2015 Escape 21 for sale in Washington State - Escape Trailer Owners Community

Go Back   Escape Trailer Owners Community > Classifieds | Buy, Sell, Swap > Classifieds Archive
Click Here to Login
 
 
Thread Tools Display Modes
 
Old 11-04-2018, 08:31 PM   #1
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
2015 Escape 21 for sale in Washington State

Our gently used and pampered 21 Escape Travel Trailer is on sale for $27,000. Always stored indoors, it still looks like new inside and out, and the original factory tires are still in excellent condition. In addition to the many factory upgrades, also included (see photos) is a very unique gas pedestal mounted bistro table for maximum enjoyment of the u-shaped lounge. Its very convenient for smaller meals and drinks, or it can be lowered to use as a foot rest. Also included is the full size factory Escape Dinette table for larger meals.


The following list identifies the optional upgrades from Escape Travel Trailer Industries:


Front storage box
Power tongue jack
U-shaped Dinette
Upgraded fabric (exquisite Sunbrella Tango Mink @ $46 per yard)
Upgraded Formica (Burnished Glaze)
2-way hot water tank
3-burner stainless steel stove, stove cover and range hood
Stainless steel sink and chrome faucet
Microwave
TV ready with 120V outlet and wall mount extendable TV arm
Extra 12V interior outlets
Upgraded interior/exterior lighting with additional fixtures and switches
Counter extensions (2)
Air Conditioning
Digital thermostat
Cubby bins
Front window w/protective awning (great option for extra light and keeping an eye on tow vehicle)
Bath window
Additional access door for under bed storage
Upgraded interior wall reinforcing
Foot flush toilet w/shut-off valve
Extra insulation package, including dual pane windows
Spray-in floor insulation, including heated holding tanks (excellent insurance against unexpected freeze)
Heavy-duty dual 6V batteries (we have dry camped for 7 days with these on a single charge)
Surge protector
Aluminum rims
Upgraded metallic red graphics
Removable power chord
Rear hitch receiver w/electric connector (easy addition of a bike rack)

Additional extras:

Additional Tango Mink fabric sufficient to re-cover all cushions!
Cabinet-quality pull-out drawer to enhance usability of under bed storage
Cabinet-quality cubbies at end of bed (lift-out removable returns trailer to stock cabinet configuration)
All stainless gas lift pedestal. Typically found in expensive yachts, it has a retail price of well over $1,000.
Andersen WD anti-sway hitch also available for additional $250 (like new since hitch not used)

Right or wrong, my rationale for options intentionally not ordered:

1. Solar - expensive unprotected panels exposed to hail, falling branches, etc.

2. Inverter not needed since most devices are available that operate directly on 12V (and using 12V directly is more efficient than inverting 12V to 120V.) The obvious exception is the microwave but I wouldnt use this appliance while dry camping because of the heavy draw on the batteries.

3. Exterior shower - this external plumbing fixture is not insulated and thus poses a risk if caught in a freeze
Attached Images
File Type: jpg BP1000585_InPixio_InPixio.jpg (221.4 KB, 156 views)
File Type: jpg CP1000586_InPixio_InPixio.jpg (170.3 KB, 135 views)
File Type: jpg EP1000590_InPixio_InPixio.jpg (203.1 KB, 200 views)
File Type: jpg FP1000601_InPixio_InPixio.jpg (164.3 KB, 175 views)
File Type: jpg GGP1000606_InPixio_InPixio.jpg (184.6 KB, 162 views)
File Type: jpg GP1000605_InPixio_InPixio.jpg (166.0 KB, 164 views)
File Type: jpg HP1000591_InPixio_InPixio.jpg (264.4 KB, 159 views)
File Type: jpg IP1000598_InPixio_InPixio.jpg (248.2 KB, 156 views)
__________________

windblade is offline  
Old 11-04-2018, 09:22 PM   #2
Senior Member
 
Join Date: Oct 2018
Location: Front Range, Colorado
Trailer: 2018 21’ The Last Hurrah
Posts: 439
Where are the batteries physically located in your unit?
I would need access for a freestanding solar setup

