enough . The white might get dirty but if zippered in could be dry cleaned or washed ? Jim
I thought I was going Crazy hand flush Fabric?
When ETI does your seat covers can you remove them from the foam are they sewn in or zippered.
The fabric we have chosen is not sunbrella it's for outdoor furniture seems to be heavy enough . The white might get dirty but if zippered in could be dry cleaned or washed ? Jim
We have rethought our Fabric going with a med blue Sunbrella Sapphire and Colorodo Slate Formica. Something like Spokan escape person s 21 we now are rethinking front box I went to schools welding shop and getting an alum box made up we are real close to finishing our build sheet we will have it shipped to Goshen Indiana in Nov
Hopefully going out next week to ETI to bring fabric and finalize everything I've been told the new 21 should be done then Jim
I've been told that the microwave plug is there in the cabinet whether you get the microwave or not . Some questions
1- what size microwave and brand is the $110 option
2-I was thinking of putting in a larger inverter then 1500 watts so i could run microwave and hair dryer not at the same time
3- placement of battery does it have to be on passengers side on a 21 ?
4- I would also like to have an inverter plug where the microwave plug is
5-One way to get it is to order there inverter with all plugs working off inverter
6- How hard is it to run wires once you get this camper? I'm having ETI run 2 12 volt lines for LED lights over bed and over dinette .Maybe have them run a 110 volt line from back of microwave to battery location for future plug? I'm also having a wire run for a back up camera .I've not heard good things about the wireless backup cameras
the only time I could see this happening is stopping at a rest stop or when and if we boondock which could happen.