|
01-16-2019, 09:31 PM
|
#1
|
Senior Member
Join Date: Apr 2018
Location: Fort Collins, Colorado
Trailer: 2017 Escape 19
Posts: 255
|
Solar question
Our 2017 19’ is prewired for solar. We are going to this year’s rally in Osoyoos and I am considering an appointment to have ETI install the rooftop solar. At purchase, I had ETI install a Zamp port, wired directly to the batteries to use my portable solar panel with its own controller. So far that’s worked fine, but just to make life easier and possibly ensure longer battery life, I am considering the fixed panel.
My question is, would I still be able to use my portable panel with controller, using the Zamp port wired directly to the batteries if I also have the rooftop unit? Or would I need to bypass the portable’s controller and wire the Zamp port into the rooftop’s contoller?
Fun fact: I had been using a 60w Renogy portable unit, but then at last year’s Escape rally, my doorprize was a new GoPower 100w portable! I know it is possible to combine my two existing portables, but I have read it is a bit of a hassle due to two different brands. I also like the idea of just using the rooftop most of the time and only bringing a portable when we anticipate too much shade.
Thanks to everyone for all I’ve learned on the forum! I was just a desk jockey my whole career. You craftsman, techie and engineer types are really impressive! Sad part is that I understand a bit less than half of some of the threads, but I try.
|
|
|
01-16-2019, 10:12 PM
|
#2
|
Senior Member
Join Date: Jul 2018
Location: Boulder, Colorado
Trailer: 2018 Escape 19'er + 2018 Highlander
Posts: 300
|
Quote:
Originally Posted by ColoradoSwany
Our 2017 19’ is prewired for solar. We are going to this year’s rally in Osoyoos and I am considering an appointment to have ETI install the rooftop solar. At purchase, I had ETI install a Zamp port, wired directly to the batteries to use my portable solar panel with its own controller. So far that’s worked fine, but just to make life easier and possibly ensure longer battery life, I am considering the fixed panel.
My question is, would I still be able to use my portable panel with controller, using the Zamp port wired directly to the batteries if I also have the rooftop unit? Or would I need to bypass the portable’s controller and wire the Zamp port into the rooftop’s contoller?
Fun fact: I had been using a 60w Renogy portable unit, but then at last year’s Escape rally, my doorprize was a new GoPower 100w portable! I know it is possible to combine my two existing portables, but I have read it is a bit of a hassle due to two different brands. I also like the idea of just using the rooftop most of the time and only bringing a portable when we anticipate too much shade.
Thanks to everyone for all I’ve learned on the forum! I was just a desk jockey my whole career. You craftsman, techie and engineer types are really impressive! Sad part is that I understand a bit less than half of some of the threads, but I try.
|
During our 19'er's build, my understanding is ETI wired our external, portable solar panel zamp port into the rooftop, fixed solar panel's controller. That being the case, you'd probably need to have the zamp port re-wired into the rooftop solar's controller too. While I have no idea if this is the case, you wouldn't want to different solar controllers "fighting" each other while trying to supply current to the battery.
BTW... The solar panels and controller are on the battery side of the 12v master switch, so even when the batteries are switched off from the trailer, they're still being charged by the rooftop panels.
My Victron battery monitor shows 13.67v steady state when the batteries are on the converter (in-house charger) and not under load. The monitor shows 13.91v when the batteries are disconnected from the trailer thru the master switch and just being charged from the solar panels. 'not sure if the 0.24v difference is important/significant or not.
__________________
... Greg
2018 Escape 19'er & 2018 Highlander
Not all who wander are lost
|
|
|
01-16-2019, 11:02 PM
|
#3
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Quote:
Originally Posted by ColoradoSwany
.... My question is, would I still be able to use my portable panel with controller, using the Zamp port wired directly to the batteries if I also have the rooftop unit? Or would I need to bypass the portable’s controller and wire the Zamp port into the rooftop’s contoller? ....
|
This question has been cussed and discussed previously on this forum, but I believe the take-home message was that any panel with its own controller can be wired directly to the battery with no problem, but every panel needs to connect through a controller to prevent damage from over-charging. Or something like that. The second option you mentioned (bypass portable's controller and wire the portable directly into the rooftop's controller) should also work fine because the one controller will prevent either panel from battery over-charge damage. I repeat - or something like that....
|
|
|
01-17-2019, 06:13 AM
|
#4
|
Senior Member
Join Date: Feb 2018
Location: alpharetta, Georgia
Trailer: 2014 21' Escape
Posts: 494
|
ColoradoSwaney, I agree with you 100%, I really enjoy reading the forum and wish I lived right down the street from several of the forum members so I could hands on learn from them. I just don;t feel I have the skills and knowledge to do many of the things I read about.