Thank you
__________________

EdColorado is offline  
Old 11-04-2018, 10:03 PM   #3
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
The batteries are located under the dinette bench seat, passenger side.
windblade is offline  
Old 11-05-2018, 02:38 PM   #4
Junior Member
 
Join Date: Mar 2018
Location: Vancouver, Washington
Trailer: 2019 5.0 TA
Posts: 8
My husband and I are interested in your rig, it looks perfect for us! How can I contact you? I sent you a private message as well.
Ellen Harper is offline  
Old 11-05-2018, 04:54 PM   #5
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
Hi Ellen, thank you for contacting me. I have replied to your private message with contact information.
windblade is offline  
Old 11-05-2018, 06:04 PM   #6
Senior Member
 
Join Date: Sep 2016
Location: North Vancouver, British Columbia
Trailer: 2019 Escape 21 towed by F-150 with 2.7l eb, formerly Escape 17B 2017
Posts: 551
What does the drawer under the bed run on? Do you have drawer slides or what. Thanks much. Just looking at ideas.
Chris & Patricia is offline  
Old 11-06-2018, 12:57 AM   #7
Junior Member
 
Join Date: Jun 2014
Location: MeNo$, Wisconsin
Trailer: 19' - Oct 2o15
Posts: 29
Good Morning Greg -
What kind of "quick connect" is there that allows you switch table tops ?
What is the size of the drawer under the bed ? Is it on rollers/slide/? ?
Is there a second door under the bed by the shower ?
Is the four hole cubby by the bed build by ETI or did you make it ?
Thank You Gred for Your Time & Considerations.
Have A GReat Day & A Better Weekend.
rw
OWilly is offline  
Old 11-06-2018, 03:00 PM   #8
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
Upgrade Questions

There have been several questions regarding the enhancements shown in my interior photos. Though not related to the sale of my trailer, I am happy to try and answer questions from those considering similar modifications to their Escape 21. The cubby cabinet that you see in the photo was not available from Escape at the time of my purchase in April 2015. It was a bit of a carpentry challenge due to the curved nature of the Escape 21 exterior walls, but well worth the effort to have this handy storage location for so many additional miscellaneous items.

The large storage drawer shown in the interior photo was made as part of a major revamp of the entire under-bed storage area. Although vast in size, I found the convenience and usability of this large storage area problematic. We found it difficult to get down on our hands and knees and peer into this cavernous space looking for something that we were pretty sure should be in there somewhere. And equally difficult, if not impossible, was finding the strength to lift the mattress and bedding to open this large area from the top. So, I partitioned this under-bed storage area into three separate cabinets. One cabinet is 32L x 14W x 13H and is serviced by the drawer that you see in the photo. If you have gliding issues, use stick-on Teflon tape on the bottom of the cabinet!

A second cabinet was constructed adjacent to this one moving toward the bathroom. We use this cabinet as our clothes hamper. A small hinged access door was added to the top where dirty laundry is dropped in, and the Escape installed cabinet door on the bottom is used to pull out clothes on laundry day. The top door is easy to open since it is just a small corner of the mattress that need be lifted. The third area toward the head of the bed is accessible from the exterior hatch.
windblade is offline  
Old 11-06-2018, 03:49 PM   #9
Senior Member
 
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 1,917
is it hard to go from round table to big table? i like the round table but i sometimes use that area for an extra bed.
Fox hunt is offline  
Old 11-06-2018, 04:22 PM   #10
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
Round Table to Bed

This is a very easy conversion. You simply push down the gas rise pedestal and lock into position, then pull out two lightweight boards - one from behind each of the two side dinette back cushions. Of course, you can also use the large dinette table stored under the permanent bed mattress since the round table drops below the height of the ledges. But no need to bother with that since the two small boards are right there handy and each one is so much lighter and easier to handle than the large dinette table. Worried about the strength of those lightweight boards? No need to fret about that - once the bed is made simply loosen the levers allowing the gas rise pedestal with round table to push up and support the boards from below; then re-lock pedestal. It is a wonderful system.
windblade is offline  
Old 11-06-2018, 04:27 PM   #11
Senior Member
 
