|
|
03-13-2024, 07:40 AM
|
#41
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by Ron in BC
What does that mean "doesn't want to hear about them" ?
Ron
|
Just that - Escape Interim President ignored my email and UPS letter and paperwork documenting a water leak ongoing issue we have with our brand new trailer. I have no confidence they'll be responsive to the window issue and refrigerator door issue we've just discovered.
|
|
|
03-13-2024, 09:13 AM
|
#42
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,554
|
Quote:
Originally Posted by Gumpdad714
Just that - Escape Interim President ignored my email and UPS letter and paperwork documenting a water leak ongoing issue we have with our brand new trailer. I have no confidence they'll be responsive to the window issue and refrigerator door issue we've just discovered.
|
I have been dealing with a couple things lately, one broken window hardware and the other getting a Springfield pedestal for my brothers trailer. I got very fast response on both accounts. They sent me a couple window hardware pieces though now they don't use Hehr anymore they don't need them. With the pedestal they gave me a price to supply much better than I could find elsewhere, even shipped to Calgary.
BTW, emailing a President rather than the support team is not the best way I to go I would imagine.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
03-13-2024, 11:56 AM
|
#43
|
Senior Member
Join Date: Aug 2018
Location: WALNUT, California
Trailer: 2019 5.0 TA The Glass Inn
Posts: 231
|
I also have had issues with my Hehr awning windows. From day one they would rattle loose. Solved that with the pool noodle trick. Pool noodle cut about 1” thick, then cut across, wrap around the handle and it creates enough friction to hold things tight. The more serious issue that has crept up in the last year is the metal Rail on the window coming loose. I solved this problem by cleaning the metal rail and the window thoroughly. Then I got some VHB (Very High Bond) tape. I cut a piece of tape to fit the metal Rail and pressed it in place, then position it in the correct place on the window and pressed the two together. Held them together with spring clamps for an hour. So far they are holding just fine. I have had this happen to 4 windows. Hope you can solve your problems easily.
|
|
|
03-13-2024, 02:25 PM
|
#44
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by Jim Bennett
I have been dealing with a couple things lately, one broken window hardware and the other getting a Springfield pedestal for my brothers trailer. I got very fast response on both accounts. They sent me a couple window hardware pieces though now they don't use Hehr anymore they don't need them. With the pedestal they gave me a price to supply much better than I could find elsewhere, even shipped to Calgary.
BTW, emailing a President rather than the support team is not the best way I to go I would imagine.
|
How nice it worked out for you - didn't for me. BTW, I only emailed and hard copied the President AFTER I was dismissed by the support staff.
|
|
|
03-13-2024, 02:26 PM
|
#45
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Thank you remitch
|
|
|
03-13-2024, 06:36 PM
|
#46
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,554
|
Quote:
Originally Posted by Gumpdad714
How nice it worked out for you - didn't for me. BTW, I only emailed and hard copied the President AFTER I was dismissed by the support staff.
|
That really sounds odd that support staff would not help. Since 2009 I have never had trouble corresponding with Escape. Having Reace's cell number when he owned it was nice, but even since then a couple days when they were really busy was all. Maybe try sending a message to Kosta here to see if there is anything they could do.
As you likely know Hehr was bought out by Lippert, the brand Escape now uses.
Here is a bit of an email I got from Nicolas in support. He had to do a search to find out this info. He is great to deal with. Dustin is no longer there.
------------
Monday - Friday: 8AM - 7PM (ET)
432-LIPPERT (432-547-7378)
Failing that, this is the link that I found in a short search for longer cranks
https://www.pellandent.com/RV-Torque-Window-Parts
-------------------------------
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
03-13-2024, 08:05 PM
|
#47
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by Jim Bennett
That really sounds odd that support staff would not help. Since 2009 I have never had trouble corresponding with Escape. Having Reace's cell number when he owned it was nice, but even since then a couple days when they were really busy was all. Maybe try sending a message to Kosta here to see if there is anything they could do.
As you likely know Hehr was bought out by Lippert, the brand Escape now uses.
Here is a bit of an email I got from Nicolas in support. He had to do a search to find out this info. He is great to deal with. Dustin is no longer there.
------------
Monday - Friday: 8AM - 7PM (ET)
432-LIPPERT (432-547-7378)
Failing that, this is the link that I found in a short search for longer cranks
https://www.pellandent.com/RV-Torque-Window-Parts
-------------------------------
|
The link you sent will be very helpful, thanks. I've dealt with Nicolas, these issues were beyond him though. Gonna push my luck here - any advice for refrigerator door that keeps opening in transit. You were very fortunate to have dealt with Reace.
|
|
|
03-13-2024, 08:55 PM
|
#48
|
Senior Member
Join Date: May 2020
Location: Overbrook, Kansas
Trailer: 2021 E19 (Padawan)
Posts: 1,988
|
__________________
Randy & Barb
1998 C 2500 (Cruncher) and 2021 Ranger (Yoda)
|
|
|
03-14-2024, 08:24 AM
|
#49
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by brroberts
|
Thanks
|
|
|
03-14-2024, 10:16 AM
|
#50
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,554
|
Quote:
Originally Posted by Gumpdad714
Gonna push my luck here - any advice for refrigerator door that keeps opening in transit.
|
We, or any of a few others close to me, have never had an issue. We do ensure that we check to see if it is latched before taking off my pushing it tightly closed. No issues.