Enjoy the journey,
Steve
|
|
|
01-17-2019, 07:00 AM
|
#5
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Quote:
Originally Posted by stratos175
ColoradoSwaney, I agree with you 100%, I really enjoy reading the forum and wish I lived right down the street from several of the forum members so I could hands on learn from them. I just don;t feel I have the skills and knowledge to do many of the things I read about. Enjoy the journey, Steve
|
I wonder if camper modifications follow the 90/10 rule where 90% of the serious mods are being done by just 10% of the owners. We've owned our 21' for 2 years now, and the only mod we've done is add a second access door under the bathroom side of the bed. We bought the little door pre-fabbed from ETI, so all we needed to install it was a saw and a screwdriver, and I can handle that. Other than that one oversight that we should have included to our original build sheet, we're content camping in an ETI factory "stock" trailer.
|
|
|
01-17-2019, 07:03 AM
|
#6
|
Senior Member
Join Date: Sep 2009
Location: Southwick, Massachusetts
Trailer: None, sold my 2014 5.0TA
Posts: 7,124
|
See post 14 for Alan's write up.
This one was incorrect.
__________________
Happy Motoring
Bob
|
|
|
01-17-2019, 11:02 AM
|
#7
|
Senior Member
Join Date: Apr 2013
Location: Emerson, Manitoba
Trailer: 2016 Escape 5.0TA, 2022 F150 2.7EB
Posts: 1,848
|
Quote:
Originally Posted by padlin
It is my belief that with 2 controllers... If the rooftops controller is outputting say 14.5vdc while charging and you go out and hookup the portable, the suitcases controller will see the 14.5vdc and conclude the batteries are charged and no output.
|
I've only once had my portable hooked up (directly to batteries) once last summer when had a few days in a shaded spot. With the rooftop constantly in shade I moved the portable around into the sun. The batteries came back to full very quickly. I only plan on taking the portable on future trips when know I'll be in a very shady spot. We bought the portable when we had our old 5.0 without solar and at that time hadn't planned on a newer trailer.
__________________
Adrian (and Beth)
We are all travellers in the wilderness of this world, and the best we can find in our travels is an honest friend.
Robert Louis Stevenson
|
|
|
01-17-2019, 01:12 PM
|
#8
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Quote:
Originally Posted by War Eagle
I wonder if camper modifications follow the 90/10 rule where 90% of the serious mods are being done by just 10% of the owners. We've owned our 21' for 2 years now, and the only mod we've done is add a second access door under the bathroom side of the bed. We bought the little door pre-fabbed from ETI, so all we needed to install it was a saw and a screwdriver, and I can handle that. Other than that one oversight that we should have included to our original build sheet, we're content camping in an ETI factory "stock" trailer.
|
My guess would be you are dead on with this assessment. We probably have way less than 10% of the total Escape Owners that are ever seen on the forum, and most are probably using the stock trailer till they move on. Even the 3 Scamps I've redone, very few if any changes or mods were ever done to them.
|
|
|
01-17-2019, 02:04 PM
|
#9
|
Senior Member
Join Date: Apr 2018
Location: Fort Collins, Colorado
Trailer: 2017 Escape 19
Posts: 255
|
Thanks for the input everyone! Looks like I’ll be making some changes to the portable solar hookup if we get the rooftop.
|
|
|
01-17-2019, 02:17 PM
|
#10
|
Senior Member
Join Date: Nov 2015
Location: Baytown, Texas
Trailer: 2017 21' Escape - upgraded version
Posts: 2,697
|
Quote:
Originally Posted by War Eagle
I wonder if camper modifications follow the 90/10 rule where 90% of the serious mods are being done by just 10% of the owners. We've owned our 21' for 2 years now, and the only mod we've done is add a second access door under the bathroom side of the bed. We bought the little door pre-fabbed from ETI, so all we needed to install it was a saw and a screwdriver, and I can handle that. Other than that one oversight that we should have included to our original build sheet, we're content camping in an ETI factory "stock" trailer.
|
I guess I'm in the 10%. I began making changes as soon as I had the trailer home from Chilliwack. I believe that just because the trailer isn't exactly the way you wanted from the factory, it doesn't mean you can't have it the way you want.
__________________
Normal people believe that if it ain't broke, don't fix it.
Engineers believe in fixing it so that it never breaks.
|
|
|
01-17-2019, 08:19 PM
|
#11
|
Senior Member
Join Date: Sep 2016
Location: Bremerton, Washington
Trailer: 2019 5.0 TA
Posts: 1,141
|
Quote:
Originally Posted by padlin
I've always heard you are better off having the portables port wired into the on board controller and bypassing the suitcase's controller.
It is my belief that with 2 controllers... If the rooftops controller is outputting say 14.5vdc while charging and you go out and hookup the portable, the suitcases controller will see the 14.5vdc and conclude the batteries are charged and no output.
Keep in mind, I'm no expert.
|
This has not been my experience. I have a 90W portable suitcase solar panel with it's own controller. I use it directly connected to the batteries while at the same time the roof top factory system is doing its job. The batteries top up faster with the portable connected. In fact if Paula has cooked dinner in the insta-pot the night before, the roof top panels (90W + 60W) barley get the batteries back to full charge the next day. With the portable attached, they are fully charged by mid-day. (90W + 90W + 60W)
And ... that is with my new roof top panel hooked up incorrectly in series instead of parallel for my PWM controller as I learned this week. Thanks TDF-Texas!