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 1,917
I like your solution now have to figure out how to get a small round table cut.
Fox hunt is offline  
Old 11-06-2018, 04:31 PM   #12
Senior Member
 
escape artist's Avatar
 
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 6,231
Quote:
Originally Posted by Fox hunt View Post
I like your solution now have to figure out how to get a small round table cut.
Hi: Fox hunt... Use a "Circular saw"!!! Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
escape artist is online now  
Old 11-06-2018, 06:58 PM   #13
Senior Member
 
John in Santa Cruz's Avatar
 
Join Date: Dec 2017
Location: Mid Left Coast, California
Trailer: 2014 Escape 21
Posts: 1,554
curious what brand/model that maine table pedestal is?
__________________
2014 Escape 21 (home away from home)
2002 Ford F250 7.3 Diesel 4x4 (tug)
1993 Mercedes 300CE Cabriolet (daily driver)
2006 Yellow Lab (Maggie... RIP Feb 2019 )
John in Santa Cruz is offline  
Old 11-06-2018, 07:15 PM   #14
Senior Member
 
dfandrews's Avatar
 
Join Date: Sep 2014
Location: Ventura County, California
Trailer: 2015 Escape 17A -- "The Pullman"
Posts: 1,848
Quote:
Originally Posted by Fox hunt View Post
I like your solution now have to figure out how to get a small round table cut.

Kate,
I have occasionally seen plywood rounds (circular, 24 to 30" diameter) at the big box lumber dealers (Home Depot, Lowes, etc.). But then, you'd have to finish it or laminate & trim. You might try inquiring at a cabinet shop, instead.
Edit: Maybe Myron will chime in: I think he did one on a chunk of irregular wood, w/finishing with whatever was in his shop.
__________________
Don & Teresa
2015 17A: 2011 Honda Pilot
In Orbe Terrum Non Visi / RLTW
dfandrews is offline  
Old 11-06-2018, 07:23 PM   #15
Senior Member
 
John in Santa Cruz's Avatar
 
Join Date: Dec 2017
Location: Mid Left Coast, California
Trailer: 2014 Escape 21
Posts: 1,554
yeah, any kitchen remodel contractor, or cabinetmaker, could easily cut a round and laminate with your preferred surface. they use computer controlled router tables to cut pieces like that.
__________________
2014 Escape 21 (home away from home)
2002 Ford F250 7.3 Diesel 4x4 (tug)
1993 Mercedes 300CE Cabriolet (daily driver)
2006 Yellow Lab (Maggie... RIP Feb 2019 )
John in Santa Cruz is offline  
Old 11-07-2018, 01:17 PM   #16
Senior Member
 
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 1,917
i will look into it
Fox hunt is offline  
Old 11-08-2018, 12:42 PM   #17
Junior Member
 
Join Date: Aug 2014
Location: Poulsbo, Washington
Trailer: 2015 21' Escape
Posts: 17
Our Escape 21 trailer is now in "sale pending" status.
windblade is offline  
Old 11-08-2018, 01:20 PM   #18
Senior Member
 
Join Date: Oct 2018
Location: Front Range, Colorado
Trailer: 2018 21’ The Last Hurrah
Posts: 439
Quote:
Originally Posted by Fox hunt View Post
I like your solution now have to figure out how to get a small round table cut.

Amazon. Where else?

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
EdColorado is offline  
Old 11-08-2018, 01:32 PM   #19
Senior Member
 
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 1,917
what size is you round table?
Fox hunt is offline  
Old 11-08-2018, 10:31 PM   #20
Junior Member
 
Join Date: Nov 2018
Location: Port Townsend, Washington
Trailer: none
Posts: 1
escape 21

Hi Interested in your trailer. We live nearby.
My number is 360 379 5478
Thanks
Tom
__________________

CHRONOTHERM is offline  
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Escape Trailer Industries or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 01:16 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.
×