cpaharley2008
Senior Member
In preparation for the trip to California and then Osoyoos, I washed Prairie Schooner, hooked her up and checked level and tried to install the spare key lock. The lock will not work with the spare, the concentric holes and the smaller lug nut end up bending the lock metal to where it will not function. So, no luck on the lock.
When leveling the hitch for towing, my counter and table show level, but the floor indicates a little low in front?? It looks level and the belly band is level, but why the hecht is the floor not?
Turned the refer to propane and turned the external fan switch on. It is in the mid 70's and the fan is operating on/off as it should. So the set points are lower than the manual specifications. The refer is holding 11/34 on setting 3 with 73 outside. I'll update this report once we hit the 90's in Texas and Oklahoma on Wednesday and Thursday.
When leveling the hitch for towing, my counter and table show level, but the floor indicates a little low in front?? It looks level and the belly band is level, but why the hecht is the floor not?
Turned the refer to propane and turned the external fan switch on. It is in the mid 70's and the fan is operating on/off as it should. So the set points are lower than the manual specifications. The refer is holding 11/34 on setting 3 with 73 outside. I'll update this report once we hit the 90's in Texas and Oklahoma on Wednesday and Thursday.