|
|
12-05-2016, 01:53 PM
|
#161
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,567
|
Quote:
Originally Posted by tractors1
I had ETI just leave them off and added my own later.
|
This is my plan too.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
12-05-2016, 02:06 PM
|
#162
|
Senior Member
Join Date: Oct 2016
Location: Carrollton, Texas
Trailer: 2017 Escape 21, 2017 Toyota Tundra 5.7L 4x4
Posts: 549
|
Thanks for all the references on where you bought the items for your trailer mods. I'm keeping it all to use when we pick up our trailer.
On the side to side leveler installed by ETI, is it on the front of the trailer or the back of the trailer?
|
|
|
12-05-2016, 02:10 PM
|
#163
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by richardr
Thanks for all the references on where you bought the items for your trailer mods. I'm keeping it all to use when we pick up our trailer.
On the side to side leveler installed by ETI, is it on the front of the trailer or the back of the trailer?
|
rear is side to side, by the door is front to rear....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
12-05-2016, 02:50 PM
|
#164
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by richardr
On the side to side leveler installed by ETI, is it on the front of the trailer or the back of the trailer?
|
Sorry about the confusion: I mentioned the side-to-side level as being on the front (which is the location I'm used to), but Escape puts it on the back. It just needs to be on a vertical surface that runs across the trailer - it's on the back of the body, but it could be on the front of the body, or on an interior wall, or on a suitably oriented bracket on the frame or the tongue.
People using devices such as the BAL Tire Leveler would be better off with a level mounted near each wheel, but to mount on the side wall a bubble level indicator would need to stick out perpendicular to the trailer wall.
Bubble levels are cheap - I say stick another one anywhere you find it useful.
|
|
|
12-05-2016, 03:32 PM
|
#165
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
I found this to be very useful when alone to help leveling https://www.amazon.com/Camco-25505-E...railer+leveler
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
12-05-2016, 03:34 PM
|
#166
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
I'd like to see more discussion about how a bubble level could defy the laws of physics and not work properly. I know the level has to be mounted level, and once that's done, can't imagine what could go wrong.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
12-05-2016, 03:36 PM
|
#167
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by gbaglo
I'd like to see more discussion about how a bubble level could defy the laws of physics and not work properly. I know the level has to be mounted level, and once that's done, can't imagine what could go wrong.
|
Since they use tape adhesive, there is some movement, which I use to make the trailer level when it is "close enough for government work" set ups. So they can be played with a little.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
12-05-2016, 03:46 PM
|
#168
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Jim, I use the Camco EZ Level and love it. The flashing red light (low prong) to steady green lights (opposite prongs level) make it very intuitive and highly visible day or night. I caught it on "open box" sale at a Camping World store for $20.00 a few years back. Very useful tool and fun gadget to play with.
|
|
|
12-05-2016, 03:54 PM
|
#169
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,073
|
Quote:
Originally Posted by gbaglo
I'd like to see more discussion about how a bubble level could defy the laws of physics and not work properly. I know the level has to be mounted level, and once that's done, can't imagine what could go wrong.
|
The one I saw was Dave&Kathies... the bubble was stuck! Almost like the liquid was a solid and it couldn't move. Really strange.
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
12-05-2016, 04:02 PM
|
#170
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
I have a level app on my iPhone. Lets you choose type of level and is accurate as far as I can tell. Handy, cause it's always in my pocket.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
12-05-2016, 04:08 PM
|
#171
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Quote:
Originally Posted by gbaglo
I have a level app on my iPhone. Lets you choose type of level and is accurate as far as I can tell. Handy, cause it's always in my pocket.
|
How do you read it if it's in your pocket, does it talk?
|
|
|
12-05-2016, 04:49 PM
|
#172
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,567
|
Quote:
Originally Posted by cpaharley2008
Since they use tape adhesive, there is some movement, which I use to make the trailer level when it is "close enough for government work" set ups. So they can be played with a little.
|
Plus the adhesive is usual foam tape which makes it even less stable.
And more of this political talk. Careful, or you could get banned.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
12-05-2016, 04:54 PM
|
#173
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by gbaglo
I have a level app on my iPhone. Lets you choose type of level and is accurate as far as I can tell. Handy, cause it's always in my pocket.
|
Smartphones (of all brands and types) typically have tilt sensors (actually set of accelerometers...) so there are free apps to display the level. It would be ridiculous to buy a multi-hundred-dollar device to do this, but if you have the device anyway, this makes a lot of sense.
There are probably apps which let you place the phone down flat on a horizontal surface, and show front-to-rear and side-to-side tilt at the same time.
As mentioned earlier, the belly trim is a pretty good place to put the level (or phone) to check the trailer (one direction at a time).
|
|
|
12-05-2016, 04:56 PM
|
#174
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,873
|
Quote:
Originally Posted by gbaglo
I'd like to see more discussion about how a bubble level could defy the laws of physics and not work properly. I know the level has to be mounted level, and once that's done, can't imagine what could go wrong.
|
As others have said, it's the adhesive mounting that isn't completely stable and can cause the level to move out of position.
But sometimes in structures like this it's more a question of "What's level?". Do you base it on the floor, the counter top, the table? Often there's a difference, when one's level the other isn't.