__________________
- Arnie & Paula & Kizzy the rat terrier
https://www.arniesea.com
- 2019 5.0 TA, 2017 Tundra Platinum.
- Bremerton, WA
|
|
|
01-17-2019, 09:24 PM
|
#12
|
Senior Member
Join Date: Mar 2016
Location: Burlington Twp., New Jersey
Trailer: 2010 Escape 19
Posts: 7,146
|
Quote:
Originally Posted by War Eagle
I wonder if camper modifications follow the 90/10 rule where 90% of the serious mods are being done by just 10% of the owners.
|
Yes, some of us have admitted we are tinkerers who enjoy projects. I guess my running list of almost 20 mods that is a sticky under Modifications and Alterations is a bit of a giveaway. Seems to be a good number of engineer types on the forum. Working on it and making improvements is part of the fun. The great thing is that you can also do nothing and they are a fantastic trailer.
|
|
|
01-17-2019, 09:43 PM
|
#13
|
Senior Member
Join Date: Nov 2013
Location: Jeromesville, Ohio
Trailer: 2014 Escape 21' pulled with 2014 Silverado Crewcab
Posts: 854
|
Quote:
Originally Posted by rubicon327
Yes, some of us have admitted we are tinkerers who enjoy projects. I guess my running list of almost 20 mods that is a sticky under Modifications and Alterations is a bit of a giveaway. Seems to be a good number of engineer types on the forum. Working on it and making improvements is part of the fun. The great thing is that you can also do nothing and they are a fantastic trailer.
|
Guilty...
__________________
Carl,
"Isn't it amazing how much stuff we get done the day before vacation?"
Zig Ziglar
|
|
|
01-17-2019, 11:34 PM
|
#14
|
Senior Member
Join Date: Apr 2014
Location: Arvada, Colorado
Trailer: 2015 E'21 - 'Velocity'. Tow: Toyota Tacoma V6, 4X4, manual.
Posts: 1,692
|
Quote:
Originally Posted by padlin
...
It is my belief that with 2 controllers... If the rooftops controller is outputting say 14.5vdc while charging and you go out and hookup the portable, the suitcases controller will see the 14.5vdc and conclude the batteries are charged and no output.
|
To split some hairs...
If you hook up one panel/controller to the battery and measure 14.5 vdc at the battery then your battery is charged. So if you hook up the second system, also set to roughly 14.5 vdc then you are correct, it will think the system is charged. But the point here is the battery is charged, not that there are two solar systems hooked up to it.
But look at the problem from the battery's point of view. A big lead-acid battery that is hungry for power can absorb 50+ amps initially. Your (and mine) peanut sized panel/controller can only put out 5 to 10 amps - at best. So the battery rises slowly from hungry to full (12.0 to 14.5 for example).
Now hook the second panel-controller directly to the battery. It will see the battery terminal voltage of 12.0 at the beginning. It won't know or care that another system is trying its darnedest to charge the battery. It will contribute its own 5 to 10 amps - until the battery begins to approach what ever voltage that slows the rate of charge below the combined output. A rough guess would be around 13.8.
To verify what I am saying, hook up a constant current - constant voltage supply (any size is ok) to a drained battery. It will charge at the set current for a few hours. Measure the voltage on the battery - it will be lower than the voltage setting on the supply. After a few hours the voltage at the battery begins to rise and the amps drop off. Eventually the voltage reaches the setting on the supply (hopefully you set it around 14.5 vdc). At that point the amps could be 1 or 2, or perhaps less depending on the battery. Should you be using a 50 amp supply then the above demo won't apply (and more power to you). But we're talking solar panel size input here.
Quote:
Originally Posted by padlin
With both panels feeding the same controller the currents are combined in the controller with a single output.
|
I combine my portable with the fixed roof panel. Why? Because I didn't want (or need) a second controller. But aside from a bit of loss due to efficiency considerations, it wouldn't bother me to use both.
--
Alan
|
|
|
01-17-2019, 11:53 PM
|
#15
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
There are pluses and minuses to solar.
The hydrogen fuel at the core of the Sun will finally be exhausted in five billion years, when the Sun will be 67% more luminous than at present.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
01-18-2019, 08:51 AM
|
#16
|
Senior Member
Join Date: Apr 2012
Location: Edmonton, Alberta
Trailer: 2013 19' & 2013 15B
Posts: 2,636
|
Quote:
Originally Posted by gbaglo
There are pluses and minuses to solar.
The hydrogen fuel at the core of the Sun will finally be exhausted in five billion years, when the Sun will be 67% more luminous than at present.
|
You will need to buy stronger sunglasses!
__________________
2013 19' \ 2013 15B, 2020 Toyota 4Runner TRD Offroad
"It is better to remain silent at the risk of being thought a fool, than to talk and remove all doubt of it." - 1907, Maurice Switzer
|
|
|
01-18-2019, 09:12 AM
|
#17
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by skiman
Guilty...
|
and then there are those who have already made planned modifications to their trailer that has yet to be built.......... I'm taking some tools and parts to make changes at Osoyoos the day of delivery.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|