Hello All,
I had posted these pictures in another thread, when we bought are 2014 21C the previous owner had this custom aluminum box made and I LOVE IT. Now someone did note when I posted these pictures I need to vent it since propane tanks are in it (need to do that) but it really holds a lot of stuff.
Sorry really no idea and it's stored at our place on the lake so will be a couple of weeks before I see it so I could actually measure it for a good guesstemate.
Quick question. Any idea how much this box weights. Just curious as I’m looking to build one myself n replace the ETI custom storage box
I have an old one that I made years ago sitting in the shed. It's about the same size as the one pictured, just shallower front to back and it weights 25#. But it has 1/8" checker plate top.
Which raises the point: You could use 0.050" or 0.100" aluminum. The 0.100" would weight twice as much. It would be more resistant to being dented. So basically what gage you choose is going to be the major factor in what it weights.
we put a storage box on bought on eBay for $125 its not as wide but the 21ft doesn't have the batteries in it so its bout the same storage space ,it is also available at tractor supply but only in black, got the white one on eBay
we got ours on eBay its not as wide but there are no batteries in the box on the 21 footer, so bout the same storage, its also available at tractor supply but only in black, we got our white one on eBay
I also planned to measure the thickness but that would be the most difficult thing to measure since I don't think I have the device to do that. It is thicker aluminum and would take a pretty good whack to dent it. I will still measure it so you at least have the info.
Again, I love the box. I've seen the factory box and I don't like how thin it is, I have 4 different HDX plastic storage boxes and still plenty of room around them to stick other things. I have no idea what the tongue weight is but have been towing things for most of my life so can tell when driving if load is incorrect and never felt that while towing Grover.
If it seems like you'd really have to give a good wack to dent it it's probably an 1/8" or thicker.
This box was 0.060", pretty dent resistant except if it come in contact with your rear bumper.
0.100" is a good compromise. If you want to bend it yourself use 5052. Up to 0.060" it's easy to bend yourself, after that throw a few bucks at a local sheet metal shop to use their brake.
Hi the Box you saw was probably mine. We own the "Caboose" I did the Saturday night Tech talk along with Johnny Hung at the Rally. Pm me through the fb group if you have questions.
I love the box too, and I have it, but for over $1000 USD now, I’d be looking all over for alternatives too. I could fabricate something, but many could not. For those folks, I’d be looking places like Tractor Supply or Northern Tool.
__________________
Randy & Barb
1998 C 2500 (Cruncher) and 2021 Ranger (Yoda)
It has gone up a little more than the trailer percentage since we purchased, and I don’t know of a better aftermarket box, just cheaper. For many, at some point it just gets too expensive. You might want something, but settle for something else simply due to cost.
__________________
Randy & Barb
1998 C 2500 (Cruncher) and 2021 Ranger (Yoda)
Hello All,
I had posted these pictures in another thread, when we bought are 2014 21C the previous owner had this custom aluminum box made and I LOVE IT. Now someone did note when I posted these pictures I need to vent it since propane tanks are in it (need to do that) but it really holds a lot of stuff.
Enjoy the road and stay safe,
Steve
Nice storage bin. I am curious as to why you never had it powder coated to match the trailer. I had that done and really like it. I know, to each their own.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
Trailer: 2022 Escape 21C; 2018 Escape 19 (sold in 2022)
Posts: 405
What an awesome solution for a storage box for the 5.0! If we were going for a 5.0, I would definitely be interested in that. If it was not self-made, you may want to post where you got it.
What an awesome solution for a storage box for the 5.0! If we were going for a 5.0, I would definitely be interested in that. If it was not self-made, you may want to post where you got it.
I designed it and had it custom built out of aluminum and mounted to 2" receivers welded to the frame on each side.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln