Need a 21 pic of door side cubbies - Page 2 - Escape Trailer Owners Community

Go Back   Escape Trailer Owners Community > Escape Tech > Problem Solving | Owners helping each other
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 11-01-2014, 02:54 PM   #11
Senior Member
 
Join Date: Sep 2013
Location: Los Osos, California
Trailer: 2014 21 2013 Yukon
Posts: 2,419
Yes they do just like the bathroom door frame does. All storage boxes are the same.
__________________

Rossue is offline   Reply With Quote
Old 11-02-2014, 11:26 AM   #12
Senior Member
 
JohnB's Avatar
 
Join Date: Jan 2012
Location: Vancouver, British Columbia
Trailer: 2012 15A
Posts: 395
Quote:
Originally Posted by tractors1 View Post
More explain: I want a pattern to follow the outside wall shape between the entry door and the front bath wall. I know where the framing inside the bath wall is to use for attachment; was planning on taping to the entry door side fiberglass if possible (brown paper is stuck on the side of the door and held on by the blue tape.) Plan is to create those side pieces and attach a thinner plastic about a foot wide that follows the outside wall shape in order to have something to attach widgets to that.
Could you not make the pattern from the bathroom wall side or does the wall contour change too much in that short distance away from the door?
__________________

JohnB is offline   Reply With Quote
Old 11-02-2014, 11:37 AM   #13
Commercial Member
 
tractors1's Avatar
 
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,325
Quote:
Originally Posted by JohnB View Post
Could you not make the pattern from the bathroom wall side or does the wall contour change too much in that short distance away from the door?
I changed over to using that side but renegotiated the sizes of the cubby openings with wifey last night. Won't need to go all the way back to the fiberglass to pick up the bath side framing now.
__________________
Charlie Y

Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
tractors1 is offline   Reply With Quote
Old 11-02-2014, 12:05 PM   #14
Senior Member
 
paulw's Avatar
 
Join Date: Feb 2010
Location: Marysville, Washington
Trailer: 2014 Escape 21 & Chevy Silverado 5.3L EcoTec
Posts: 607
Norma & I are excited to see what you come up with for the 21 Charlie.
paulw is offline   Reply With Quote
Old 11-02-2014, 02:26 PM   #15
Commercial Member
 
tractors1's Avatar
 
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,325
One more question on the ETI cubbies option - the pic shows screws above the openings in the wood face - are each of the plastic holders inside open at the top? Looks like the screws must hold the top in of each plastic holder in place. If so, that's a LOT of wasted volume between white cubby parts.

If the top was open one could put taller stuff in each hole by pushing the top up through the open plastic and setting the item down behind the retaining lip.
__________________
Charlie Y

Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
tractors1 is offline   Reply With Quote
Old 11-02-2014, 04:00 PM   #16
Site Team
 
cpaharley2008's Avatar
 
Join Date: Jun 2010
Location: York, Pennsylvania
Trailer: 2016 2ndGen Escape 19' PRAIRIE SCHOONER pulled by 2014 Ram Hemi/8sp
Posts: 13,659
The cubbies are plastic bins turned on their sides with the 4 screws securing the corners to the front board. I removed mine in order to fish some led lights to my cubbies. Be very careful removing them, I recommend removing only one at a time as they can slip down into the recess.
__________________
Jim
The two most important days in your life are the day you were born and the day you find out why………..Mark Twain
cpaharley2008 is offline   Reply With Quote
Old 11-02-2014, 04:16 PM   #17
Commercial Member
 
tractors1's Avatar
 
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,325
Quote:
Originally Posted by cpaharley2008 View Post
The cubbies are plastic bins turned on their sides with the 4 screws securing the corners to the front board. I removed mine in order to fish some led lights to my cubbies. Be very careful removing them, I recommend removing only one at a time as they can slip down into the recess.
I'm planning on solvent welding mine to the back side of 2 36 inch tall removeable white ABS plastic panels. They're not going to be slipping!
__________________

__________________
Charlie Y

Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
tractors1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






» Virginia Campgrounds

Reviews provided by



All times are GMT -5. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.