If you have nothing better to do, you can go to the thread started earlier today "Width Between Rear Seats in 2017B"
This is where the laundry pedestal thing came up. Thanks to good input from members of this forum, the laundry pedestal idea is likely not such a good one due to blocking the converter
Are you sure? I haven't seen good published cut out dimensions for the new SDS2. Assuming it is bigger and you have the depth you could enlarge your opening and install.
I agree. I think it would cover the old style 2 burner cut out.
__________________
So many modifications...so little time.
Are you sure? I haven't seen good published cut out dimensions for the new SDS2. Assuming it is bigger and you have the depth you could enlarge your opening and install.
Actually I reread the OP and the 17 can rotate. I read that and thought it was the other way around. Thanks for pointing that out. I'll have to see if I can retrofit it....would be nice as that is the stove like I originally wanted.
Photos of stove not installed in announcement thread: Escape forced to change stove
The hinge side is on the right in the photo and would of course be at the back in the normal orientation.
Here's one installed in a 17' (where it is rotated):
Hey Brian, what faucet do you have on your kitchen sink? I like that. Thanks
Hey Brian, what faucet do you have on your kitchen sink?
Sorry, not mine. I grabbed that from another thread, and forgot to link to the source. It is Jon & Adrienne's trailer, from their post (#1786) in the build photo thread.
Sorry, not mine. I grabbed that from another thread, and forgot to link to the source. It is Jon & Adrienne's trailer, from their post (#1786) in the build photo thread.