When I built my own table legs I decided the floor would be my reference point for all thing's level. According to my 4' level on the floor the ETI "level" isn't.
Ron
|
|
|
12-05-2016, 09:40 PM
|
#175
|
Senior Member
Join Date: Jul 2014
Location: Houston, Texas
Trailer: '87 Bigfoot 20DLX 5er (sold) - 2017 Escape 5.0 TA: Sep-17
Posts: 523
|
The level that's on my Christmas wish list is electronic. It broadcasts to my iPhone and has excellent reviews. https://www.amazon.com/gp/aw/d/B01FG...=IF1J5FACNDOR0
This is a trend for me - applications that display on my iPhone:
-- TPMS
-- Remote thermometer
-- Back up camera
-- (soon) left-right/front back level
The thing these have on common is that all are "part time" apps. I don't need a constant display.
My trailer's rear view camera displays on my Garmin GPS (RV 760LTM)
|
|
|
12-05-2016, 10:03 PM
|
#176
|
Senior Member
Join Date: Feb 2013
Location: Myrnam, Alberta
Trailer: 2005 Aliner, 17B due in April/17
Posts: 372
|
I'm a big fan of the KISS principle! I have a small magnetic level. When levelling side to side, I sit it across the rear bumper. When doing front-to-back, I just sit it on the metal gram on the front and watch it as I adjust it. Seems to work.
Laura, thanks for the great info re: the backsplash.
|
|
|
12-06-2016, 07:27 AM
|
#177
|
Senior Member
Join Date: Jul 2014
Location: Houston, Texas
Trailer: '87 Bigfoot 20DLX 5er (sold) - 2017 Escape 5.0 TA: Sep-17
Posts: 523
|
"The Trailer" is home!
I took the RV Technical Education & Safety Conference last year. (Excellent event - very educational! I highly recomend it.) I don't remember if it was Gary Bunzer or one of the other lecturers, but the point he made was (in my words)...
We're leveling because of the refrigerator. People are more tolerant of unlevel than the fridge.
Therefore the ultimate test is whether the fridge is level. He suggested that we start with a level set in the bottom of the fridge. Adjust the trailer so it is perfect. This requires two people or (in my case) running in and out of the trailer bunch of times. Once the fridge is just right, install the outside level indicators. Now you can know the fridge is level using only the outside indicators.
I use a Hopkins 04115 on the front of my Bigfoot 5er. It has a metal ball in a track. I installed it with command strips.
I put an Anderson leveler under the tire on the low side and drive forward (or back) onto the Anderson until the metal ball is centered at the bottom of the track. Then I deploy the landing gear and crank both sides down until it's level front to back. Usually I'm alone so I crank one side down four or five turns, go to the other side and crank it the same number of tires. Back and forth between the jacks cranking until it's level. I will soooooo love the electric landing gear on my 5.0 TA!!!!!
Here's a link to the front leveler. (It included a little bubble indicator for the side of the trailer.) https://www.amazon.com/gp/aw/d/B000F...etal+Rear+View
|
|
|
12-06-2016, 07:28 AM
|
#178
|
Senior Member
Join Date: Mar 2013
Location: Asheville, North Carolina
Trailer: 2014 Escape 19
Posts: 895
|
Quote:
Originally Posted by ReagentGrade
The level that's on my Christmas wish list is electronic. It broadcasts to my iPhone and has excellent reviews. https://www.amazon.com/gp/aw/d/B01FG...=IF1J5FACNDOR0
This is a trend for me - applications that display on my iPhone:
-- TPMS
-- Remote thermometer
-- Back up camera
-- (soon) left-right/front back level
The thing these have on common is that all are "part time" apps. I don't need a constant display.
My trailer's rear view camera displays on my Garmin GPS (RV 760LTM)
|
When you travel alone, you have to "think out of the box." This along with the Anderson levelers should give me a viable way of leveling when I travel. Thanks for the suggestion and please comment on how it works when you get it set up.
__________________
Kevin
Thanks to the interstate highway system, it is now possible to travel across the country from coast to coast without seeing anything - Charles Kuralt
|
|
|
12-06-2016, 07:35 AM
|
#179
|
Senior Member
Join Date: Jul 2014
Location: Houston, Texas
Trailer: '87 Bigfoot 20DLX 5er (sold) - 2017 Escape 5.0 TA: Sep-17
Posts: 523
|
"The Trailer" is home!
Kevin,
If Santa brings it, I'll install it in my Bigfoot and give everyone a readout. If Santa skips my house, I may have to help him out.
You might also like to scroll up above your message to see the post I was editing while you posted. Anderson levelers are great!!
Rich
|
|
|
12-06-2016, 08:11 AM
|
#180
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,567
|
Quote:
Originally Posted by ReagentGrade
|
I have this one awaiting install on my 5.0 It mounts on the pin box, and does front to back levelling too.
Wheel Masters: Level Master
What I did on my temp trailer that worked quite well was to just use a 6" magnetic torpedo level hung from the frame under the loft. First on a cross member, and secondly lengthwise, to achieve level. Worked great.
We have learned over the years that close enough is good. We make sure our heads are level or a bit elevated, and all else is fine.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|