|
09-18-2014, 07:38 PM
|
#1
|
Senior Member
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 5,136
|
19' Counter Space - Second Counter Plexi
If you use your stove all the time, you probably won't be interested in this but we use the microwave quite a lot.
I had a big piece of Plexiglass around and decided I would use part of it as a counter in our 19'. Didn't want to bother with our radial arm saw so took it to True Valu and for $2 they cut it to the counter dimensions, I think 32 3/4 inches by 22 1/2 inches. I taped things I had lying around to the underside such as a jar cap, corks, plastic bottle. The bottle diameter is greater than the height of burner knobs so as to clear them. The plexi at the burners sits on the burners. The corks at the side keep the Plexi from bending down and the cap and a cork are anchors in case it somehow moves forward, which is not likely. The Plexi is probably 1/4" and is heavy enough to stay put.
It is hard to see this but the stove is all under the Plexiglass and the pot holders and wood trivet are on top of the Plexi. So there is now counter from the wall to the sink and front to back. We can put it under the bed when not in use.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
|
|
|
09-18-2014, 07:50 PM
|
#2
|
Senior Member
Join Date: Sep 2010
Location: Kelowna, British Columbia
Trailer: 2008 Escape 17b
Posts: 1,868
|
How will you keep it from getting scratched?
|
|
|
09-18-2014, 08:18 PM
|
#3
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
I don't get the rationale for a 2nd counter layer. I just cover the stove with a cutting board and we've got lots of work space.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
09-18-2014, 08:22 PM
|
#4
|
Senior Member
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 5,136
|
Your work space is on different levels. This is all one level which gives much easier and more stable space to work in.
I was putting something on the stove too where things could just fall off of it.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
|
|
|
09-18-2014, 08:37 PM
|
#5
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,051
|
I like it!
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
09-18-2014, 08:37 PM
|
#6
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
I get the one-level idea - I find small bits of counter adjacent to stuff which is not flush are pretty useless, because you can't set anything of any significant size down without it falling over (tall stuff) or sliding away (plates). This is an interesting solution.
|
|
|
09-18-2014, 08:44 PM
|
#7
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Interesting. I think I'd prefer it though if it were made of a sheet of opaque material, like the stuff they use to make plastic cutting boards. I fully appreciate though that you used what you had. Waste not want not.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
09-18-2014, 09:56 PM
|
#8
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,813
|
Whoa, you had me there for a second. I'm going to be posting tomorrow and the title will be identical except for the last word. For a second I thought you'd read my mind
I'm a great fan of using available resource materials, the stuff my wife calls my junk . 2 bucks and you've got a nice large smooth surface, good idea.
Ron
|
|
|
09-18-2014, 11:43 PM
|
#9
|
Senior Member
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 5,136
|
Contact paper can be put on the Plexi to decorate it how you want and that would not be see-through. I might do that but I kind of like seeing the Plexi.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
|
|
|
09-19-2014, 10:14 AM
|
#10
|
Senior Member
Join Date: Sep 2010
Location: Kelowna, British Columbia
Trailer: 2008 Escape 17b
Posts: 1,868
|
I think it's a great idea having just the one level however, I've worked a lot with plexi and it does have it's drawbacks. It scratches very easily, and 1/4" plexi will warp over a short period of time if it's weight isn't evenly distributed. It wouldn't surprise me if you used this plexi counter top as a proto type for a counter top of a different material.
|
|
|
09-19-2014, 10:56 PM
|
#11
|
Senior Member
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 5,136
|
I have a very thin wood laminate around that I did not think of until you mentioned scratches. But contact paper would take care of that or how about taping camping photos on top. I am not worried about warping since I have had that Plexi for a couple of decades and it's flat. I have plenty of scrap such as beautiful fir but it would weigh too much. I like bamboo and it is light but scratches also. I like the look of the Plexi and will put up with scratches or cover any with photos if they look bad.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|