If you already do this I can only think there is an issue with the latch.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
03-14-2024, 12:41 PM
|
#51
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by Jim Bennett
We, or any of a few others close to me, have never had an issue. We do ensure that we check to see if it is latched before taking off my pushing it tightly closed. No issues.
If you already do this I can only think there is an issue with the latch.
|
I've seen a number of folks on here who have the same problem. Yes, it's an issue since the door is latched before we take off, but opens multiple times during transit. Lucky me, the latch is clearly broken.
|
|
|
03-15-2024, 11:51 AM
|
#52
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,554
|
Quote:
Originally Posted by Gumpdad714
I've seen a number of folks on here who have the same problem. Yes, it's an issue since the door is latched before we take off, but opens multiple times during transit. Lucky me, the latch is clearly broken.
|
Not sure what year your trailer is. I know some folks with the older style fridge in the Gen 1 trailers had issues with it opening, fortunately we were not one.
In the new style I find it clicks quite positively. That said, I do carry a replacement latching part just in case.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
03-15-2024, 12:39 PM
|
#53
|
Senior Member
Join Date: Jul 2015
Location: Fremont, California
Trailer: 2016 21/ '16 Tundra 4.6L Dbl. Cab
Posts: 1,564
|
Hi Grumpdad, I don’t know the model of your fridge, but you may have a latch like mine. The latch, just inside of the fridge door, slides back and forth. With the latch slid back, the door does not lock, but closes only with contact. When the latch is slid out, it creates a positive catch, and requires pushing the door buttons of the fridge or freezer to open. This is the only way we use the doors. Always locked and push buttons to open either the fridge door or the freezer door. Hope this helps. Cheers
__________________
Steve and Debbie
2016 - 21'
“Get out the map and lay your finger anywhere down” -Indigo Girls
|
|
|
03-15-2024, 04:06 PM
|
#54
|
Senior Member
Join Date: Jun 2014
Location: Winnipeg, Manitoba
Trailer: 2015 5.0TA, Toyota Tundra CrewMax
Posts: 636
|
Quote:
Originally Posted by Steve Clark
Hi Grumpdad, I don’t know the model of your fridge, but you may have a latch like mine. The latch, just inside of the fridge door, slides back and forth. With the latch slid back, the door does not lock, but closes only with contact. When the latch is slid out, it creates a positive catch, and requires pushing the door buttons of the fridge or freezer to open. This is the only way we use the doors. Always locked and push buttons to open either the fridge door or the freezer door. Hope this helps. Cheers
|
That is the only way we use ours too. They've never come open during travel.
We also put fridge tension bars like these on the front of each shelf so the contents don't push against the door.
__________________
Lyle
|
|
|
03-17-2024, 10:07 AM
|
#55
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by Jim Bennett
Not sure what year your trailer is. I know some folks with the older style fridge in the Gen 1 trailers had issues with it opening, fortunately we were not one.
In the new style I find it clicks quite positively. That said, I do carry a replacement latching part just in case.
|
I have a 2023 - brand new.
|
|
|
03-17-2024, 10:12 AM
|
#56
|
Senior Member
Join Date: Jul 2018
Location: Boulder, Colorado
Trailer: 2018 Escape 19'er + 2018 Highlander
Posts: 300
|
To keep one of our windows from working opened, I cut about 1-1/2" off the end of some inexpensive black pipe insulation (purchased at Home Depot) and stuff it behind the window opening knob. It prevents the knob from turning, tho' doesn't prevent me from turning the knob when I want to open the window. Total cost? Not much.
__________________
... Greg
2018 Escape 19'er & 2018 Highlander
Not all who wander are lost
|
|
|
03-17-2024, 11:44 AM
|
#57
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by EscapeBoulder
To keep one of our windows from working opened, I cut about 1-1/2" off the end of some inexpensive black pipe insulation (purchased at Home Depot) and stuff it behind the window opening knob. It prevents the knob from turning, tho' doesn't prevent me from turning the knob when I want to open the window. Total cost? Not much.
|
Thank you very much. Much appreciated. Will try that.
|
|
|
03-17-2024, 12:54 PM
|
#58
|
Junior Member
Join Date: Apr 2022
Location: Hereford, Texas
Trailer: 2023 5.0 (Casper)
Posts: 8
|
Quote:
Originally Posted by Gumpdad714
The link you sent will be very helpful, thanks. I've dealt with Nicolas, these issues were beyond him though. Gonna push my luck here - any advice for refrigerator door that keeps opening in transit. You were very fortunate to have dealt with Reace.
|
Our frig door was doing the same thing. The door was sagging, so the pin was not going up in the catch far enough. I found the hinge plate on the bottom was loose. I did a temporary fix by putting a wedge between the hinge plate and trim to push the door up. I later had time to pull frig out enough to adjust and tighten the hinge plate screws.
I hope this helps.
Dan
|
|
|
03-18-2024, 07:40 AM
|
#59
|
Member
Join Date: Mar 2023
Location: Queens, New York
Trailer: Escape 5.0
Posts: 42
|
Quote:
Originally Posted by iamunique127
That is the only way we use ours too. They've never come open during travel.
We also put fridge tension bars like these on the front of each shelf so the contents don't push against the door.
|
Thank you. I used them in the medicine cabinet. I really would like that refrigerator door to just stay shut.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|